Hi
Just move firmware file to upper directory, like to fcx_last
Valeri Streltsov
TiERA Broadband
From: foundry-nsp [mailto:foundry-nsp-bounces@puck.nether.net] On Behalf Of
Youssef Bengelloun-Zahr
Sent: Monday, October 7, 2013 12:01 PM
To: Brian Loveland
Cc: Niels Bakker; foundry-nsp@puck.nether.net
Subject: Re: [f-nsp] Lost Password FCX stack switchs
Hello,
Follow up : Using another computer, I was able to enter boot monitor mode
and perform password recovery procedure.
Now, new problem when I try to upgrade software version from FCXS07300f to
FCXS07400b, I keep on hitting this message :
telnet@ag01-ams01#copy tftp flash 10.101.1.1
fcx_last/740b/Images/FCXS07400b.bin primary
File name is too big
Any ideas ?
Y.
2013/10/6 Youssef Bengelloun-Zahr <youssef@720.fr <mailto:youssef@720.fr> >
On both units forming the stack, very slow.
Y.
Le 6 oct. 2013 à 19:55, Brian Loveland <brian@aereo.com
<mailto:brian@aereo.com> > a écrit :
Are you seeing slow console on both units or just one?
We have lots of ICX6610 stack's deployed, if you are trying to console to
the unit that is not the master, the console will be very slow as its remote
console into the master.
But the bootup console is directly on each unit (before the stack is setup)
so perhaps thats not the issue.
On Sun, Oct 6, 2013 at 1:14 PM, Youssef Bengelloun-Zahr <youssef@720.fr
<mailto:youssef@720.fr> > wrote:
Hello Niels,
Again, console port is really responding very slowly.
For some kind of reason I can't explain, it won't let me enter boot monitor
mode even when keep on hiting 'b' stroke. Very weird shit !?!
I guess I'll try with a different computer + serial cable tomorrow.
Y.
Le 6 oct. 2013 à 18:47, Niels Bakker <niels=foundry-nsp@bakker.net
<mailto:foundry-nsp@bakker.net> > a écrit :
> * youssef@720.fr <mailto:youssef@720.fr> (Youssef Bengelloun-Zahr) [Sun
06 Oct 2013, 12:58 CEST]:
>> When I tried to log in again, I was prompted for a login/password. I
didn't configure any before rebooting.
>
> You may have configured a different AAA model, which, if you omit users,
will lead to lockout.
>
>
>> All usual dumb passwords don't work, and I can't enter the boot monitor
mode when I reload the stack !?! So, classic lost password recovery
procedure isn't helpfull here.
>
> What do you mean with "can't"? Just send 'b' over the serial console
several times directly after a powercycle, and follow the rest of the
instructions in the FastIron Config Guide ("no password" and so on).
>
>
> -- Niels.
>
> --
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net <mailto:foundry-nsp@puck.nether.net>
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net <mailto:foundry-nsp@puck.nether.net>
http://puck.nether.net/mailman/listinfo/foundry-nsp --
Youssef BENGELLOUN-ZAHR