Mailing List Archive

hello,

is it possible to modify a sharing algorythm and other properties of
already configured sharing group ?

what I have is:
Slot-1 SummitStack-GZE.2 # show sharing
Load Sharing Monitor
Config Current Agg Ld Share Ld Share Agg Link Link Up
Master Master Control Algorithm Group Mbr State
Transitions
==============================================================================
1:13 1:13 Static L3_L4 1:13 Y A 1
L3_L4 1:14 Y A 3
1:15 1:15 Static L3_L4 1:15 Y A 0
L3_L4 1:16 Y A 0
1:17 1:17 Static L3_L4 1:17 Y A 2
L3_L4 1:18 - R 0
1:19 1:19 Static L3_L4 1:19 Y A 2
L3_L4 1:20 Y A 2
1:25 1:25 Static L3_L4 1:25 Y A 0
L3_L4 1:26 Y A 0
L3_L4 1:27 Y A 0
L3_L4 1:28 Y A 0
2:1 Static L3_L4 2:1 - R 0
L3_L4 2:2 - R 0
==============================================================================

But, I want to modify them i.e. to custom algorythm (the same by
default) like in here:

enable sharing 1:25 grouping 1:25-1:28 algorithm address-based custom

Is it the only way to unconfigure sharing on particular port and then
create new (same) sharing group with new algorythm ?

L3_L4 seems to be the most efficient in equal load sharing, but.. have
some DHCP issues then... have no idea why..


When I do:
disable sharing 1:25
then all vlans from master ports were removed...

Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp