I retried openvswitch on Wheezy 64 bit dom0 with xen 4.2.0-rc4 from source
vif script taken from here:
http://xen.1045712.n5.nabble.com/openvswitch-on-xen-4-x-td4662995.html
Network works on dom0 and domU hvm windows 7 but on shutdown/destroy
shows this error:
xl destroy W7
libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus:
/etc/xen/scripts/vif-bridgeovs offline [4266] exited with error status 1
libxl: error: libxl_device.c:978:device_hotplug_child_death_cb: script:
/etc/xen/scripts/vif-bridgeovs failed; error detected.
Probably script need to be updated for xen 4.2 but I don't know exactly
Here my dom0 network configuration:
--------------------------------------------------
/etc/network/interfaces
---------------------------------
auto eth0
allow-hotplug eth0
iface eth0 inet manual
up ip link set up dev eth0
down ip link set down dev eth0
auto eth1
allow-hotplug eth1
iface eth1 inet manual
up ip link set up dev eth1
down ip link set down dev eth1
allow-ovs xenbr0
iface xenbr0 inet static
address 192.168.1.30
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.200
ovs_type OVSBridge
ovs_ports bond0
allow-xenbr0 bond0
iface bond0 inet manual
ovs_bridge xenbr0
ovs_type OVSBond
ovs_bonds eth0 eth1
ovs_options bond_mode=balance-tcp lacp=active
--------------------------------------------------
ifup --allow=ovs xenbr0 for start network
vif script taken from here:
http://xen.1045712.n5.nabble.com/openvswitch-on-xen-4-x-td4662995.html
Network works on dom0 and domU hvm windows 7 but on shutdown/destroy
shows this error:
xl destroy W7
libxl: error: libxl_exec.c:118:libxl_report_child_exitstatus:
/etc/xen/scripts/vif-bridgeovs offline [4266] exited with error status 1
libxl: error: libxl_device.c:978:device_hotplug_child_death_cb: script:
/etc/xen/scripts/vif-bridgeovs failed; error detected.
Probably script need to be updated for xen 4.2 but I don't know exactly
Here my dom0 network configuration:
--------------------------------------------------
/etc/network/interfaces
---------------------------------
auto eth0
allow-hotplug eth0
iface eth0 inet manual
up ip link set up dev eth0
down ip link set down dev eth0
auto eth1
allow-hotplug eth1
iface eth1 inet manual
up ip link set up dev eth1
down ip link set down dev eth1
allow-ovs xenbr0
iface xenbr0 inet static
address 192.168.1.30
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.200
ovs_type OVSBridge
ovs_ports bond0
allow-xenbr0 bond0
iface bond0 inet manual
ovs_bridge xenbr0
ovs_type OVSBond
ovs_bonds eth0 eth1
ovs_options bond_mode=balance-tcp lacp=active
--------------------------------------------------
ifup --allow=ovs xenbr0 for start network