The subject says it all.
I'm using rocks cluster software to startup a small blade cluster in my
lab. The blades I have redboot installed on them. I am able to boot
any client that has pxeboot capability using my setup, except for these
blades. My thoughs were using redboot commands to do the following:
1. load -v -r -b 0x8000000 -h 10.1.1.1 pxelinux.0
2. start
This however caused my blade to reboot spontaneously. Should have known
it couldn't be that easy.
Has anyone attempted this before? Thanks in advance.
Rich Maes
Lead Systems Engineer
Isothermal Systems Research, Inc.
office: 509-232-3458
mobile: 509-701-1356
www.spraycool.com <BLOCKED::http://www.spraycool.com/>
_______________________________________________
SYSLINUX mailing list
Submissions to SYSLINUX@zytor.com
Unsubscribe or set options at:
http://www.zytor.com/mailman/listinfo/syslinux
Please do not send private replies to mailing list traffic.
I'm using rocks cluster software to startup a small blade cluster in my
lab. The blades I have redboot installed on them. I am able to boot
any client that has pxeboot capability using my setup, except for these
blades. My thoughs were using redboot commands to do the following:
1. load -v -r -b 0x8000000 -h 10.1.1.1 pxelinux.0
2. start
This however caused my blade to reboot spontaneously. Should have known
it couldn't be that easy.
Has anyone attempted this before? Thanks in advance.
Rich Maes
Lead Systems Engineer
Isothermal Systems Research, Inc.
office: 509-232-3458
mobile: 509-701-1356
www.spraycool.com <BLOCKED::http://www.spraycool.com/>
_______________________________________________
SYSLINUX mailing list
Submissions to SYSLINUX@zytor.com
Unsubscribe or set options at:
http://www.zytor.com/mailman/listinfo/syslinux
Please do not send private replies to mailing list traffic.