Mailing List Archive: Term sessions...and an introduction.

Term sessions...and an introduction.

Sep 22, 2004, 1:13 AM

Post #1 of 3 (1256 views)

So I found a work around for the serveriron XL series not accepting
pasted commands to the CLI and possibly even halting on doing so.

See the solution here:
http://www.shoint.org/foundrytwiki/bin/view/Foundry/CutAndPasteFix

And with that I would like to introduce a very incomplete Twiki for
Foundry Devices:

http://www.shoint.org

You all are the beta testers...email me at shoint@ajax2440.org with any
suggestions and please feel free to add or modify any topic in the
Foundry web. I just received an IronPoint and so hopefully will have
some useful configuration references for that.

(And yes...it is served off of a pentium 2 compaq mini desktop in my
loft.)

-----Original Message-----
From: Matt Stockdale [mailto:mstockda@logicworks.net]
Sent: Wednesday, August 04, 2004 1:18 PM
To: Cliff Fogle
Cc: foundry-nsp@puck.nether.net
Subject: Re: [f-nsp] Term sessions...

I have the same issues, although I can and do cut and paste without
problem. I haven't found a workaround, but then, I haven't really
looked.

On Mon, 2004-08-02 at 21:45, Cliff Fogle wrote:
> Anyone else have trouble with terminal/ssh/telnet sessions on foundry
> devices? Coming from Linux I can't get my backspace and delete keys
> to work for the life of me, which sticks me with ctrl-H for delete.
> If I use 'screen' it's fixed...still though.
>
> And I can't cut and paste into a serverIron from any session, it
> always takes 1 or 2 lines then just craps out on the rest.
>
> This across many different code versions and platforms including
> ServerIron, FastIron and NetIron.
>
> The EdgeIron's work fine for some reason...
>
> ______________________________________________________________________
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp

Term sessions...and an introduction. [ In reply to ]

steve at telecomplete

Sep 22, 2004, 9:44 AM

Post #2 of 3 (1220 views)

Permalink

i've seen this on other switches as well.. is there a bug open for this with
foundry .. or is it fixed in any code?

On Tue, 21 Sep 2004, Cliff Fogle wrote:

> So I found a work around for the serveriron XL series not accepting
> pasted commands to the CLI and possibly even halting on doing so.
>
> See the solution here:
> http://www.shoint.org/foundrytwiki/bin/view/Foundry/CutAndPasteFix
>
> And with that I would like to introduce a very incomplete Twiki for
> Foundry Devices:
>
> http://www.shoint.org
>
> You all are the beta testers...email me at shoint@ajax2440.org with any
> suggestions and please feel free to add or modify any topic in the
> Foundry web. I just received an IronPoint and so hopefully will have
> some useful configuration references for that.
>
> (And yes...it is served off of a pentium 2 compaq mini desktop in my
> loft.)
>
> -----Original Message-----
> From: Matt Stockdale [mailto:mstockda@logicworks.net]
> Sent: Wednesday, August 04, 2004 1:18 PM
> To: Cliff Fogle
> Cc: foundry-nsp@puck.nether.net
> Subject: Re: [f-nsp] Term sessions...
>
> I have the same issues, although I can and do cut and paste without
> problem. I haven't found a workaround, but then, I haven't really
> looked.
>
> On Mon, 2004-08-02 at 21:45, Cliff Fogle wrote:
> > Anyone else have trouble with terminal/ssh/telnet sessions on foundry
> > devices? Coming from Linux I can't get my backspace and delete keys
> > to work for the life of me, which sticks me with ctrl-H for delete.
> > If I use 'screen' it's fixed...still though.
> >
> > And I can't cut and paste into a serverIron from any session, it
> > always takes 1 or 2 lines then just craps out on the rest.
> >
> > This across many different code versions and platforms including
> > ServerIron, FastIron and NetIron.
> >
> > The EdgeIron's work fine for some reason...
> >
> > ______________________________________________________________________
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp@puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>

Term sessions...and an introduction. [ In reply to ]

Cliff at ofoto

Sep 22, 2004, 10:35 AM

Post #3 of 3 (1225 views)

Permalink

I have so far only seen it in the ServerIron XL series. But I've only
used FastIron 1500/800, EdgeIron 24G-A and NetIron 400 besides. The
ServerIron's are also where I do most of my cut and pasting.

I've mentioned it to my SE but only when I had bigger issues...

-----Original Message-----
From: Stephen J. Wilcox [mailto:steve@telecomplete.co.uk]
Sent: Wednesday, September 22, 2004 6:44 AM
To: Cliff Fogle
Cc: foundry-nsp@puck.nether.net
Subject: RE: [f-nsp] Term sessions...and an introduction.

i've seen this on other switches as well.. is there a bug open for this
with foundry .. or is it fixed in any code?

On Tue, 21 Sep 2004, Cliff Fogle wrote:

> So I found a work around for the serveriron XL series not accepting
> pasted commands to the CLI and possibly even halting on doing so.
>
> See the solution here:
> http://www.shoint.org/foundrytwiki/bin/view/Foundry/CutAndPasteFix
>
> And with that I would like to introduce a very incomplete Twiki for
> Foundry Devices:
>
> http://www.shoint.org
>
> You all are the beta testers...email me at shoint@ajax2440.org with
> any suggestions and please feel free to add or modify any topic in the

> Foundry web. I just received an IronPoint and so hopefully will have
> some useful configuration references for that.
>
> (And yes...it is served off of a pentium 2 compaq mini desktop in my
> loft.)
>
> -----Original Message-----
> From: Matt Stockdale [mailto:mstockda@logicworks.net]
> Sent: Wednesday, August 04, 2004 1:18 PM
> To: Cliff Fogle
> Cc: foundry-nsp@puck.nether.net
> Subject: Re: [f-nsp] Term sessions...
>
> I have the same issues, although I can and do cut and paste without
> problem. I haven't found a workaround, but then, I haven't really
> looked.
>
> On Mon, 2004-08-02 at 21:45, Cliff Fogle wrote:
> > Anyone else have trouble with terminal/ssh/telnet sessions on
> > foundry devices? Coming from Linux I can't get my backspace and
> > delete keys to work for the life of me, which sticks me with ctrl-H
for delete.
> > If I use 'screen' it's fixed...still though.
> >
> > And I can't cut and paste into a serverIron from any session, it
> > always takes 1 or 2 lines then just craps out on the rest.
> >
> > This across many different code versions and platforms including
> > ServerIron, FastIron and NetIron.
> >
> > The EdgeIron's work fine for some reason...
> >
> > ____________________________________________________________________
> > __ _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp@puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>