Hi Alfredo!
Update: reboot helps only if I have added i40e & pf_ring
to /etc/modprobe.d/blacklist.conf before rebooting.
Server info: CentOS release 6.8 (Final) 2.6.32-642.13.1.el6.x86_64
This is my dmesg log:
[PF_RING] Welcome to PF_RING 6.5.0 ($Revision:
dev:aa7106b130103ee434e5777e14af39f2a68e333f$)
(C) 2004-16 ntop.org
[PF_RING] registered /proc/net/pf_ring/
NET: Registered protocol family 27
[PF_RING] Min # ring slots 4096
[PF_RING] Slot version 16
[PF_RING] Capture TX Yes [RX+TX]
[PF_RING] IP Defragment No
[PF_RING] Initialized correctly
...
i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version
1.5.18
i40e: Copyright(c) 2013 - 2016 Intel Corporation.
i40e 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
i40e 0000:02:00.0: setting latency timer to 64
i40e 0000:02:00.0: fw 5.0.40043 api 1.5 nvm 5.02 0x800023b6 1.1313.0
i40e 0000:02:00.0: MAC address: 0c:c4:7a:19:73:3a
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
i40e 0000:02:00.0: irq 88 for MSI/MSI-X
...
udev: renamed network interface eth0 to eth10
[PF_RING-ZC] i40e_up_complete: attach eth10 [pf start=4177526784
len=8388608][cache_line_size=128][MSIX enabled]
ADDRCONF(NETDEV_UP): eth10: link is not ready
8021q: adding VLAN 0 to HW filter on device eth10
i40e 0000:02:00.0: eth10: adding 0c:c4:7a:19:73:3a vid=0
i40e 0000:02:00.0: eth10: NIC Link is Up 40 Gbps Full Duplex, Flow Control:
None
ADDRCONF(NETDEV_CHANGE): eth10: link becomes ready
i40e 0000:02:00.0: PCI-Express: Speed 8.0GT/s Width x8
i40e 0000:02:00.0: Features: PF-id[0] VFs: 128 VSIs: 130 QP: 24 RSS FD_ATR
FD_SB NTUPLE CloudF VxLAN PTP VEPA
...
device eth10 entered promiscuous mode
[PF_RING-ZC] i40e_down: detach eth10
*[PF_RING] pfring_get_zc_dev:5991 eth10@0 mapping failed or not a ZC device*
[PF_RING-ZC] i40e_up_complete: attach eth10 [pf start=4160749568
len=8388608][cache_line_size=128][MSIX enabled]
2017-02-07 15:18 GMT+03:00 Alfredo Cardigliano <cardigliano@ntop.org>:
> Hi Serge
> do you see any error in dmesg?
> What is the pf_ring and i40e version you are using?
>
> Alfredo
>
> On 7 Feb 2017, at 12:55, ?????? ?????????? <bashlykevich@gmail.com> wrote:
>
> Hi!
>
> Sometimes we are getting problem with zbalance_ipc - it suddenly starts to
> drop Recvd packets.
> There are the latest version of i40e driver & pf_ring & userland utils
> installed from sources.
> Server reboot helps to discard the problem, reinstall of drivers&modules
> doesn't.
> In log it looks like:
> *[zbalance_ipc.c:286] Actual Stats: Recv 0.00 pps (1'291'655.87 drops) -
> Forwarded 0.00 pps (0.00 drops).*
>
> What's the reason for this drops?
>
> Thanks!
>
> Best regards,
> Serge Bash.
> _______________________________________________
> Ntop-misc mailing list
> Ntop-misc@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>
>
>
> _______________________________________________
> Ntop-misc mailing list
> Ntop-misc@listgateway.unipi.it
> http://listgateway.unipi.it/mailman/listinfo/ntop-misc
>