Hello,
I have a filter setup :
term DDOS {
from {
destination-prefix-list {
DDOS-Customers;
}
}
then {
count DDOS;
next-ip 192.168.126.2/32;
}
}
The 192.168.126.2 IP is the DDOS mitigation device. Is there a way I can setup the router to ping the 192.168.126.2 address, set a ?reachable variable? and then use that variable in the filter. So if the device goes down the filter term is bypassed and traffic flows to the customer bypassing the DDOS mitigation machine.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
I have a filter setup :
term DDOS {
from {
destination-prefix-list {
DDOS-Customers;
}
}
then {
count DDOS;
next-ip 192.168.126.2/32;
}
}
The 192.168.126.2 IP is the DDOS mitigation device. Is there a way I can setup the router to ping the 192.168.126.2 address, set a ?reachable variable? and then use that variable in the filter. So if the device goes down the filter term is bypassed and traffic flows to the customer bypassing the DDOS mitigation machine.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp