Mailing List Archive

On Aug 10, 2010, at 4:34 PM, Marcin Kuczera wrote:

> hello,
>
> I have a strange problem, there is a Summit400-48t switch with this license:
> Platform: Summit400-48t
> License: Advanced Edge + Security
>
> the only limitation described in DSSUM400_48t file is:
> Note: OSPF Edge License includes 2 active
> interfaces, router priority 0
>
> There is no info about PIM limitations at all.
> License is max what can be installed on that switch.
>
> Image : Extremeware Version 7.8e.1.1 [ssh] by Release_Master on
> 05/23/08 06:17:30
>
> PIM allows only 2 active neighbours, abouve screems about license
> limitation that on this platform can not be higher.
>
> Anyone knows what is the problem ?
> Doesn't it look like some bug in license implementation ?
>
> Regards,
> Marcin

I have this same problem with ExtremeXOS version 12.0.2.25 on a X250e-48t with the advanced edge license. I was told it would only allow two OSPF adjacencies (which is silly) but nothing about PIM limitations but I can only have 2 PIM neighbors as well.

Tom
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp

Hello,

You can find the info in the User/Concept Guide Annex.

Licence Advanced Edge:
EXOS 12.4 (for the Summit X250) limitation OSFP-Edge is maximum 4 active
interfaces and (not DR applicable if IP Subnet larger than /30)
PIM, only PIM-SM with max 2 active interface and no RP)

If you want no more this limit you have to buy a switch that is CORE
License capable (X450a, X480, X650, BD) they are more powerfull to handle
more features.

EW 7.8
PIM-SM and OSPF but with max. 2 interfaces active.

Fabian.


-----Original Message-----
From: extreme-nsp-bounces@puck.nether.net
[mailto:extreme-nsp-bounces@puck.nether.net] On Behalf Of Tom Pusateri
Sent: mercredi 11 août 2010 02:11
To: Marcin Kuczera
Cc: extreme-nsp@puck.nether.net
Subject: Re: [e-nsp] Summit400 and license limitation


On Aug 10, 2010, at 4:34 PM, Marcin Kuczera wrote:

> hello,
>
> I have a strange problem, there is a Summit400-48t switch with this
license:
> Platform: Summit400-48t
> License: Advanced Edge + Security
>
> the only limitation described in DSSUM400_48t file is:
> Note: OSPF Edge License includes 2 active
> interfaces, router priority 0
>
> There is no info about PIM limitations at all.
> License is max what can be installed on that switch.
>
> Image : Extremeware Version 7.8e.1.1 [ssh] by Release_Master on
> 05/23/08 06:17:30
>
> PIM allows only 2 active neighbours, abouve screems about license
> limitation that on this platform can not be higher.
>
> Anyone knows what is the problem ?
> Doesn't it look like some bug in license implementation ?
>
> Regards,
> Marcin

I have this same problem with ExtremeXOS version 12.0.2.25 on a X250e-48t
with the advanced edge license. I was told it would only allow two OSPF
adjacencies (which is silly) but nothing about PIM limitations but I can
only have 2 PIM neighbors as well.

Tom
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp


_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp

On Aug 11, 2010, at 5:54 AM, Fabian wrote:

> Hello,
>
> You can find the info in the User/Concept Guide Annex.
>
> Licence Advanced Edge:
> EXOS 12.4 (for the Summit X250) limitation OSFP-Edge is maximum 4 active
> interfaces and (not DR applicable if IP Subnet larger than /30)
> PIM, only PIM-SM with max 2 active interface and no RP)
>
> If you want no more this limit you have to buy a switch that is CORE
> License capable (X450a, X480, X650, BD) they are more powerfull to handle
> more features.
>
> EW 7.8
> PIM-SM and OSPF but with max. 2 interfaces active.
>
> Fabian.

I think there is a bug then because right now I only get 2 max neighbors not 2 max interfaces with PIM.

Tom
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp

I think there was a change in 12.1 (from 2 neighbors to 4, and to 4 actives
Interfaces).

Fabian.

-----Original Message-----
From: Tom Pusateri [mailto:pusateri@bangj.com]
Sent: mercredi 11 août 2010 14:20
To: Fabian
Cc: 'Marcin Kuczera'; extreme-nsp@puck.nether.net
Subject: Re: [e-nsp] Summit400 and license limitation


On Aug 11, 2010, at 5:54 AM, Fabian wrote:

> Hello,
>
> You can find the info in the User/Concept Guide Annex.
>
> Licence Advanced Edge:
> EXOS 12.4 (for the Summit X250) limitation OSFP-Edge is maximum 4 active
> interfaces and (not DR applicable if IP Subnet larger than /30)
> PIM, only PIM-SM with max 2 active interface and no RP)
>
> If you want no more this limit you have to buy a switch that is CORE
> License capable (X450a, X480, X650, BD) they are more powerfull to handle
> more features.
>
> EW 7.8
> PIM-SM and OSPF but with max. 2 interfaces active.
>
> Fabian.

I think there is a bug then because right now I only get 2 max neighbors not
2 max interfaces with PIM.

Tom=


_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp