Mailing List Archive

Maybe the space between Username and : is giving problems:

log2# grep Username clogin
# Username
# Enable Username
if { "$u_prompt" == "" } { set u_prompt "(Username|Login|login|user
name):" }
log2# telnet 10.51.5.254
Trying 10.51.5.254...
Connected to 10.51.5.254.
Escape character is '^]'.


User Access Verification

Username:

-----Original Message-----
From: Joshua Wright [mailto:Joshua.Wright@jwu.edu]
Sent: Friday, March 15, 2002 9:16 AM
To: 'rancid-discuss at shrubbery.net'
Subject: clogin not logging into Cisco router


First, thanks for such a terrific tool. I have used RANCID 2.2 on a few
FreeBSD boxes and have always been very happy with its results.

I am trying to get RANCID 2.2 working on a Solaris machine, and am
running
into some troubles. Here are my vitals:

$ uname -a
SunOS george.services.brown.edu 5.8 Generic sun4u sparc SUNW,Ultra-5_10
$ ls -l `which tclsh`
lrwxrwxrwx 1 root other 8 Oct 5 1999
/usr/local/bin/tclsh
-> tclsh8.0*
$ expect -v
expect version 5.28.1
$ perl -v

This is perl, version 5.005_03 built for sun4-solaris
<snip>
$

Running "rancid -d router.mydomain.com" results in:

$ rancid -d router.mydomain.com
executing clogin -t 90 -c"show version;show install active;show env
all;show
gsr chassis;show boot;show bootvar;show variables boot;show flash;dir
/all
nvram:;dir /all bootflash:;dir /all slot0:;dir /all disk0:;dir /all
slot1:;dir /all disk1:;dir /all sup-bootflash:;dir /all
sup-microcode:;show
controllers;show controllers cbus;show diagbus;show diag;show
module;show
c7200;show vtp status;show vlan;write term" router.mydomain.com
router.mydomain.com clogin error: Error: TIMEOUT reached
router.mydomain.com clogin error: Error: TIMEOUT reached
router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
bootflash:,show env all,show controllers cbus,dir /all nvram:,show
module,show version,dir /all sup-bootflash:,show c7200,show variables
boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
status
router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
bootflash:,show env all,show controllers cbus,dir /all nvram:,show
module,show version,dir /all sup-bootflash:,show c7200,show variables
boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
status
router.mydomain.com: End of run not found
router.mydomain.com: End of run not found
!
$

Running "clogin -c "sh bootvar" router.mydomain.com"

$ clogin -c "sh bootvar" router.mydomain.com
router.mydomain.com
spawn telnet router.mydomain.com
Trying 1.1.1.1...
Connected to router.
Escape character is '^]'.

Username :
% Username : timeout expired!
Username :
Error: TIMEOUT reached
$

Checking into the README, I am running >Solaris 2.6 so the patches don't
apply. I don't think the problems with Linux+expect/tcl apply to me
either.
Contents of my .cloginrc file are as follows:

add autoenable *.mydomain.com 1
add user *.mydomain.com username
add password *.mydomain.com password

I have verified the username and password are correct. The output from
clogin appears that expect isn't passing the login information, any
thoughts
as to why?

Thanks very much.


-Joshua Wright
Team Leader, Networks and Systems
Johnson & Wales University
Joshua.Wright at jwu.edu

pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73

I tried adding a prompt to my .cloginrc file as follows:

$ more .cloginrc
add autoenable *.mydomain.com 1
add user *.mydomain.com username
add password *.mydomain.com password
add prompt *.mydomain.com {"Username :"}
$ clogin -c "sh bootvar" router.mydomain.com
router.mydomain.com
spawn telnet router.mydomain.com
Trying 1.1.1.1...
Connected to router.
Escape character is '^]'.

Username :
% Username : timeout expired!
Username :
Error: TIMEOUT reached
$


Still no go. Do I have the syntax incorrect for "add prompt"?

Thanks.

-Joshua Wright
Team Leader, Networks and Systems
Johnson & Wales University
Joshua.Wright at jwu.edu

pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73


-----Original Message-----
From: Zhang, Anchi [mailto:AZhang@reliant.com]
Sent: Friday, March 15, 2002 1:09 PM
To: Joshua Wright; rancid-discuss at shrubbery.net
Subject: RE: clogin not logging into Cisco router


Maybe the space between Username and : is giving problems:

log2# grep Username clogin
# Username
# Enable Username
if { "$u_prompt" == "" } { set u_prompt "(Username|Login|login|user
name):" }
log2# telnet 10.51.5.254
Trying 10.51.5.254...
Connected to 10.51.5.254.
Escape character is '^]'.


User Access Verification

Username:

-----Original Message-----
From: Joshua Wright [mailto:Joshua.Wright@jwu.edu]
Sent: Friday, March 15, 2002 9:16 AM
To: 'rancid-discuss at shrubbery.net'
Subject: clogin not logging into Cisco router


First, thanks for such a terrific tool. I have used RANCID 2.2 on a few
FreeBSD boxes and have always been very happy with its results.

I am trying to get RANCID 2.2 working on a Solaris machine, and am
running
into some troubles. Here are my vitals:

$ uname -a
SunOS george.services.brown.edu 5.8 Generic sun4u sparc SUNW,Ultra-5_10
$ ls -l `which tclsh`
lrwxrwxrwx 1 root other 8 Oct 5 1999
/usr/local/bin/tclsh
-> tclsh8.0*
$ expect -v
expect version 5.28.1
$ perl -v

This is perl, version 5.005_03 built for sun4-solaris
<snip>
$

Running "rancid -d router.mydomain.com" results in:

$ rancid -d router.mydomain.com
executing clogin -t 90 -c"show version;show install active;show env
all;show
gsr chassis;show boot;show bootvar;show variables boot;show flash;dir
/all
nvram:;dir /all bootflash:;dir /all slot0:;dir /all disk0:;dir /all
slot1:;dir /all disk1:;dir /all sup-bootflash:;dir /all
sup-microcode:;show
controllers;show controllers cbus;show diagbus;show diag;show
module;show
c7200;show vtp status;show vlan;write term" router.mydomain.com
router.mydomain.com clogin error: Error: TIMEOUT reached
router.mydomain.com clogin error: Error: TIMEOUT reached
router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
bootflash:,show env all,show controllers cbus,dir /all nvram:,show
module,show version,dir /all sup-bootflash:,show c7200,show variables
boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
status
router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
bootflash:,show env all,show controllers cbus,dir /all nvram:,show
module,show version,dir /all sup-bootflash:,show c7200,show variables
boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
status
router.mydomain.com: End of run not found
router.mydomain.com: End of run not found
!
$

Running "clogin -c "sh bootvar" router.mydomain.com"

$ clogin -c "sh bootvar" router.mydomain.com
router.mydomain.com
spawn telnet router.mydomain.com
Trying 1.1.1.1...
Connected to router.
Escape character is '^]'.

Username :
% Username : timeout expired!
Username :
Error: TIMEOUT reached
$

Checking into the README, I am running >Solaris 2.6 so the patches don't
apply. I don't think the problems with Linux+expect/tcl apply to me
either.
Contents of my .cloginrc file are as follows:

add autoenable *.mydomain.com 1
add user *.mydomain.com username
add password *.mydomain.com password

I have verified the username and password are correct. The output from
clogin appears that expect isn't passing the login information, any
thoughts
as to why?

Thanks very much.


-Joshua Wright
Team Leader, Networks and Systems
Johnson & Wales University
Joshua.Wright at jwu.edu

pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73

I have no experience in add prompt. How did you get to have the
"Username :" prompt? Did you change it through your AAA server?

Anchi

-----Original Message-----
From: Joshua Wright [mailto:Joshua.Wright@jwu.edu]
Sent: Friday, March 15, 2002 12:47 PM
To: Zhang, Anchi; Joshua Wright; rancid-discuss at shrubbery.net
Subject: RE: clogin not logging into Cisco router


I tried adding a prompt to my .cloginrc file as follows:

$ more .cloginrc
add autoenable *.mydomain.com 1
add user *.mydomain.com username
add password *.mydomain.com password
add prompt *.mydomain.com {"Username :"}
$ clogin -c "sh bootvar" router.mydomain.com
router.mydomain.com
spawn telnet router.mydomain.com
Trying 1.1.1.1...
Connected to router.
Escape character is '^]'.

Username :
% Username : timeout expired!
Username :
Error: TIMEOUT reached
$


Still no go. Do I have the syntax incorrect for "add prompt"?

Thanks.

-Joshua Wright
Team Leader, Networks and Systems
Johnson & Wales University
Joshua.Wright at jwu.edu

pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73


-----Original Message-----
From: Zhang, Anchi [mailto:AZhang@reliant.com]
Sent: Friday, March 15, 2002 1:09 PM
To: Joshua Wright; rancid-discuss at shrubbery.net
Subject: RE: clogin not logging into Cisco router


Maybe the space between Username and : is giving problems:

log2# grep Username clogin
# Username
# Enable Username
if { "$u_prompt" == "" } { set u_prompt "(Username|Login|login|user
name):" }
log2# telnet 10.51.5.254
Trying 10.51.5.254...
Connected to 10.51.5.254.
Escape character is '^]'.


User Access Verification

Username:

-----Original Message-----
From: Joshua Wright [mailto:Joshua.Wright@jwu.edu]
Sent: Friday, March 15, 2002 9:16 AM
To: 'rancid-discuss at shrubbery.net'
Subject: clogin not logging into Cisco router


First, thanks for such a terrific tool. I have used RANCID 2.2 on a few
FreeBSD boxes and have always been very happy with its results.

I am trying to get RANCID 2.2 working on a Solaris machine, and am
running
into some troubles. Here are my vitals:

$ uname -a
SunOS george.services.brown.edu 5.8 Generic sun4u sparc SUNW,Ultra-5_10
$ ls -l `which tclsh`
lrwxrwxrwx 1 root other 8 Oct 5 1999
/usr/local/bin/tclsh
-> tclsh8.0*
$ expect -v
expect version 5.28.1
$ perl -v

This is perl, version 5.005_03 built for sun4-solaris
<snip>
$

Running "rancid -d router.mydomain.com" results in:

$ rancid -d router.mydomain.com
executing clogin -t 90 -c"show version;show install active;show env
all;show
gsr chassis;show boot;show bootvar;show variables boot;show flash;dir
/all
nvram:;dir /all bootflash:;dir /all slot0:;dir /all disk0:;dir /all
slot1:;dir /all disk1:;dir /all sup-bootflash:;dir /all
sup-microcode:;show
controllers;show controllers cbus;show diagbus;show diag;show
module;show
c7200;show vtp status;show vlan;write term" router.mydomain.com
router.mydomain.com clogin error: Error: TIMEOUT reached
router.mydomain.com clogin error: Error: TIMEOUT reached
router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
bootflash:,show env all,show controllers cbus,dir /all nvram:,show
module,show version,dir /all sup-bootflash:,show c7200,show variables
boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
status
router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
bootflash:,show env all,show controllers cbus,dir /all nvram:,show
module,show version,dir /all sup-bootflash:,show c7200,show variables
boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
status
router.mydomain.com: End of run not found
router.mydomain.com: End of run not found
!
$

Running "clogin -c "sh bootvar" router.mydomain.com"

$ clogin -c "sh bootvar" router.mydomain.com
router.mydomain.com
spawn telnet router.mydomain.com
Trying 1.1.1.1...
Connected to router.
Escape character is '^]'.

Username :
% Username : timeout expired!
Username :
Error: TIMEOUT reached
$

Checking into the README, I am running >Solaris 2.6 so the patches don't
apply. I don't think the problems with Linux+expect/tcl apply to me
either.
Contents of my .cloginrc file are as follows:

add autoenable *.mydomain.com 1
add user *.mydomain.com username
add password *.mydomain.com password

I have verified the username and password are correct. The output from
clogin appears that expect isn't passing the login information, any
thoughts
as to why?

Thanks very much.


-Joshua Wright
Team Leader, Networks and Systems
Johnson & Wales University
Joshua.Wright at jwu.edu

pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73

On Fri, Mar 15, 2002 at 01:47:24PM -0500, Joshua Wright wrote:
> add prompt *.mydomain.com {"Username :"}

You want userprompt.

Bits of clogin:
# Figure out prompts
set u_prompt [find userprompt $router]
if { "$u_prompt" == "" } { set u_prompt "(Username|Login|login|user name):"}
set p_prompt [find passprompt $router]
if { "$p_prompt" == "" } { set p_prompt "(\[Pp]assword|passwd):" }
set e_prompt [find enableprompt $router]
if { "$e_prompt" == "" } { set e_prompt "\[Pp]assword:" }

--asp

Fri, Mar 15, 2002 at 01:00:51PM -0600, Zhang, Anchi:
> I have no experience in add prompt. How did you get to have the
> "Username :" prompt? Did you change it through your AAA server?

i believe, for most cisco products, AAA is the only method to alter
the prompt. my advice, wrt rancid and automation, is to leave it
alone. altering it adds zero value.

> Anchi
>
> -----Original Message-----
> From: Joshua Wright [mailto:Joshua.Wright at jwu.edu]
> Sent: Friday, March 15, 2002 12:47 PM
> To: Zhang, Anchi; Joshua Wright; rancid-discuss at shrubbery.net
> Subject: RE: clogin not logging into Cisco router
>
>
> I tried adding a prompt to my .cloginrc file as follows:
>
> $ more .cloginrc
> add autoenable *.mydomain.com 1
> add user *.mydomain.com username
> add password *.mydomain.com password
> add prompt *.mydomain.com {"Username :"}
> $ clogin -c "sh bootvar" router.mydomain.com
> router.mydomain.com
> spawn telnet router.mydomain.com
> Trying 1.1.1.1...
> Connected to router.
> Escape character is '^]'.
>
> Username :
> % Username : timeout expired!
> Username :
> Error: TIMEOUT reached
> $
>
>
> Still no go. Do I have the syntax incorrect for "add prompt"?
>
> Thanks.
>
> -Joshua Wright
> Team Leader, Networks and Systems
> Johnson & Wales University
> Joshua.Wright at jwu.edu
>
> pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
> fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73
>
>
> -----Original Message-----
> From: Zhang, Anchi [mailto:AZhang at reliant.com]
> Sent: Friday, March 15, 2002 1:09 PM
> To: Joshua Wright; rancid-discuss at shrubbery.net
> Subject: RE: clogin not logging into Cisco router
>
>
> Maybe the space between Username and : is giving problems:
>
> log2# grep Username clogin
> # Username
> # Enable Username
> if { "$u_prompt" == "" } { set u_prompt "(Username|Login|login|user
> name):" }
> log2# telnet 10.51.5.254
> Trying 10.51.5.254...
> Connected to 10.51.5.254.
> Escape character is '^]'.
>
>
> User Access Verification
>
> Username:
>
> -----Original Message-----
> From: Joshua Wright [mailto:Joshua.Wright at jwu.edu]
> Sent: Friday, March 15, 2002 9:16 AM
> To: 'rancid-discuss at shrubbery.net'
> Subject: clogin not logging into Cisco router
>
>
> First, thanks for such a terrific tool. I have used RANCID 2.2 on a few
> FreeBSD boxes and have always been very happy with its results.
>
> I am trying to get RANCID 2.2 working on a Solaris machine, and am
> running
> into some troubles. Here are my vitals:
>
> $ uname -a
> SunOS george.services.brown.edu 5.8 Generic sun4u sparc SUNW,Ultra-5_10
> $ ls -l `which tclsh`
> lrwxrwxrwx 1 root other 8 Oct 5 1999
> /usr/local/bin/tclsh
> -> tclsh8.0*
> $ expect -v
> expect version 5.28.1
> $ perl -v
>
> This is perl, version 5.005_03 built for sun4-solaris
> <snip>
> $
>
> Running "rancid -d router.mydomain.com" results in:
>
> $ rancid -d router.mydomain.com
> executing clogin -t 90 -c"show version;show install active;show env
> all;show
> gsr chassis;show boot;show bootvar;show variables boot;show flash;dir
> /all
> nvram:;dir /all bootflash:;dir /all slot0:;dir /all disk0:;dir /all
> slot1:;dir /all disk1:;dir /all sup-bootflash:;dir /all
> sup-microcode:;show
> controllers;show controllers cbus;show diagbus;show diag;show
> module;show
> c7200;show vtp status;show vlan;write term" router.mydomain.com
> router.mydomain.com clogin error: Error: TIMEOUT reached
> router.mydomain.com clogin error: Error: TIMEOUT reached
> router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
> bootflash:,show env all,show controllers cbus,dir /all nvram:,show
> module,show version,dir /all sup-bootflash:,show c7200,show variables
> boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
> slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
> sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
> status
> router.mydomain.com: missed cmd(s): show diagbus,write term,dir /all
> bootflash:,show env all,show controllers cbus,dir /all nvram:,show
> module,show version,dir /all sup-bootflash:,show c7200,show variables
> boot,show flash,show vlan,dir /all slot0:,show install active,dir /all
> slot1:,show boot,show diag,show controllers,show gsr chassis,dir /all
> sup-microcode:,dir /all disk0:,dir /all disk1:,show bootvar,show vtp
> status
> router.mydomain.com: End of run not found
> router.mydomain.com: End of run not found
> !
> $
>
> Running "clogin -c "sh bootvar" router.mydomain.com"
>
> $ clogin -c "sh bootvar" router.mydomain.com
> router.mydomain.com
> spawn telnet router.mydomain.com
> Trying 1.1.1.1...
> Connected to router.
> Escape character is '^]'.
>
> Username :
> % Username : timeout expired!
> Username :
> Error: TIMEOUT reached
> $
>
> Checking into the README, I am running >Solaris 2.6 so the patches don't
> apply. I don't think the problems with Linux+expect/tcl apply to me
> either.
> Contents of my .cloginrc file are as follows:
>
> add autoenable *.mydomain.com 1
> add user *.mydomain.com username
> add password *.mydomain.com password
>
> I have verified the username and password are correct. The output from
> clogin appears that expect isn't passing the login information, any
> thoughts
> as to why?
>
> Thanks very much.
>
>
> -Joshua Wright
> Team Leader, Networks and Systems
> Johnson & Wales University
> Joshua.Wright at jwu.edu
>
> pgpkey: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xD44B4A73
> fingerprint: FDA5 12FC F391 3740 E0AE BDB6 8FE2 FC0A D44B 4A73