Mailing List Archive

IQ ChSTM-1 channel capacity
Hi ... it's me again with the same question but now under 6.2.. apparently
there was an improvement on the number of channels on 6.0 was increased to
336 but i can't find documentation on it.. Does anybody has any real
experience with this PIC and its capacity.. thanks

Daniel

--
IQ ChSTM-1 channel capacity [ In reply to ]
I believe the Q-PIC can have 768 channels.

Nic

-----Original Message-----
From: juniper-nsp-bounces@puck.nether.net
[mailto:juniper-nsp-bounces@puck.nether.net]On Behalf Of
telecom@servidor.unam.mx
Sent: 18 February 2004 20:27
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] IQ ChSTM-1 channel capacity



Hi ... it's me again with the same question but now under 6.2.. apparently
there was an improvement on the number of channels on 6.0 was increased to
336 but i can't find documentation on it.. Does anybody has any real
experience with this PIC and its capacity.. thanks

Daniel

--

_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp
IQ ChSTM-1 channel capacity [ In reply to ]
On Thu, 19 Feb 2004, Nic McCartney wrote:

Thanks Nic, so is this something you have tested on JunOS 6.2? i've seen
previous documentation where the number was much lower so i just wanted to
get some url where this can be confirmed since 6.2 documents dont seem to
have a clear indication ...
Just need to confirm so we can get the exact number of PICs.. either one
or two.. small installation.. :)

> I believe the Q-PIC can have 768 channels.
>
> Nic
>
> -----Original Message-----
> From: juniper-nsp-bounces@puck.nether.net
> [mailto:juniper-nsp-bounces@puck.nether.net]On Behalf Of
> telecom@servidor.unam.mx
> Sent: 18 February 2004 20:27
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] IQ ChSTM-1 channel capacity
>
>
>
> Hi ... it's me again with the same question but now under 6.2.. apparently
> there was an improvement on the number of channels on 6.0 was increased to
> 336 but i can't find documentation on it.. Does anybody has any real
> experience with this PIC and its capacity.. thanks
>
> Daniel
>
>

--
IQ ChSTM-1 channel capacity [ In reply to ]
Not sure if it was tested with 6.2. Some colleagues of mine did do some
testing however I don't know if they went upto the limit of 768. I was told
by Juniper recently that Q-PIC capacity was 768 channels.
Can one of the Juniper folk on this list confirm?


Nic

-----Original Message-----
From: telecom@servidor.unam.mx [mailto:telecom@servidor.unam.mx]
Sent: 20 February 2004 01:18
To: Nic McCartney
Cc: juniper-nsp@puck.nether.net
Subject: RE: [j-nsp] IQ ChSTM-1 channel capacity


On Thu, 19 Feb 2004, Nic McCartney wrote:

Thanks Nic, so is this something you have tested on JunOS 6.2? i've seen
previous documentation where the number was much lower so i just wanted to
get some url where this can be confirmed since 6.2 documents dont seem to
have a clear indication ...
Just need to confirm so we can get the exact number of PICs.. either one
or two.. small installation.. :)

> I believe the Q-PIC can have 768 channels.
>
> Nic
>
> -----Original Message-----
> From: juniper-nsp-bounces@puck.nether.net
> [mailto:juniper-nsp-bounces@puck.nether.net]On Behalf Of
> telecom@servidor.unam.mx
> Sent: 18 February 2004 20:27
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] IQ ChSTM-1 channel capacity
>
>
>
> Hi ... it's me again with the same question but now under 6.2.. apparently
> there was an improvement on the number of channels on 6.0 was increased to
> 336 but i can't find documentation on it.. Does anybody has any real
> experience with this PIC and its capacity.. thanks
>
> Daniel
>
>

--