Hi,
This has been discussed many times here. Apologize if someone think this is
too simple. But only now I give it a try and without luck.
I have setup this in the test lab:
/-- IBGP -- router A -- EBGP --\
router C < > router D
\-- IBGP -- router B -- EBGP --/
I believe there are equal cost paths but the router C doesn't seem to be
able the load balance per packet.
Below is a snapshot from router C:
192.168.44.0/22 *[BGP/170] 19:07:50, MED 90, localpref 350, from
192.168.9.2
AS path: 64665 64665 I
to 192.168.4.1 via ge-0/1/0.0
> to 192.168.4.2 via ge-0/1/0.0
192.168.48.0/22 *[BGP/170] 19:07:50, MED 90, localpref 350, from
192.168.9.2
AS path: 64665 64665 I
> to 192.168.4.1 via ge-0/1/0.0
to 192.168.4.2 via ge-0/1/0.0
router C# show policy-options policy-statement load-balancing-policy
from as-path TEST-AS;
then {
load-balance per-packet;
}
router C# show policy-options as-path TEST-AS
"64665 .*";
router C# show routing-options forwarding-table
export load-balancing-policy;
I have even configured "multipath" at BGP but doesn't help still.
I wonder how do I verify whether the per packet load balancing is being
enabled other than traceroute.
Thanks!
Jonathan.
This has been discussed many times here. Apologize if someone think this is
too simple. But only now I give it a try and without luck.
I have setup this in the test lab:
/-- IBGP -- router A -- EBGP --\
router C < > router D
\-- IBGP -- router B -- EBGP --/
I believe there are equal cost paths but the router C doesn't seem to be
able the load balance per packet.
Below is a snapshot from router C:
192.168.44.0/22 *[BGP/170] 19:07:50, MED 90, localpref 350, from
192.168.9.2
AS path: 64665 64665 I
to 192.168.4.1 via ge-0/1/0.0
> to 192.168.4.2 via ge-0/1/0.0
192.168.48.0/22 *[BGP/170] 19:07:50, MED 90, localpref 350, from
192.168.9.2
AS path: 64665 64665 I
> to 192.168.4.1 via ge-0/1/0.0
to 192.168.4.2 via ge-0/1/0.0
router C# show policy-options policy-statement load-balancing-policy
from as-path TEST-AS;
then {
load-balance per-packet;
}
router C# show policy-options as-path TEST-AS
"64665 .*";
router C# show routing-options forwarding-table
export load-balancing-policy;
I have even configured "multipath" at BGP but doesn't help still.
I wonder how do I verify whether the per packet load balancing is being
enabled other than traceroute.
Thanks!
Jonathan.