Hi folks,
I have a network that I would like to deploy MPLS in. If I had the
money I would put M5s or M7s in everywhere, but I don't so I need
something cheaper - I will put a single M5 or M7 regionally and
at each POP put in something from another vendor. I only really
need ethernet interfaces everywhere so I am looking at a Cisco
2948 or a Riverstone RS80, what have other people used? I currently
use Enterasys XP2400s everywhere but they have no plans to support
MPLS on them.
All the best,
John.
--
John Senior <js@irishbroadband.ie>
> -----Original Message-----
> From: Rolo Tomassi [mailto:rolotomassi32@hotmail.com]
> Sent: 04 December 2003 15:00
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] a few basic mpls questions
>
>
> Hi all,
>
> 1) Assuming I had created a single LSP from Routers A to C,
> if I sent a ping
> from A - C due to the unidirectional state of the lsp, the return icmp
> traffic from C-A would use the IGP ?
>
> 2) I have 2 bi-directional lsps to the same destination, if
> I'm runnig cspf,
> what metric adjustment would I need to make to prefer one
> path over another.
> I'm assuming I would adjust the LSP metric and not the IGP ?
>
> Thanks in advance.
>
> Rolo !
>
> _________________________________________________________________
> Express yourself with cool emoticons - download MSN Messenger today!
> http://www.msn.co.uk/messenger
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>
I have a network that I would like to deploy MPLS in. If I had the
money I would put M5s or M7s in everywhere, but I don't so I need
something cheaper - I will put a single M5 or M7 regionally and
at each POP put in something from another vendor. I only really
need ethernet interfaces everywhere so I am looking at a Cisco
2948 or a Riverstone RS80, what have other people used? I currently
use Enterasys XP2400s everywhere but they have no plans to support
MPLS on them.
All the best,
John.
--
John Senior <js@irishbroadband.ie>
> -----Original Message-----
> From: Rolo Tomassi [mailto:rolotomassi32@hotmail.com]
> Sent: 04 December 2003 15:00
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] a few basic mpls questions
>
>
> Hi all,
>
> 1) Assuming I had created a single LSP from Routers A to C,
> if I sent a ping
> from A - C due to the unidirectional state of the lsp, the return icmp
> traffic from C-A would use the IGP ?
>
> 2) I have 2 bi-directional lsps to the same destination, if
> I'm runnig cspf,
> what metric adjustment would I need to make to prefer one
> path over another.
> I'm assuming I would adjust the LSP metric and not the IGP ?
>
> Thanks in advance.
>
> Rolo !
>
> _________________________________________________________________
> Express yourself with cool emoticons - download MSN Messenger today!
> http://www.msn.co.uk/messenger
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>