Mailing List Archive

On 12/29/2009 3:08 PM, Marcin Kuczera wrote:
> hello,
>
> does any one knows if the Summit x450-24x (not x450a, so the first x450)
> will work with 2xSFP+ 10G module (or any newer than for XENPAK) ???
>
> data sheet lists only the one for XENPAK, but.. it is quite not up to date.
>
>
> Btw, how do I enable stacking in this switch ?
> there is no enable stacking command.
>
> XOS 11.4
>

Not sure about the SFP+, but I believe stacking needs 12.0 or higher.

/Eric
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp

Only XGM-2xn/Xenpak is working on X450.

XGM2 with SFP+ is only for X350, X450e and X450a.

Fabian.
-----Original Message-----
From: extreme-nsp-bounces@puck.nether.net
[mailto:extreme-nsp-bounces@puck.nether.net] On Behalf Of Marcin Kuczera
Sent: mardi 29 décembre 2009 22:09
To: extreme-nsp@puck.nether.net
Subject: [e-nsp] Summit x450 (not a) and SFP+ 10G module

hello,

does any one knows if the Summit x450-24x (not x450a, so the first x450)
will work with 2xSFP+ 10G module (or any newer than for XENPAK) ???

data sheet lists only the one for XENPAK, but.. it is quite not up to date.


Btw, how do I enable stacking in this switch ?
there is no enable stacking command.

XOS 11.4

Regards,
Marcin
_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp

_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp

Fabian wrote:
> Only XGM-2xn/Xenpak is working on X450.
>
> XGM2 with SFP+ is only for X350, X450e and X450a.

:(
ok, I suppose that x450 has the same chipset on-board as summit400 that
also has this limitation, only processor is different to run XOS.

So - anyone has XGM-2xn/Xenpak for sale @ good price ? ;-)
On the other side I have x650

Regards,
Marcin



>
> Fabian.
> -----Original Message-----
> From: extreme-nsp-bounces@puck.nether.net
> [mailto:extreme-nsp-bounces@puck.nether.net] On Behalf Of Marcin Kuczera
> Sent: mardi 29 décembre 2009 22:09
> To: extreme-nsp@puck.nether.net
> Subject: [e-nsp] Summit x450 (not a) and SFP+ 10G module
>
> hello,
>
> does any one knows if the Summit x450-24x (not x450a, so the first x450)
> will work with 2xSFP+ 10G module (or any newer than for XENPAK) ???
>
> data sheet lists only the one for XENPAK, but.. it is quite not up to date.
>
>
> Btw, how do I enable stacking in this switch ?
> there is no enable stacking command.
>
> XOS 11.4
>
> Regards,
> Marcin
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
>
> _______________________________________________
> extreme-nsp mailing list
> extreme-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/extreme-nsp
>

_______________________________________________
extreme-nsp mailing list
extreme-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/extreme-nsp