Hi everybody,
What are the difference in the following configs:
1. [edit routing-options forwarding-table]
unicast-reverse-path feasible-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check;
}
}
2. [edit routing-options forwarding-table]
unicast-reverse-path active-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check;
}
}
3. [edit routing-options forwarding-table]
unicast-reverse-path feasible-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check; {
mode loose;
}
}
}
4. [edit routing-options forwarding-table]
unicast-reverse-path active-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check; {
mode loose;
}
}
}
Which of these is for a loose-mode rpf in a border router deployment?
I've searched through the archive but cannot find the info.
thanks in advance,
best regards,
sonny
What are the difference in the following configs:
1. [edit routing-options forwarding-table]
unicast-reverse-path feasible-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check;
}
}
2. [edit routing-options forwarding-table]
unicast-reverse-path active-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check;
}
}
3. [edit routing-options forwarding-table]
unicast-reverse-path feasible-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check; {
mode loose;
}
}
}
4. [edit routing-options forwarding-table]
unicast-reverse-path active-paths;
and
[edit interfaces fe-0/0/0]
unit 0 {
family inet {
rpf-check; {
mode loose;
}
}
}
Which of these is for a loose-mode rpf in a border router deployment?
I've searched through the archive but cannot find the info.
thanks in advance,
best regards,
sonny