There's yet another entry you may need to set:
preferredredir=full
This needs to be set in system.ini, typically in the directory where you
keep the "net" command on your bootdisk. That way, you won't have to issue
"net start /full" but a "net start" will suffice. If that still doesn't
help, also set
autostart=full
in system.ini - this has always worked for us.
See
http://now.netapp.com/Knowledgebase/solutionarea.asp?id=ntapcs3583 for
details and also see
http://now.netapp.com/Knowledgebase/solutionarea.asp?id=ntapcs2762 - there's
a typo in that article, though - it needs to be preferredredir instead of
prefrredredir.
Greetings,
Bernhard Friedrich
Uniklinikum Heidelberg
ZIM - Server und Basissysteme
-----Ursprüngliche Nachricht-----
Von: Steven Boyer GD-Mail [mailto:steven.boyer@gd-centcom.com]
Gesendet: Donnerstag, 5. Dezember 2002 17:40
An: Kumar, Rahul; Hall, Tom; toasters@mathworks.com
Betreff: Re: Accessing Filer from DOS
We made all those changes and still no glory
----- Original Message -----
From: Kumar, Rahul
To: Hall, Tom ; steven boyer ; toasters@mathworks.com
Sent: Wednesday, December 04, 2002 10:52 PM
Subject: RE: Accessing Filer from DOS
Hi,
You just need to modify the following line in the floppy to gain access to
filers from DOS prompt.
By default, the boot disk builder uses basic redirection. The Filers
require Full redirection to make connections.
Edit the A:\autoexec.bat on the floppy you just created and look for the
line
net start basic
Change this line to read
net start full
That will take care of the problem.
Rahul Kumar,
Tele: + 91 20 2930812 (D),
Cell: + 91 982230 9177.
EDS PLM Solutions, Pune, India.
-----Original Message-----
From: Hall, Tom [mailto:Tom.Hall@exchange.webmd.net]
Sent: Thursday, December 05, 2002 2:46 AM
To: 'steven boyer'; toasters@mathworks.com
Subject: RE: Accessing Filer from DOS
I ran into a similar issue with a network boot disk that Norton Ghost made.
I solved the problem by using Bart's network boot disk to connect to our
filer. They seem to keep up with new dos drivers/utils for tcp/ip, ms
network client, and nic drivers.
You can download the disk from
http://students.lco-college.edu/bootcd/network_boot_disk.htm -----Original Message-----
From: steven boyer [mailto:sboyer1@tampabay.rr.com]
Sent: Wednesday, December 04, 2002 12:11 PM
To: toasters@mathworks.com
Subject: Accessing Filer from DOS
If a NT server goes down, we want to be able to re-image the windows server
from the filer. We must do this from a DOS prompt. So the question is how do
I access the filer using DOS.
The following is the information from our NT Admin:
I am trying to connect to the filer at \\crsqfiler\image to create and store
images of our WIN2K servers. I used Powerquest to create the boot disks
(Powerquest Boot Disk Builder Version 5.01 Build Bdb501.012). I receive the
following error when attempting to connect to the filer from DOS - Error 58
The network has responded incorrectly. Attempts to connect to other
sharepoints on the filer are also unsuccessful. I can connect to any WIN2K
Share with no problem. I have reviewed the issues in the NETAPP Knowledge
base, as well as, Powerquest's knowledge base and can find no remedy
Has anyone been able to get this to work?
Steven