A while ago, I asked SE if it is possible to get Root Shell on FastIron
for diagnosis.
The answer was, that there is no possibility to connect low level.
Finally, I found out that this is not true and there is a possibility:
- Direct serial connection required
- If this is a non-master stacked unit: dm mport-enable to enable the
management LAN port
- go to OS mode with Ctrl+Y+M and Enter
- Now IP address can be set:
OS>remote address 172.20.1.10 255.255.255.0
- Gateway if needed:
OS>remote def 172.20.1.1
- Start telnet server:
OS>telnetd start
- Now you can connect via telnet to (additional and special) IP address
configured above. No authentication is taking place, root access.
Best regards,
Franz Georg Köhler
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
for diagnosis.
The answer was, that there is no possibility to connect low level.
Finally, I found out that this is not true and there is a possibility:
- Direct serial connection required
- If this is a non-master stacked unit: dm mport-enable to enable the
management LAN port
- go to OS mode with Ctrl+Y+M and Enter
- Now IP address can be set:
OS>remote address 172.20.1.10 255.255.255.0
- Gateway if needed:
OS>remote def 172.20.1.1
- Start telnet server:
OS>telnetd start
- Now you can connect via telnet to (additional and special) IP address
configured above. No authentication is taking place, root access.
Best regards,
Franz Georg Köhler
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp