Under OpenSSH 1.2pre17 I can duplicate and Input/Output error for scp:
Conditions:
pc36 is a RH6.0/i386 box.
abc.co.za is a RH5.2/i386 box. (private network)
openssh 1.2 pre 17 on both boxes.
Line between them is a 128k leased line. It works between two 10baseT
machines.
If the scrollbar is active, the scp fails, if it isn't active, scp
works. Note that without the scrollbar, the file gets there and is
valid.
I can try for an strace, but I'd rather not flood the mailing list.
Also, server or client? I've attached scp -v info because its rather
small, but useless.
---cut-here---
[bds@pc36 ssh-rh5]$ ls -la openssl-0.9.4-3.i386.rpm
-rwxr-xr-x 1 root root 653323 Dec 14 11:07 openssl-0.9.4-3.i386.rpm
[bds@pc36 ssh-rh5]$ scp openssl-0.9.4-3.i386.rpm root@abc.co.za:/tmp
root@abc.co.za's password:
openssl-0.9.4-3.i386 30% |******** | 196 KB - stalled -
openssl-0.9.4-3.i386.rpm: Input/output error
[bds@pc36 ssh-rh5]$ Killed by signal 2.
---cut-here---
Note: I had to press Ctrl-C (signal 2).
---cut-here---
[bds@pc36 ssh-rh5]$ scp openssl-0.9.4-3.i386.rpm root@abc.co.za:/tmp -q
root@abc.co.za's password:
[bds@pc36 ssh-rh5]$
---cut-here---
---cut-here---
[bds@pc36 ssh-rh5]$ scp openssl-0.9.4-3.i386.rpm root@abc.co.za:/tmp -q -v
Executing: host abc.co.za, user root, command scp -v -t /tmp
SSH Version OpenSSH-1.2, protocol version 1.5.
Compiled with SSL.
debug: Reading configuration data /etc/ssh/ssh_config
debug: ssh_connect: getuid 513 geteuid 0 anon 0
debug: Connecting to abc.co.za [10.128.1.1] port 22.
debug: Allocated local port 1023.
debug: Connection established.
debug: Remote protocol version 1.5, remote software version OpenSSH-1.2
debug: Waiting for server public key.
debug: Received server public key (768 bits) and host key (1024 bits).
debug: Host 'abc.co.za' is known and matches the host key.
debug: Encryption type: 3des
debug: Sent encrypted session key.
debug: Installing crc compensation attack detector.
debug: Received encrypted confirmation.
debug: Doing password authentication.
root@abc.co.za's password:
debug: Sending command: scp -v -t /tmp
debug: Entering interactive session.
Sending file modes: C0755 653323 openssl-0.9.4-3.i386.rpm
debug: Transferred: stdin 653362, stdout 3, stderr 0 bytes in 66.0 seconds
debug: Bytes per second: stdin 9899.5, stdout 0.0, stderr 0.0
debug: Exit status 0
---cut-here---
The failed verbose looks the same, except the last few lines:
---cut-here---
Sending file modes: C0755 653323 openssl-0.9.4-3.i386.rpm
openssl-0.9.4-3.i386 30% |******** | 196 KB - stalled -
openssl-0.9.4-3.i386.rpm: Input/output error
[bds@pc36 ssh-rh5]$ Killed by signal 2.
debug: Calling cleanup 0x80558f0(0x0)
---cut-here---
--
Kind regards,
Berend
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Berend De Schouwer, +27-11-712-1435, UCS
Conditions:
pc36 is a RH6.0/i386 box.
abc.co.za is a RH5.2/i386 box. (private network)
openssh 1.2 pre 17 on both boxes.
Line between them is a 128k leased line. It works between two 10baseT
machines.
If the scrollbar is active, the scp fails, if it isn't active, scp
works. Note that without the scrollbar, the file gets there and is
valid.
I can try for an strace, but I'd rather not flood the mailing list.
Also, server or client? I've attached scp -v info because its rather
small, but useless.
---cut-here---
[bds@pc36 ssh-rh5]$ ls -la openssl-0.9.4-3.i386.rpm
-rwxr-xr-x 1 root root 653323 Dec 14 11:07 openssl-0.9.4-3.i386.rpm
[bds@pc36 ssh-rh5]$ scp openssl-0.9.4-3.i386.rpm root@abc.co.za:/tmp
root@abc.co.za's password:
openssl-0.9.4-3.i386 30% |******** | 196 KB - stalled -
openssl-0.9.4-3.i386.rpm: Input/output error
[bds@pc36 ssh-rh5]$ Killed by signal 2.
---cut-here---
Note: I had to press Ctrl-C (signal 2).
---cut-here---
[bds@pc36 ssh-rh5]$ scp openssl-0.9.4-3.i386.rpm root@abc.co.za:/tmp -q
root@abc.co.za's password:
[bds@pc36 ssh-rh5]$
---cut-here---
---cut-here---
[bds@pc36 ssh-rh5]$ scp openssl-0.9.4-3.i386.rpm root@abc.co.za:/tmp -q -v
Executing: host abc.co.za, user root, command scp -v -t /tmp
SSH Version OpenSSH-1.2, protocol version 1.5.
Compiled with SSL.
debug: Reading configuration data /etc/ssh/ssh_config
debug: ssh_connect: getuid 513 geteuid 0 anon 0
debug: Connecting to abc.co.za [10.128.1.1] port 22.
debug: Allocated local port 1023.
debug: Connection established.
debug: Remote protocol version 1.5, remote software version OpenSSH-1.2
debug: Waiting for server public key.
debug: Received server public key (768 bits) and host key (1024 bits).
debug: Host 'abc.co.za' is known and matches the host key.
debug: Encryption type: 3des
debug: Sent encrypted session key.
debug: Installing crc compensation attack detector.
debug: Received encrypted confirmation.
debug: Doing password authentication.
root@abc.co.za's password:
debug: Sending command: scp -v -t /tmp
debug: Entering interactive session.
Sending file modes: C0755 653323 openssl-0.9.4-3.i386.rpm
debug: Transferred: stdin 653362, stdout 3, stderr 0 bytes in 66.0 seconds
debug: Bytes per second: stdin 9899.5, stdout 0.0, stderr 0.0
debug: Exit status 0
---cut-here---
The failed verbose looks the same, except the last few lines:
---cut-here---
Sending file modes: C0755 653323 openssl-0.9.4-3.i386.rpm
openssl-0.9.4-3.i386 30% |******** | 196 KB - stalled -
openssl-0.9.4-3.i386.rpm: Input/output error
[bds@pc36 ssh-rh5]$ Killed by signal 2.
debug: Calling cleanup 0x80558f0(0x0)
---cut-here---
--
Kind regards,
Berend
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Berend De Schouwer, +27-11-712-1435, UCS