At the moment we destroy the DTB mappings we have in setup_pagetables
and we don't restore them until setup_mm.
Keep the temporary DTB mapping until we create the new ones.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
xen/arch/arm/kernel.h | 2 ++
xen/arch/arm/mm.c | 12 ++++++++++++
xen/arch/arm/setup.c | 1 +
xen/include/asm-arm/mm.h | 2 ++
4 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/xen/arch/arm/kernel.h b/xen/arch/arm/kernel.h
index 4533568..a179ffb 100644
--- a/xen/arch/arm/kernel.h
+++ b/xen/arch/arm/kernel.h
@@ -38,4 +38,6 @@ struct kernel_info {
int kernel_prepare(struct kernel_info *info);
void kernel_load(struct kernel_info *info);
+extern char _sdtb[];
+
#endif /* #ifdef __ARCH_ARM_KERNEL_H__ */
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 0d7a163..2410794 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -34,6 +34,7 @@
#include <asm/current.h>
#include <public/memory.h>
#include <xen/sched.h>
+#include "kernel.h"
struct domain *dom_xen, *dom_io;
@@ -295,12 +296,23 @@ void __init setup_pagetables(unsigned long boot_phys_offset, paddr_t xen_paddr)
write_pte(xen_second + second_linear_offset(XEN_VIRT_START), pte);
/* TLBFLUSH and ISB would be needed here, but wait until we set WXN */
+ /* preserve the DTB mapping a little while longer */
+ pte = mfn_to_xen_entry(((unsigned long) _sdtb + boot_phys_offset) >> PAGE_SHIFT);
+ write_pte(xen_second + second_linear_offset(BOOT_MISC_VIRT_START), pte);
+
/* From now on, no mapping may be both writable and executable. */
WRITE_CP32(READ_CP32(HSCTLR) | SCTLR_WXN, HSCTLR);
/* Flush everything after setting WXN bit. */
flush_xen_text_tlb();
}
+void __init destroy_dtb_mapping(void)
+{
+ /* destroy old DTB mapping */
+ xen_second[second_linear_offset(BOOT_MISC_VIRT_START)].bits = 0;
+ dsb();
+}
+
/* MMU setup for secondary CPUS (which already have paging enabled) */
void __cpuinit mmu_init_secondary_cpu(void)
{
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 2076724..06a878f 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -229,6 +229,7 @@ void __init start_xen(unsigned long boot_phys_offset,
init_xen_time();
+ destroy_dtb_mapping();
setup_mm(atag_paddr, fdt_size);
/* Setup Hyp vector base */
diff --git a/xen/include/asm-arm/mm.h b/xen/include/asm-arm/mm.h
index 4ed5df6..6fa4308 100644
--- a/xen/include/asm-arm/mm.h
+++ b/xen/include/asm-arm/mm.h
@@ -139,6 +139,8 @@ extern unsigned long total_pages;
/* Boot-time pagetable setup */
extern void setup_pagetables(unsigned long boot_phys_offset, paddr_t xen_paddr);
+/* Destroy temporary DTB mapping */
+extern void destroy_dtb_mapping(void);
/* MMU setup for seccondary CPUS (which already have paging enabled) */
extern void __cpuinit mmu_init_secondary_cpu(void);
/* Set up the xenheap: up to 1GB of contiguous, always-mapped memory.
--
1.7.2.5
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel
and we don't restore them until setup_mm.
Keep the temporary DTB mapping until we create the new ones.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
xen/arch/arm/kernel.h | 2 ++
xen/arch/arm/mm.c | 12 ++++++++++++
xen/arch/arm/setup.c | 1 +
xen/include/asm-arm/mm.h | 2 ++
4 files changed, 17 insertions(+), 0 deletions(-)
diff --git a/xen/arch/arm/kernel.h b/xen/arch/arm/kernel.h
index 4533568..a179ffb 100644
--- a/xen/arch/arm/kernel.h
+++ b/xen/arch/arm/kernel.h
@@ -38,4 +38,6 @@ struct kernel_info {
int kernel_prepare(struct kernel_info *info);
void kernel_load(struct kernel_info *info);
+extern char _sdtb[];
+
#endif /* #ifdef __ARCH_ARM_KERNEL_H__ */
diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
index 0d7a163..2410794 100644
--- a/xen/arch/arm/mm.c
+++ b/xen/arch/arm/mm.c
@@ -34,6 +34,7 @@
#include <asm/current.h>
#include <public/memory.h>
#include <xen/sched.h>
+#include "kernel.h"
struct domain *dom_xen, *dom_io;
@@ -295,12 +296,23 @@ void __init setup_pagetables(unsigned long boot_phys_offset, paddr_t xen_paddr)
write_pte(xen_second + second_linear_offset(XEN_VIRT_START), pte);
/* TLBFLUSH and ISB would be needed here, but wait until we set WXN */
+ /* preserve the DTB mapping a little while longer */
+ pte = mfn_to_xen_entry(((unsigned long) _sdtb + boot_phys_offset) >> PAGE_SHIFT);
+ write_pte(xen_second + second_linear_offset(BOOT_MISC_VIRT_START), pte);
+
/* From now on, no mapping may be both writable and executable. */
WRITE_CP32(READ_CP32(HSCTLR) | SCTLR_WXN, HSCTLR);
/* Flush everything after setting WXN bit. */
flush_xen_text_tlb();
}
+void __init destroy_dtb_mapping(void)
+{
+ /* destroy old DTB mapping */
+ xen_second[second_linear_offset(BOOT_MISC_VIRT_START)].bits = 0;
+ dsb();
+}
+
/* MMU setup for secondary CPUS (which already have paging enabled) */
void __cpuinit mmu_init_secondary_cpu(void)
{
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 2076724..06a878f 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -229,6 +229,7 @@ void __init start_xen(unsigned long boot_phys_offset,
init_xen_time();
+ destroy_dtb_mapping();
setup_mm(atag_paddr, fdt_size);
/* Setup Hyp vector base */
diff --git a/xen/include/asm-arm/mm.h b/xen/include/asm-arm/mm.h
index 4ed5df6..6fa4308 100644
--- a/xen/include/asm-arm/mm.h
+++ b/xen/include/asm-arm/mm.h
@@ -139,6 +139,8 @@ extern unsigned long total_pages;
/* Boot-time pagetable setup */
extern void setup_pagetables(unsigned long boot_phys_offset, paddr_t xen_paddr);
+/* Destroy temporary DTB mapping */
+extern void destroy_dtb_mapping(void);
/* MMU setup for seccondary CPUS (which already have paging enabled) */
extern void __cpuinit mmu_init_secondary_cpu(void);
/* Set up the xenheap: up to 1GB of contiguous, always-mapped memory.
--
1.7.2.5
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel