>Thanks for the info Toby. I did try the RC30 config but with no luck. My Sky
>box is a Pace DSR2000 and uses a different protocol for the remote. Anyway
>I'm building up an ir receiver to learn the RC18 codes again. When Ive done
>it I'll post it if anybody is interested,
>Cheers
>Simon
I've got a DSR2000 and it uses the RC-30 config by Jon Waite. It's
in the list of standard remotes (I can't remember the address of
those, so I've copied the config below)
The one things I did notice is that the IR transmitter has to be in
exactly the right place for it to work (about 5-6 cm from the
receiver).
I'm using one of the IR Blasters from irblaster.info, and it came
with double sided tape attached, suggesting the transmitter should be
attached to the receiver, but it won't work if I do that. At the
time I thought I had the wrong config, but with prompting from Dagan,
I tried the RC-30 profile and it worked (dependent on placement)
So, I'd suggest giving the RC-30 codes another go. 8)
- Wade
#
# this config file was automatically generated
# using lirc-0.7.0pre2 on Sat Feb 7 18:25:52 2004
#
# contributed by: Jon Waite <jon at jonwaite dot com>
#
# brand: Pace
# model no. of remote control: RC-30
# devices being controlled by this remote: Pace DSR620-GM Sky Digital
# Decoder (New Zealand)
#
begin remote
name Pace_RC-30
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9020 4544
one 541 1696
zero 541 579
ptrail 506
repeat 9014 2311
pre_data_bits 16
pre_data 0x213C
gap 107807
toggle_bit 0
begin codes
red 0x0000000000007C83
green 0x000000000000B44B
yellow 0x000000000000BC43
blue 0x000000000000FC03
1 0x0000000000000CF3
2 0x000000000000946B
3 0x0000000000009C63
4 0x00000000000014EB
5 0x00000000000004FB
6 0x0000000000001CE3
7 0x0000000000004CB3
8 0x00000000000054AB
9 0x00000000000044BB
0 0x000000000000CC33
tv 0x0000000000008C73
reserved 0x000000000000F40B
volup 0x000000000000649B
voldown 0x000000000000E41B
mute 0x000000000000A45B
chanup 0x000000000000AC53
chandown 0x000000000000EC13
guide 0x000000000000748B
back 0x0000000000005CA3
interactive 0x0000000000006C93
up 0x000000000000D42B
down 0x00000000000024DB
left 0x0000000000002CD3
right 0x000000000000DC23
ok 0x000000000000C43B
plus 0x0000000000003CC3
question 0x00000000000034CB
power 0x000000000000847B
end codes
end remote
_______________________________________________
mythtvnz mailing list
mythtvnz@lists.linuxnut.co.nz
http://lists.ourshack.com/mailman/listinfo/mythtvnz Archives
http://www.gossamer-threads.com/lists/mythtv/mythtvnz/