Thomas,
There was a need for me to run the latest cluster stuff on Debian 7.
So I created a document for myself to use.
I don't claim this doc to be the best way to go, but it works for me.
I hope it will work for you as well.
Here is the doc's content:
Software
-
libqb 0.17.0
-
corosync 2.3.3
-
cluster-glue 1.0.12
-
resource-agents 3.9.5
-
pacemaker 1.1.12
-
crmsh 2.1.0
IMPORTANT: do this installation step-by-step as here, the order is
significant.
Pre-Configuration
$ sudo apt-get install build-essential
$ sudo apt-get install automake autoconf
$ sudo apt-get install libtool
$ sudo apt-get install pkg-config
LIBQB (needed by Corosync)
https://github.com/ClusterLabs/libqb/releases $ echo "0.17.0" > .tarball-version
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install
COROSYNC
https://github.com/corosync/corosync/releases $ sudo apt-get install libnss3-dev
$ echo "2.3.3" > .tarball-version
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install
CLUSTER-GLUE (node fencing plugins, an error reporting utility, and other
reusable cluster components from the Linux HA project)
http://hg.linux-ha.org/glue/archive/glue-1.0.12.tar.bz2 $ sudo apt-get install libaio-dev
(!) install dependencies for pacemaker (below) before proceed
$ ./autogen.sh
$ ./configure --enable-fatal-warnings=no
$ make
$ sudo make install
RESOURCE-AGENTS (Combined repository of OCF agents from the RHCS and
Linux-HA projects)
https://github.com/ClusterLabs/resource-agents/releases $ echo "3.9.5" > .tarball-version
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install
PACEMAKER
https://github.com/ClusterLabs/pacemaker/releases $ sudo apt-get install uuid-dev
$ sudo apt-get install libglib2.0-dev
$ sudo apt-get install libxml2-dev
$ sudo apt-get install libxslt1-dev
$ sudo apt-get install libbz2-dev
$ sudo apt-get install libncurses5-dev
$ sudo addgroup --system haclient
$ sudo adduser --system --no-create-home --ingroup haclient hacluster
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install
CRMSH
https://github.com/crmsh/crmsh/releases $ sudo apt-get install python-lxml
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install
Thank you,
Kostya
On Thu, Jan 15, 2015 at 5:44 PM, Thomas Manninger <DBGTMaster@gmx.at> wrote:
> Hi,
>
> i also compiled the pacemaker_mgmt. I can start the hb_gui, but i have no
> server daemon?
> I used git://github.com/ClusterLabs/pacemaker-mgmt.git as source.
>
> Is the server in another repo??
>
> I used:
> ./ConfigureMe configure
> ./ConfigureMe make
> checkinstall --fstrans=no ./ConfigureMe install
>
> regards
> thomas
>
> *Gesendet:* Donnerstag, 15. Januar 2015 um 15:16 Uhr
> *Von:* "Ken Gaillot" <kgaillot@redhat.com>
> *An:* pacemaker@oss.clusterlabs.org
> *Betreff:* Re: [Pacemaker] pacemaker-remote debian wheezy
> On 01/15/2015 08:18 AM, Kristoffer Grönlund wrote:
> > Thomas Manninger <DBGTMaster@gmx.at> writes:
> >
> >> Hi,
> >> I compiled the latest libqb, corosync and pacemaker from source.
> >> Now there is no crm command available? Is there another standard
> >> shell?
> >> Should i use crmadmin?
> >> Thanks!
> >> Regards
> >> Thomas
> >
> > You can get crmsh and build from source at crmsh.github.io, or try the
> > .rpm packages for various distributions here:
> >
> >
> https://build.opensuse.org/package/show/network:ha-clustering:Stable/crmsh
>
> Congratulations on getting that far, that's probably the hardest part :-)
>
> The crm shell was part of the pacemaker packages in Debian squeeze. It
> was going to be separated into its own package for jessie, but that
> hasn't made it out of sid/unstable yet, so it might not make it into the
> final release.
>
> Since you've built everything else from source, that's probably easiest,
> but if you want to try ...
>
> For the rpm mentioned above, have a look at alien
> (https://wiki.debian.org/Alien). crmsh is a standalone package so
> hopefully it would work; I wouldn't try alien for something as
> complicated as all the rpm's that go into a pacemaker install.
>
> You could try backporting the sid package
> https://packages.debian.org/source/sid/crmsh but I suspect the
> dependencies would get you.
>
> In theory the crm binary from the squeeze packages should work with the
> newer pacemaker, if you can straighten out the library dependencies.
>
> Or you can use the crm*/cib* command-line tools that come with pacemaker
> if you don't mind the lower-level approach.
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>
>