Mailing List Archive

IPv6
Hi,

I use NetFolow to send traffic data from my Microtik routers to Nprobe
and Ntop. This works as expected for IPv4 but no IPv6 traffic is
recorded. What may cause this?

TIA
Matthias


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Hi Matthias
perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?

Thanks Luca

> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>
> Hi,
>
> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>
> TIA
> Matthias
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Hi Matthias
perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?

Thanks Luca

> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>
> Hi,
>
> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>
> TIA
> Matthias
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Hi Luca,

I will, how to do this? :-)

TIA
Matthias



Von: Luca Deri <deri@ntop.org>
An: <ntop@unipi.it>
Kopie: "ntop@listgateway.unipi.it" <ntop@listgateway.unipi.it>
Gesendet: 05.04.2017 21:24
Betreff: Re: [Ntop] IPv6

Hi Matthias
perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?

Thanks Luca

> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>
> Hi,
>
> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>
> TIA
> Matthias
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany  
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze
Re: IPv6 [ In reply to ]
Hi Luca,

I will, how to do this? :-)

TIA
Matthias



Von: Luca Deri <deri@ntop.org>
An: <ntop@unipi.it>
Kopie: "ntop@listgateway.unipi.it" <ntop@listgateway.unipi.it>
Gesendet: 05.04.2017 21:24
Betreff: Re: [Ntop] IPv6

Hi Matthias
perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?

Thanks Luca

> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>
> Hi,
>
> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>
> TIA
> Matthias
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany  
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze
Re: IPv6 [ In reply to ]
Hi Luca,

generation a pcap is no problem, but what is a "template" in this context?

TIA
Matthias

Am 05.04.2017 um 21:24 schrieb Luca Deri:
> Hi Matthias
> perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?
>
> Thanks Luca
>
>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>
>> Hi,
>>
>> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>>
>> TIA
>> Matthias
>>
>>
>> --
>>
>> MHC SoftWare GmbH
>> Fichtera 17
>> 96274 Itzgrund/Germany
>> voice: +49-(0)9533-92006-0
>> fax: +49-(0)9533-92006-6
>> e-mail: info@mhcsoftware.de
>>
>> HR Coburg: B2242
>> Geschaeftsfuehrer: Matthias Henze
>>
>>
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Hi Matthias
just generate a pcap with wireshark where you filter just flows. Until a template is received, wireshark is unable to decode the traffic, so you can stop *after* wireshark is able to decode the flows as it means that the template has been received

Luca

> On 6 Apr 2017, at 15:53, Matthias Henze <lists@mhcsoftware.de> wrote:
>
> Hi Luca,
>
> generation a pcap is no problem, but what is a "template" in this context?
>
> TIA
> Matthias
>
> Am 05.04.2017 um 21:24 schrieb Luca Deri:
>> Hi Matthias
>> perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?
>>
>> Thanks Luca
>>
>>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>
>>> Hi,
>>>
>>> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>>>
>>> TIA
>>> Matthias
>>>
>>>
>>> --
>>>
>>> MHC SoftWare GmbH
>>> Fichtera 17
>>> 96274 Itzgrund/Germany
>>> voice: +49-(0)9533-92006-0
>>> fax: +49-(0)9533-92006-6
>>> e-mail: info@mhcsoftware.de
>>>
>>> HR Coburg: B2242
>>> Geschaeftsfuehrer: Matthias Henze
>>>
>>>
>>>
>>> _______________________________________________
>>> Ntop mailing list
>>> Ntop@listgateway.unipi.it
>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Hi Matthias
just generate a pcap with wireshark where you filter just flows. Until a template is received, wireshark is unable to decode the traffic, so you can stop *after* wireshark is able to decode the flows as it means that the template has been received

Luca

> On 6 Apr 2017, at 15:53, Matthias Henze <lists@mhcsoftware.de> wrote:
>
> Hi Luca,
>
> generation a pcap is no problem, but what is a "template" in this context?
>
> TIA
> Matthias
>
> Am 05.04.2017 um 21:24 schrieb Luca Deri:
>> Hi Matthias
>> perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?
>>
>> Thanks Luca
>>
>>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>
>>> Hi,
>>>
>>> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>>>
>>> TIA
>>> Matthias
>>>
>>>
>>> --
>>>
>>> MHC SoftWare GmbH
>>> Fichtera 17
>>> 96274 Itzgrund/Germany
>>> voice: +49-(0)9533-92006-0
>>> fax: +49-(0)9533-92006-6
>>> e-mail: info@mhcsoftware.de
>>>
>>> HR Coburg: B2242
>>> Geschaeftsfuehrer: Matthias Henze
>>>
>>>
>>>
>>> _______________________________________________
>>> Ntop mailing list
>>> Ntop@listgateway.unipi.it
>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Hi Luca,

I see this:

root@ntop:/etc/nprobe# nprobe --collector-port=4711
--dump-pkts=/tmp/netflow.pcap
07/Apr/2017 09:09:56 [nprobe.c:3407] Valid nProbe license found
07/Apr/2017 09:09:56 [nprobe.c:4586] Dumping incoming packets on
/tmp/netflow.pcap
07/Apr/2017 09:09:56 [nprobe.c:4872] WARNING: The output interfaceId is
set to 0: did you forget to use -Q perhaps ?
07/Apr/2017 09:09:56 [nprobe.c:4875] WARNING: The input interfaceId is
set to 0: did you forget to use -u perhaps ?
07/Apr/2017 09:09:56 [nprobe.c:4916] -i is ignored as
--collector-port|-3 has been used: using '-i none'
07/Apr/2017 09:09:56 [nprobe.c:4975] Welcome to nProbe v.7.4.170215
($Revision: 5334 $) for x86_64-unknown-linux-gnu with native PF_RING
acceleration
07/Apr/2017 09:09:56 [nprobe.c:4985] Running on Debian GNU/Linux 8.2
(jessie)
07/Apr/2017 09:09:56 [nprobe.c:4996] [LICENSE] nProbe SystemId:
9C3A8E0D00001090
07/Apr/2017 09:09:56 [nprobe.c:5085] WARNING: -n parameter is missing.
127.0.0.1:2055 will be used.
07/Apr/2017 09:09:56 [nprobe.c:7308] Welcome to nProbe v.7.4.170215 for
x86_64-unknown-linux-gnu
07/Apr/2017 09:09:56 [plugin.c:1045] 0 plugin(s) enabled
07/Apr/2017 09:09:56 [nprobe.c:6836] Non IPv4/v6 traffic is discarded
according to the template
07/Apr/2017 09:09:56 [util.c:434] GeoIP: loaded AS config file
/usr/share/ntopng/httpdocs/geoip/GeoIPASNum.dat
07/Apr/2017 09:09:56 [util.c:445] GeoIP: loaded AS IPv6 config file
/usr/share/ntopng/httpdocs/geoip/GeoIPASNumv6.dat
07/Apr/2017 09:09:56 [nprobe.c:5495] Using packet capture length 128
07/Apr/2017 09:09:56 [nprobe.c:7484] IPv6 traffic will NOT be
exported/accounted by this probe
07/Apr/2017 09:09:56 [nprobe.c:7485] due to configuration options (e.g.
use NetFlow v9)
07/Apr/2017 09:09:56 [nprobe.c:7631] Not capturing packet from interface
(collector mode)
07/Apr/2017 09:09:56 [collect.c:147] Flow collector listening on port
4711 (IPv4/v6)
07/Apr/2017 09:09:56 [nprobe.c:7856] nProbe started successfully
07/Apr/2017 09:10:18 [export.c:503] WARNING: Unable to export non-IPv4
flows using NetFlow v5. Dropped.



Most notable:


07/Apr/2017 09:09:56 [nprobe.c:7484] IPv6 traffic will NOT be
exported/accounted by this probe


Any suggestions?

TIA
Matthias


Am 06.04.2017 um 15:56 schrieb Luca Deri:
> Hi Matthias
> just generate a pcap with wireshark where you filter just flows. Until a template is received, wireshark is unable to decode the traffic, so you can stop *after* wireshark is able to decode the flows as it means that the template has been received
>
> Luca
>
>> On 6 Apr 2017, at 15:53, Matthias Henze <lists@mhcsoftware.de> wrote:
>>
>> Hi Luca,
>>
>> generation a pcap is no problem, but what is a "template" in this context?
>>
>> TIA
>> Matthias
>>
>> Am 05.04.2017 um 21:24 schrieb Luca Deri:
>>> Hi Matthias
>>> perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?
>>>
>>> Thanks Luca
>>>
>>>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>>>>
>>>> TIA
>>>> Matthias
>>>>
>>>>
>>>> --
>>>>
>>>> MHC SoftWare GmbH
>>>> Fichtera 17
>>>> 96274 Itzgrund/Germany
>>>> voice: +49-(0)9533-92006-0
>>>> fax: +49-(0)9533-92006-6
>>>> e-mail: info@mhcsoftware.de
>>>>
>>>> HR Coburg: B2242
>>>> Geschaeftsfuehrer: Matthias Henze
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Ntop mailing list
>>>> Ntop@listgateway.unipi.it
>>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>
>>> _______________________________________________
>>> Ntop mailing list
>>> Ntop@listgateway.unipi.it
>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>
>>
>>
>> --
>>
>> MHC SoftWare GmbH
>> Fichtera 17
>> 96274 Itzgrund/Germany
>> voice: +49-(0)9533-92006-0
>> fax: +49-(0)9533-92006-6
>> e-mail: info@mhcsoftware.de
>>
>> HR Coburg: B2242
>> Geschaeftsfuehrer: Matthias Henze
>>
>>
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Now I've tried:

--zmq="tcp://*:5556"
--collector-port=4711
-n=none
-i=none
-V=10

and

-V=9

with the corresponding settings on the Mirkotik without success.


Am 06.04.2017 um 15:56 schrieb Luca Deri:
> Hi Matthias
> just generate a pcap with wireshark where you filter just flows. Until a template is received, wireshark is unable to decode the traffic, so you can stop *after* wireshark is able to decode the flows as it means that the template has been received
>
> Luca
>
>> On 6 Apr 2017, at 15:53, Matthias Henze <lists@mhcsoftware.de> wrote:
>>
>> Hi Luca,
>>
>> generation a pcap is no problem, but what is a "template" in this context?
>>
>> TIA
>> Matthias
>>
>> Am 05.04.2017 um 21:24 schrieb Luca Deri:
>>> Hi Matthias
>>> perhaps the template the Mikrotik is using is not handled properly. Can you please send me (not to the list) a pcap containing template+some IPv6 flows?
>>>
>>> Thanks Luca
>>>
>>>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I use NetFolow to send traffic data from my Microtik routers to Nprobe and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded. What may cause this?
>>>>
>>>> TIA
>>>> Matthias
>>>>
>>>>
>>>> --
>>>>
>>>> MHC SoftWare GmbH
>>>> Fichtera 17
>>>> 96274 Itzgrund/Germany
>>>> voice: +49-(0)9533-92006-0
>>>> fax: +49-(0)9533-92006-6
>>>> e-mail: info@mhcsoftware.de
>>>>
>>>> HR Coburg: B2242
>>>> Geschaeftsfuehrer: Matthias Henze
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Ntop mailing list
>>>> Ntop@listgateway.unipi.it
>>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>
>>> _______________________________________________
>>> Ntop mailing list
>>> Ntop@listgateway.unipi.it
>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>
>>
>>
>> --
>>
>> MHC SoftWare GmbH
>> Fichtera 17
>> 96274 Itzgrund/Germany
>> voice: +49-(0)9533-92006-0
>> fax: +49-(0)9533-92006-6
>> e-mail: info@mhcsoftware.de
>>
>> HR Coburg: B2242
>> Geschaeftsfuehrer: Matthias Henze
>>
>>
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Matthias,

Don't use the option version -V, that will be automatically determined
from the incoming packets.

Also specify -n none to avoid exporting netflow and just use ZMQ.

Regards,
Simone

On Fri, Apr 7, 2017 at 10:13 AM, Matthias Henze <lists@mhcsoftware.de>
wrote:

> Now I've tried:
>
> --zmq="tcp://*:5556"
> --collector-port=4711
> -n=none
> -i=none
> -V=10
>
> and
>
> -V=9
>
> with the corresponding settings on the Mirkotik without success.
>
>
>
> Am 06.04.2017 um 15:56 schrieb Luca Deri:
>
>> Hi Matthias
>> just generate a pcap with wireshark where you filter just flows. Until a
>> template is received, wireshark is unable to decode the traffic, so you can
>> stop *after* wireshark is able to decode the flows as it means that the
>> template has been received
>>
>> Luca
>>
>> On 6 Apr 2017, at 15:53, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>
>>> Hi Luca,
>>>
>>> generation a pcap is no problem, but what is a "template" in this
>>> context?
>>>
>>> TIA
>>> Matthias
>>>
>>> Am 05.04.2017 um 21:24 schrieb Luca Deri:
>>>
>>>> Hi Matthias
>>>> perhaps the template the Mikrotik is using is not handled properly. Can
>>>> you please send me (not to the list) a pcap containing template+some IPv6
>>>> flows?
>>>>
>>>> Thanks Luca
>>>>
>>>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I use NetFolow to send traffic data from my Microtik routers to Nprobe
>>>>> and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded.
>>>>> What may cause this?
>>>>>
>>>>> TIA
>>>>> Matthias
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> MHC SoftWare GmbH
>>>>> Fichtera 17
>>>>> 96274 Itzgrund/Germany
>>>>> voice: +49-(0)9533-92006-0
>>>>> fax: +49-(0)9533-92006-6
>>>>> e-mail: info@mhcsoftware.de
>>>>>
>>>>> HR Coburg: B2242
>>>>> Geschaeftsfuehrer: Matthias Henze
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Ntop mailing list
>>>>> Ntop@listgateway.unipi.it
>>>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>>>
>>>>
>>>> _______________________________________________
>>>> Ntop mailing list
>>>> Ntop@listgateway.unipi.it
>>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>>
>>>>
>>>
>>> --
>>>
>>> MHC SoftWare GmbH
>>> Fichtera 17
>>> 96274 Itzgrund/Germany
>>> voice: +49-(0)9533-92006-0
>>> fax: +49-(0)9533-92006-6
>>> e-mail: info@mhcsoftware.de
>>>
>>> HR Coburg: B2242
>>> Geschaeftsfuehrer: Matthias Henze
>>>
>>>
>>>
>>> _______________________________________________
>>> Ntop mailing list
>>> Ntop@listgateway.unipi.it
>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>
Re: IPv6 [ In reply to ]
Matthias,

Don't use the option version -V, that will be automatically determined
from the incoming packets.

Also specify -n none to avoid exporting netflow and just use ZMQ.

Regards,
Simone

On Fri, Apr 7, 2017 at 10:13 AM, Matthias Henze <lists@mhcsoftware.de>
wrote:

> Now I've tried:
>
> --zmq="tcp://*:5556"
> --collector-port=4711
> -n=none
> -i=none
> -V=10
>
> and
>
> -V=9
>
> with the corresponding settings on the Mirkotik without success.
>
>
>
> Am 06.04.2017 um 15:56 schrieb Luca Deri:
>
>> Hi Matthias
>> just generate a pcap with wireshark where you filter just flows. Until a
>> template is received, wireshark is unable to decode the traffic, so you can
>> stop *after* wireshark is able to decode the flows as it means that the
>> template has been received
>>
>> Luca
>>
>> On 6 Apr 2017, at 15:53, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>
>>> Hi Luca,
>>>
>>> generation a pcap is no problem, but what is a "template" in this
>>> context?
>>>
>>> TIA
>>> Matthias
>>>
>>> Am 05.04.2017 um 21:24 schrieb Luca Deri:
>>>
>>>> Hi Matthias
>>>> perhaps the template the Mikrotik is using is not handled properly. Can
>>>> you please send me (not to the list) a pcap containing template+some IPv6
>>>> flows?
>>>>
>>>> Thanks Luca
>>>>
>>>> On 5 Apr 2017, at 17:25, Matthias Henze <lists@mhcsoftware.de> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I use NetFolow to send traffic data from my Microtik routers to Nprobe
>>>>> and Ntop. This works as expected for IPv4 but no IPv6 traffic is recorded.
>>>>> What may cause this?
>>>>>
>>>>> TIA
>>>>> Matthias
>>>>>
>>>>>
>>>>> --
>>>>>
>>>>> MHC SoftWare GmbH
>>>>> Fichtera 17
>>>>> 96274 Itzgrund/Germany
>>>>> voice: +49-(0)9533-92006-0
>>>>> fax: +49-(0)9533-92006-6
>>>>> e-mail: info@mhcsoftware.de
>>>>>
>>>>> HR Coburg: B2242
>>>>> Geschaeftsfuehrer: Matthias Henze
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Ntop mailing list
>>>>> Ntop@listgateway.unipi.it
>>>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>>>
>>>>
>>>> _______________________________________________
>>>> Ntop mailing list
>>>> Ntop@listgateway.unipi.it
>>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>>
>>>>
>>>
>>> --
>>>
>>> MHC SoftWare GmbH
>>> Fichtera 17
>>> 96274 Itzgrund/Germany
>>> voice: +49-(0)9533-92006-0
>>> fax: +49-(0)9533-92006-6
>>> e-mail: info@mhcsoftware.de
>>>
>>> HR Coburg: B2242
>>> Geschaeftsfuehrer: Matthias Henze
>>>
>>>
>>>
>>> _______________________________________________
>>> Ntop mailing list
>>> Ntop@listgateway.unipi.it
>>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>>
>>
>> _______________________________________________
>> Ntop mailing list
>> Ntop@listgateway.unipi.it
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>
Re: IPv6 [ In reply to ]
Hi Simone,

Am 07.04.2017 um 17:03 schrieb Simone Mainardi:
> Matthias,
>
> Don't use the option version -V, that will be automatically determined
> from the incoming packets.

I used it without -V bevore, this makes no difference.

>
> Also specify -n none to avoid exporting netflow and just use ZMQ.

I've specified -n, see my previous mails ...

> Now I've tried:
>
> --zmq="tcp://*:5556"
> --collector-port=4711
> -n=none
> -i=none
> -V=10

TIA
Matthias


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Recently I see many flows with "NoIP". According to the ports and
frequency this may be IPv6 entries. But why are they listed as "NoIP"?

The database table for IPv6 is still empty.


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
Re: IPv6 [ In reply to ]
Matthias, I guess you've also asked help here and the issue is fixed:
https://github.com/ntop/nProbe/issues/169#issuecomment-293005183

If not, please feel free to continue with the thread.

On Mon, Apr 10, 2017 at 9:20 AM, Matthias Henze <lists@mhcsoftware.de>
wrote:

> Recently I see many flows with "NoIP". According to the ports and
> frequency this may be IPv6 entries. But why are they listed as "NoIP"?
>
> The database table for IPv6 is still empty.
>
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>
Re: IPv6 [ In reply to ]
Matthias, I guess you've also asked help here and the issue is fixed:
https://github.com/ntop/nProbe/issues/169#issuecomment-293005183

If not, please feel free to continue with the thread.

On Mon, Apr 10, 2017 at 9:20 AM, Matthias Henze <lists@mhcsoftware.de>
wrote:

> Recently I see many flows with "NoIP". According to the ports and
> frequency this may be IPv6 entries. But why are they listed as "NoIP"?
>
> The database table for IPv6 is still empty.
>
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0
> fax: +49-(0)9533-92006-6
> e-mail: info@mhcsoftware.de
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>
Re: IPv6 [ In reply to ]
Yes, thanks, having 2 communication channels is no good idea ... IMHO.

Am 10.04.2017 um 22:52 schrieb Simone Mainardi:
> Matthias, I guess you've also asked help here and the issue is
> fixed: https://github.com/ntop/nProbe/issues/169#issuecomment-293005183
>
> If not, please feel free to continue with the thread.
>
> On Mon, Apr 10, 2017 at 9:20 AM, Matthias Henze <lists@mhcsoftware.de
> <mailto:lists@mhcsoftware.de>> wrote:
>
> Recently I see many flows with "NoIP". According to the ports and
> frequency this may be IPv6 entries. But why are they listed as "NoIP"?
>
> The database table for IPv6 is still empty.
>
>
>
> --
>
> MHC SoftWare GmbH
> Fichtera 17
> 96274 Itzgrund/Germany
> voice: +49-(0)9533-92006-0 <tel:%2B49-%280%299533-92006-0>
> fax: +49-(0)9533-92006-6 <tel:%2B49-%280%299533-92006-6>
> e-mail: info@mhcsoftware.de <mailto:info@mhcsoftware.de>
>
> HR Coburg: B2242
> Geschaeftsfuehrer: Matthias Henze
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it <mailto:Ntop@listgateway.unipi.it>
> http://listgateway.unipi.it/mailman/listinfo/ntop
> <http://listgateway.unipi.it/mailman/listinfo/ntop>
>
>
>
>
> _______________________________________________
> Ntop mailing list
> Ntop@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop
>


--

MHC SoftWare GmbH
Fichtera 17
96274 Itzgrund/Germany

voice: +49-(0)9533-92006-0
fax: +49-(0)9533-92006-6
e-mail: info@mhcsoftware.de

HR Coburg: B2242
Geschaeftsfuehrer: Matthias Henze



_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop