Mailing List Archive

Hi,
I have a Cisco 7206 that I can't collect config from.
Seems to be a problem with the command "dir /all bootflash:"

E34C9-7206-01#dir /all bootflash:
Directory of bootflash:/

%Error calling getdents for bootflash:/ (Invalid file header magic number)
No space information available
E34C9-7206-01#


Clues, anyone?


Best regards,
S?ren Hansen

I have done a rancid -d <device> as seen below. The .new file is at the end


rancid at lanwan-mon$ rancid -d 10.17.2.7
executing clogin -t 90 -c"show version;show redundancy secondary;show
idprom backplane;show install active;show env all;show rsp
chassis-info;show gsr chassis;show boot;show bootvar;show variables
boot;show flash;dir /all nvram:;dir /all bootflash:;dir /all slot0:;dir
/all disk0:;dir /all slot1:;dir /all disk1:;dir /all slot2:;dir /all
disk2:;dir /all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir
/all sup-bootflash:;dir /all sup-microcode:;dir /all slavenvram:;dir
/all slavebootflash:;dir /all slaveslot0:;dir /all slavedisk0:;dir /all
slaveslot1:;dir /all slavedisk1:;dir /all slaveslot2:;dir /all
slavedisk2:;dir /all slavesup-bootflash:;dir /all sec-nvram:;dir /all
sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all
sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all
sec-disk2:;show controllers;show controllers cbus;show diagbus;show
diag;show module;show spe version;show c7200;show vtp status;show
vlan;show running-config;write term" 10.17.2.7
PROMPT MATCH: E34C9-7206-01#
HIT COMMAND:E34C9-7206-01#show version
In ShowVersion: E34C9-7206-01#show version
TYPE = 7200
HIT COMMAND:E34C9-7206-01#show redundancy secondary
In ShowRedundancy: E34C9-7206-01#show redundancy secondary
HIT COMMAND:E34C9-7206-01#show idprom backplane
In ShowIDprom: E34C9-7206-01#show idprom backplane
HIT COMMAND:E34C9-7206-01#show install active
In ShowInstallActive: E34C9-7206-01#show install active
HIT COMMAND:E34C9-7206-01#show env all
In ShowEnv: E34C9-7206-01#show env all
HIT COMMAND:E34C9-7206-01#show rsp chassis-info
In ShowRSP: E34C9-7206-01#show rsp chassis-info
HIT COMMAND:E34C9-7206-01#show gsr chassis
In ShowGSR: E34C9-7206-01#show gsr chassis
HIT COMMAND:E34C9-7206-01#show boot
In ShowBoot: E34C9-7206-01#show boot
HIT COMMAND:E34C9-7206-01#show bootvar
In ShowBoot: E34C9-7206-01#show bootvar
HIT COMMAND:E34C9-7206-01#show variables boot
In ShowBoot: E34C9-7206-01#show variables boot
HIT COMMAND:E34C9-7206-01#show flash
In ShowFlash: E34C9-7206-01#show flash
HIT COMMAND:E34C9-7206-01#dir /all nvram:
In DirSlotN: E34C9-7206-01#dir /all nvram:
HIT COMMAND:E34C9-7206-01#dir /all bootflash:
In DirSlotN: E34C9-7206-01#dir /all bootflash:
write(spawn_id=1): broken pipe
while executing
"send_user -- "$expect_out(buffer)""
invoked from within
"expect -nobrace -re+ { exp_continue } -re {^[^
*]*E34C9-7206-01([^#>\r\n]+)?[#>](\([^)\r\n]+\))?} { send_user --
"$expect_out(buffer)"
} -re..."
invoked from within
"expect {
-re "\b+" { exp_continue }
-re "^\[^\n\r *]*$reprompt" { send_user --
"$expect_out(buffer)"
}
-re "^\[^\n\r]*$reprompt." { send..."
invoked from within
"if [ string match "*\;*" "$command" ] {
set commands [split $command \;]
set num_commands [llength $commands]
# the pager can not be turned off on ..."
(procedure "run_commands" line 34)
invoked from within
"run_commands $prompt $command"
("foreach" body line 144)
invoked from within
"foreach router [lrange $argv $i end] {
set router [string tolower $router]
send_user "$router\n"

# Figure out prompt.
# Since autoena..."
(file "/usr/local/libexec/rancid/clogin" line 616)
10.17.2.7: missed cmd(s): dir /all slavedisk2:,dir /all sec-slot2:,show
diag,dir /all disk1:,dir /all sec-nvram:,dir /all disk2:,dir /all
sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir
/all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all
slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all
sec-disk0:,dir /all harddiskb:,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir /all sec-slot0:,dir
/all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir
/all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
cbus,dir /all slaveslot1:,show running-config,show c7200,dir /all slot1:
10.17.2.7: missed cmd(s): dir /all slavedisk2:,dir /all sec-slot2:,show
diag,dir /all disk1:,dir /all sec-nvram:,dir /all disk2:,dir /all
sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir
/all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all
slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all
sec-disk0:,dir /all harddiskb:,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir /all sec-slot0:,dir
/all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir
/all slot2:,dir /all harddisk:,dir /all slot0:,dir /all
sup-microcode:,show vlan,dir /all slavebootflash:,show controllers
cbus,dir /all slaveslot1:,show running-config,show c7200,dir /all slot1:
10.17.2.7: End of run not found
10.17.2.7: End of run not found
!Flash: bootflash: Directory of bootflash:/
rancid at lanwan-mon$




rancid at lanwan-mon$ cat 10.17.2.7.new
!RANCID-CONTENT-TYPE: cisco
!
!Chassis type: 7206VXR - a 7200 router
!CPU: NPE400, R7000 CPU at 350Mhz, impl 39, Rev 3.2, 256KB L2, 4096KB L3
Cache
!
!Memory: main 245760K/16384K
!Memory: nvram 125K
!Memory: bootflash 8192K
!Memory: pcmcia ATA slot0 47040K
!
!Processor ID: 23689243
!
!Power: Power supply 1 is Zytek DC Power Supply. Unit is on.
!Power: Power supply 2 is Zytek DC Power Supply. Unit is on.
!
!Image: Software: C7200-P-M, 12.2(3), RELEASE SOFTWARE (fc1)
!Image: Compiled: Wed 18-Jul-01 16:08 by pwade
!Image: disk0:c7200-p-mz.122-3.bin
!
!ROM Bootstrap: Version 12.1(20000710:044039) [nlaw-121E_npeb 117],
DEVELOPMENT SOFTWARE
!BOOTLDR: Version 12.1(7)E, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
!
!
!
!Variable: BOOT variable = disk0:c7200-p-mz.122-3.bin,12;
!Variable: CONFIG_FILE variable does not exist
!Variable: BOOTLDR variable does not exist
!
!Flash: nvram: Directory of nvram:/
!Flash: nvram: 108 -rw- 16776 <no date>
startup-config
!Flash: nvram: 109 ---- 27 <no date>
private-config
!Flash: nvram: 110 -rw- 16776 <no date>
underlying-config
!Flash: nvram: 1 -rw- 20 <no date>
persistent-data
!Flash: nvram: 2 -rw- 0 <no date> ifIndex-table
!Flash: nvram: 129016 bytes total (110113 bytes free)
!
!Flash: bootflash: Directory of bootflash:/
rancid at lanwan-mon$