Mailing List Archive

Sun, Jan 14, 2018 at 11:34:04PM +0100, Kevin Olbrich:
> Hi!
>
> With WB_16_05_0004 from december, HP switches will enter backup config loop
> because output of "show tech transceivers" now shows the current time:
>
> ;Cmd Info : show tech transceivers
> > ;transceivers
> > ;Transceiver:
> > ; Port # | Type | Prod # | Serial # | Part #
> > ; -------+-----------+------------+------------------+----------
> > ; A1 | SFP+DA1 | J9281B | CN5AFRM134 | 8121-1300
> > ; A2 | SFP+DA1 | J9281B | CN5AFRM0WP | 8121-1300
> > ;show time
> > ;Sun Jan 14 23:20:16 2018
> > ;=== The command has completed successfully. ===
>
>
> How can I fix this in rancid? It would be possible to disable this output
> in "hrancid.in" but this is no solution (HP might add timestamp to all
> outputs).

Would you show me the output of this command, from the prompt with the
command to the following prompt and including the prompts? or the
output of
hrancid -c 'show tech transceivers' hostname

_______________________________________________
Rancid-discuss mailing list
Rancid-discuss@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

*New software:*

Victoria-Switch1# show tech transceivers
Cmd Info : show tech transceivers

transceivers

Transceiver Technical Information:
Port # | Type | Prod # | Serial # | Part #
-------+-----------+------------+------------------+----------


show time
Mon Jan 15 09:52:26 2018


=== The command has completed successfully. ===

Victoria-Switch1#

*Old software:*

Victoria-Switch1# show tech transceivers

transceivers

Transceiver Technical Information:
Port # | Type | Prod # | Serial # | Part #
-------+-----------+------------+------------------+----------




=== The command has completed successfully. ===

Victoria-Switch1#


On 15 January 2018 at 09:22, heasley <heas@shrubbery.net> wrote:

> Sun, Jan 14, 2018 at 11:34:04PM +0100, Kevin Olbrich:
> > Hi!
> >
> > With WB_16_05_0004 from december, HP switches will enter backup config
> loop
> > because output of "show tech transceivers" now shows the current time:
> >
> > ;Cmd Info : show tech transceivers
> > > ;transceivers
> > > ;Transceiver:
> > > ; Port # | Type | Prod # | Serial # | Part #
> > > ; -------+-----------+------------+------------------+----------
> > > ; A1 | SFP+DA1 | J9281B | CN5AFRM134 | 8121-1300
> > > ; A2 | SFP+DA1 | J9281B | CN5AFRM0WP | 8121-1300
> > > ;show time
> > > ;Sun Jan 14 23:20:16 2018
> > > ;=== The command has completed successfully. ===
> >
> >
> > How can I fix this in rancid? It would be possible to disable this output
> > in "hrancid.in" but this is no solution (HP might add timestamp to all
> > outputs).
>
> Would you show me the output of this command, from the prompt with the
> command to the following prompt and including the prompts? or the
> output of
> hrancid -c 'show tech transceivers' hostname
>
> _______________________________________________
> Rancid-discuss mailing list
> Rancid-discuss@shrubbery.net
> http://www.shrubbery.net/mailman/listinfo/rancid-discuss
>