Mailing List Archive

Question regarding my wishlist
Hello Colleagues,

I'm going to buy a foundr bigiron 4000 that is going to be used as a router
for up to 200 megabits of traffic (about 25k pps) using bgp4. I need two
gigabit-uplink-ports.

My current wishlist can be found below. I'd appreciate your feedback.. Are
there any drawbacks regarding my choice of modules?

B4000 with dual-AC
J-FxGMR4 with 256 MB of Ram and 4 mini-gbics
Fi3L3UR-PROM upgrade.

Does anyone know if I can get future software upgrades without a support
contract?
The chassi is brand new. So I should be able to get a support contract,
right.. If so? who's the best reseller?

Thanks,
Gunther
Question regarding my wishlist [ In reply to ]
On Thu, Dec 23, 2004 at 10:23:14PM +0100, Gunther Stammwitz wrote:

> I'm going to buy a foundr bigiron 4000 that is going to be used as a router
> for up to 200 megabits of traffic (about 25k pps) using bgp4. I need two
> gigabit-uplink-ports.
>
> My current wishlist can be found below. I'd appreciate your feedback.. Are
> there any drawbacks regarding my choice of modules?
>
> B4000 with dual-AC
> J-FxGMR4 with 256 MB of Ram and 4 mini-gbics
> Fi3L3UR-PROM upgrade.

> Does anyone know if I can get future software upgrades without a support
> contract?

If you are brave enough you could run HP's software images on your
Foundry Equipment. These are BigIron images so I don't know if they have
the same functionality as a FastIron (as your modules are all FastIron
modules)

--
Cliff Albert <cliff@oisec.net>
Question regarding my wishlist [ In reply to ]
It sounds like you just want Bronze support which I don't think is too
expensive. You get Warranty software upgrade access for one year I
believe. (Using your serial number as login and password):
http://www.foundrynet.com/services/servicePrograms/bronze.html

You probably want:

1 x BI4000 Chassis
1 x RPS3 90-220VAC Power Supply for BigIron 4000 & BigIron 8000
1 x J-BxGMR4 8-port mini-GBIC based Gigabit management module
4 x E1MG-SX 1000Base-SX mini-GBIC optic, MMF, LC connector

-----Original Message-----
From: foundry-nsp-bounces@puck.nether.net
[mailto:foundry-nsp-bounces@puck.nether.net] On Behalf Of Gunther
Stammwitz
Sent: Thursday, December 23, 2004 1:23 PM
To: foundry-nsp@puck.nether.net
Subject: [f-nsp] Question regarding my wishlist

Hello Colleagues,

I'm going to buy a foundr bigiron 4000 that is going to be used as a
router for up to 200 megabits of traffic (about 25k pps) using bgp4. I
need two gigabit-uplink-ports.

My current wishlist can be found below. I'd appreciate your feedback..
Are there any drawbacks regarding my choice of modules?

B4000 with dual-AC
J-FxGMR4 with 256 MB of Ram and 4 mini-gbics Fi3L3UR-PROM upgrade.

Does anyone know if I can get future software upgrades without a support
contract?
The chassi is brand new. So I should be able to get a support contract,
right.. If so? who's the best reseller?

Thanks,
Gunther

_______________________________________________
foundry-nsp mailing list
foundry-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
Question regarding my wishlist [ In reply to ]
Cliff's right, you need BigIron. FastIron will NOT run BGP, with or
without the L3 upgrade.

Mike

On Mon, 27 Dec 2004 09:53:04 -0800, Cliff Fogle <Cliff@ofoto.com> wrote:
> It sounds like you just want Bronze support which I don't think is too
> expensive. You get Warranty software upgrade access for one year I
> believe. (Using your serial number as login and password):
> http://www.foundrynet.com/services/servicePrograms/bronze.html
>
> You probably want:
>
> 1 x BI4000 Chassis
> 1 x RPS3 90-220VAC Power Supply for BigIron 4000 & BigIron 8000
> 1 x J-BxGMR4 8-port mini-GBIC based Gigabit management module
> 4 x E1MG-SX 1000Base-SX mini-GBIC optic, MMF, LC connector
>
> -----Original Message-----
> From: foundry-nsp-bounces@puck.nether.net
> [mailto:foundry-nsp-bounces@puck.nether.net] On Behalf Of Gunther
> Stammwitz
> Sent: Thursday, December 23, 2004 1:23 PM
> To: foundry-nsp@puck.nether.net
> Subject: [f-nsp] Question regarding my wishlist
>
> Hello Colleagues,
>
> I'm going to buy a foundr bigiron 4000 that is going to be used as a
> router for up to 200 megabits of traffic (about 25k pps) using bgp4. I
> need two gigabit-uplink-ports.
>
> My current wishlist can be found below. I'd appreciate your feedback..
> Are there any drawbacks regarding my choice of modules?
>
> B4000 with dual-AC
> J-FxGMR4 with 256 MB of Ram and 4 mini-gbics Fi3L3UR-PROM upgrade.
>
> Does anyone know if I can get future software upgrades without a support
> contract?
> The chassi is brand new. So I should be able to get a support contract,
> right.. If so? who's the best reseller?
>
> Thanks,
> Gunther
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>