Hi,
I have 2 ServerIronXL in Hot Standby SLB mode, this work fine, but i
detected lost packet (ping) to the ServerIron-backup's management IP
address. I don?t see this lost to the ServerIron-Active.
Each Serveriron is connected to two switches Cisco 3560 (2 Uplink) and
between these Cisco switches there is a connection too, STP is blocking the
L2 loop on a 3560.
3560---------3560
| \____---/ |
SI-------/ \-------SI(backup)
I checked the all links, if I shutdown an Uplink on the serveriron-backup I
don?t see lost packet.
Can anybody help me ?
regard,
Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20051226/6a9d093e/attachment.html
I have 2 ServerIronXL in Hot Standby SLB mode, this work fine, but i
detected lost packet (ping) to the ServerIron-backup's management IP
address. I don?t see this lost to the ServerIron-Active.
Each Serveriron is connected to two switches Cisco 3560 (2 Uplink) and
between these Cisco switches there is a connection too, STP is blocking the
L2 loop on a 3560.
3560---------3560
| \____---/ |
SI-------/ \-------SI(backup)
I checked the all links, if I shutdown an Uplink on the serveriron-backup I
don?t see lost packet.
Can anybody help me ?
regard,
Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20051226/6a9d093e/attachment.html