Mailing List Archive

Have you tried specifying all the cyphertypes your system support? I manually ran the command ssh -vvv <device> and read the (incredibly plentiful) output to find what my system was offering; then, I just specified all of them in .cloginrc. The target system will only accept those cypher it supports, so there's no harm to the SSH protocol to offer as many as you want.

If you're interested in being security conscious, that's a much more involved discussion. I've not researched that - while I'm aware of the discussion around the topic, I'm nonetheless much more concerned (in my current job, anyway) with inter-operability than encryption strength.

weylin

?On 3/7/18, 5:01 PM, "Sebastien.Boulianne@cpu.ca" <Sebastien.Boulianne@cpu.ca> wrote:

Hi guys,

I am curious to know which cypertype do you use to connect to Cisco and Fortinet devices ?
I use aes256-ctr aes256-cbc but I would like to know which others cypertype work.

Thanks for your answer.

Sebastien




_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

Sat, Mar 10, 2018 at 04:52:37AM +0000, Piegorsch, Weylin William:
> Have you tried specifying all the cyphertypes your system support? I manually ran the command ssh -vvv <device> and read the (incredibly plentiful) output to find what my system was offering; then, I just specified all of them in .cloginrc. The target system will only accept those cypher it supports, so there's no harm to the SSH protocol to offer as many as you want.

see ssh -Q

Also, these can be placed these in ~/.ssh/config or /etc/ssh/ssh_config so
that they work outside of rancid too.

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

Thanks sir.

-----Message d'origine-----
De?: heasley [mailto:heas@shrubbery.net]
Envoy??: 10 mars 2018 10:24
??: Piegorsch, Weylin William <weylin@bu.edu>
Cc?: Sebastien Boulianne <Sebastien.Boulianne@cpu.ca>; rancid-discuss@shrubbery.net
Objet?: Re: [rancid] Which cypertype should use to connect to Cisco and Fortinet devices ?

Sat, Mar 10, 2018 at 04:52:37AM +0000, Piegorsch, Weylin William:
> Have you tried specifying all the cyphertypes your system support? I manually ran the command ssh -vvv <device> and read the (incredibly plentiful) output to find what my system was offering; then, I just specified all of them in .cloginrc. The target system will only accept those cypher it supports, so there's no harm to the SSH protocol to offer as many as you want.

see ssh -Q

Also, these can be placed these in ~/.ssh/config or /etc/ssh/ssh_config so that they work outside of rancid too.

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss