I have long used (upto 30) a pair. of haupauge usb tuners
I recenty upgraded to 31, and after a few fumbles
I can scan channels
I get resonable. results
dmesg shows cards found, firmware loaded
epg gets reasonable results
record a channel results in the red no later by X symbol
Watch live TV shows signal strengh of 90% but no lock
Record has the unable to get lock pop-up
What can I be looking for. Using my lucky-packet cards does work, these cards used to work
James
PS
[ 11.726855] rc rc1: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/rc/rc1
[ 11.726879] rc rc1: lirc_dev: driver em28xx registered at minor = 1, scancode receiver, no transmitter
[ 11.726912] input: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/rc/rc1/input14
[ 11.726940] em28xx 1-4:1.0: Input extension successfully initialized
[ 11.726941] em28xx 1-4:1.0: Remote control support is not available for this card.
[ 11.726942] em28xx: Registered (Em28xx Input Extension) extension
[ 11.733792] No iBFT detected.
[ 16.762855] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.856437] NET: Registered protocol family 17
[ 19.946724] fuse: init (API version 7.31)
[ 20.076264] si2168 12-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 20.284000] si2168 12-0064: firmware version: B 4.0.11
[ 20.288097] si2157 17-0060: found a 'Silicon Labs Si2157-A30'
[ 20.335988] si2157 17-0060: firmware version: 3.0.5
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org
I recenty upgraded to 31, and after a few fumbles
I can scan channels
I get resonable. results
dmesg shows cards found, firmware loaded
epg gets reasonable results
record a channel results in the red no later by X symbol
Watch live TV shows signal strengh of 90% but no lock
Record has the unable to get lock pop-up
What can I be looking for. Using my lucky-packet cards does work, these cards used to work
James
PS
[ 11.726855] rc rc1: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/rc/rc1
[ 11.726879] rc rc1: lirc_dev: driver em28xx registered at minor = 1, scancode receiver, no transmitter
[ 11.726912] input: Hauppauge WinTV-dualHD DVB as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/rc/rc1/input14
[ 11.726940] em28xx 1-4:1.0: Input extension successfully initialized
[ 11.726941] em28xx 1-4:1.0: Remote control support is not available for this card.
[ 11.726942] em28xx: Registered (Em28xx Input Extension) extension
[ 11.733792] No iBFT detected.
[ 16.762855] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.856437] NET: Registered protocol family 17
[ 19.946724] fuse: init (API version 7.31)
[ 20.076264] si2168 12-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
[ 20.284000] si2168 12-0064: firmware version: B 4.0.11
[ 20.288097] si2157 17-0060: found a 'Silicon Labs Si2157-A30'
[ 20.335988] si2157 17-0060: firmware version: 3.0.5
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://lists.mythtv.org/mailman/listinfo/mythtv-users
http://wiki.mythtv.org/Mailing_List_etiquette
MythTV Forums: https://forum.mythtv.org