Mailing List Archive

[PATCH v7 5/5] clk: meson: c3: add c3 clock peripherals controller driver
Add the C3 peripherals clock controller driver in the C3 SoC family.

Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
drivers/clk/meson/Kconfig | 15 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
3 files changed, 2382 insertions(+)
create mode 100644 drivers/clk/meson/c3-peripherals.c

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 9f975a980581..0b85d584910e 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
AKA C3. Say Y if you want the board to work, because PLLs are the parent
of most peripherals.

+config COMMON_CLK_C3_PERIPHERALS
+ tristate "Amlogic C3 peripherals clock controller"
+ depends on ARM64
+ depends on ARM_SCMI_PROTOCOL
+ depends on COMMON_CLK_SCMI
+ depends on COMMON_CLK_C3_PLL
+ default y
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_DUALDIV
+ select COMMON_CLK_MESON_CLKC_UTILS
+ help
+ Support for the Peripherals clock controller on Amlogic C302X and
+ C308L devices, AKA C3. Say Y if you want the peripherals clock to
+ work.
+
config COMMON_CLK_G12A
tristate "G12 and SM1 SoC clock controllers support"
depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 4420af628b31..20ad9482c892 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
+obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
new file mode 100644
index 000000000000..0f834ced0ee9
--- /dev/null
+++ b/drivers/clk/meson/c3-peripherals.c
@@ -0,0 +1,2366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic C3 Peripherals Clock Controller Driver
+ *
+ * Copyright (c) 2023 Amlogic, inc.
+ * Author: Chuan Liu <chuan.liu@amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-regmap.h"
+#include "clk-dualdiv.h"
+#include "meson-clkc-utils.h"
+#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+
+#define RTC_BY_OSCIN_CTRL0 0x8
+#define RTC_BY_OSCIN_CTRL1 0xc
+#define RTC_CTRL 0x10
+#define SYS_CLK_EN0_REG0 0x44
+#define SYS_CLK_EN0_REG1 0x48
+#define SYS_CLK_EN0_REG2 0x4c
+#define CLK12_24_CTRL 0xa8
+#define AXI_CLK_EN0 0xac
+#define VDIN_MEAS_CLK_CTRL 0xf8
+#define VAPB_CLK_CTRL 0xfc
+#define MIPIDSI_PHY_CLK_CTRL 0x104
+#define GE2D_CLK_CTRL 0x10c
+#define ISP0_CLK_CTRL 0x110
+#define DEWARPA_CLK_CTRL 0x114
+#define VOUTENC_CLK_CTRL 0x118
+#define VDEC_CLK_CTRL 0x140
+#define VDEC3_CLK_CTRL 0x148
+#define TS_CLK_CTRL 0x158
+#define ETH_CLK_CTRL 0x164
+#define NAND_CLK_CTRL 0x168
+#define SD_EMMC_CLK_CTRL 0x16c
+#define SPICC_CLK_CTRL 0x174
+#define GEN_CLK_CTRL 0x178
+#define SAR_CLK_CTRL0 0x17c
+#define PWM_CLK_AB_CTRL 0x180
+#define PWM_CLK_CD_CTRL 0x184
+#define PWM_CLK_EF_CTRL 0x188
+#define PWM_CLK_GH_CTRL 0x18c
+#define PWM_CLK_IJ_CTRL 0x190
+#define PWM_CLK_KL_CTRL 0x194
+#define PWM_CLK_MN_CTRL 0x198
+#define VC9000E_CLK_CTRL 0x19c
+#define SPIFC_CLK_CTRL 0x1a0
+#define NNA_CLK_CTRL 0x220
+
+static struct clk_regmap rtc_xtal_clkin = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = RTC_BY_OSCIN_CTRL0,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_xtal_clkin",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "oscin",
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct meson_clk_dualdiv_param rtc_32k_div_table[] = {
+ { 733, 732, 8, 11, 1 },
+ { /* sentinel */ }
+};
+
+static struct clk_regmap rtc_32k_div = {
+ .data = &(struct meson_clk_dualdiv_data) {
+ .n1 = {
+ .reg_off = RTC_BY_OSCIN_CTRL0,
+ .shift = 0,
+ .width = 12,
+ },
+ .n2 = {
+ .reg_off = RTC_BY_OSCIN_CTRL0,
+ .shift = 12,
+ .width = 12,
+ },
+ .m1 = {
+ .reg_off = RTC_BY_OSCIN_CTRL1,
+ .shift = 0,
+ .width = 12,
+ },
+ .m2 = {
+ .reg_off = RTC_BY_OSCIN_CTRL1,
+ .shift = 12,
+ .width = 12,
+ },
+ .dual = {
+ .reg_off = RTC_BY_OSCIN_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .table = rtc_32k_div_table,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k_div",
+ .ops = &meson_clk_dualdiv_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &rtc_xtal_clkin.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct clk_parent_data rtc_32k_mux_parent_data[] = {
+ { .hw = &rtc_32k_div.hw },
+ { .hw = &rtc_xtal_clkin.hw }
+};
+
+static struct clk_regmap rtc_32k_mux = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = RTC_BY_OSCIN_CTRL1,
+ .mask = 0x1,
+ .shift = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k_mux",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = rtc_32k_mux_parent_data,
+ .num_parents = ARRAY_SIZE(rtc_32k_mux_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap rtc_32k = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = RTC_BY_OSCIN_CTRL0,
+ .bit_idx = 30,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_32k",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &rtc_32k_mux.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data rtc_clk_mux_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .hw = &rtc_32k.hw },
+ { .fw_name = "pad_osc" }
+};
+
+static struct clk_regmap rtc_clk = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = RTC_CTRL,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "rtc_clk",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = rtc_clk_mux_parent_data,
+ .num_parents = ARRAY_SIZE(rtc_clk_mux_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+#define C3_CLK_GATE(_name, _reg, _bit, _fw_name, _ops, _flags) \
+struct clk_regmap _name = { \
+ .data = &(struct clk_regmap_gate_data){ \
+ .offset = (_reg), \
+ .bit_idx = (_bit), \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = #_name, \
+ .ops = _ops, \
+ .parent_data = &(const struct clk_parent_data) { \
+ .fw_name = #_fw_name, \
+ }, \
+ .num_parents = 1, \
+ .flags = (_flags), \
+ }, \
+}
+
+#define C3_SYS_GATE(_name, _reg, _bit, _flags) \
+ C3_CLK_GATE(_name, _reg, _bit, sysclk, \
+ &clk_regmap_gate_ops, _flags)
+
+#define C3_SYS_GATE_RO(_name, _reg, _bit) \
+ C3_CLK_GATE(_name, _reg, _bit, sysclk, \
+ &clk_regmap_gate_ro_ops, 0)
+
+static C3_SYS_GATE(sys_reset_ctrl, SYS_CLK_EN0_REG0, 1, 0);
+static C3_SYS_GATE(sys_pwr_ctrl, SYS_CLK_EN0_REG0, 3, 0);
+static C3_SYS_GATE(sys_pad_ctrl, SYS_CLK_EN0_REG0, 4, 0);
+static C3_SYS_GATE(sys_ctrl, SYS_CLK_EN0_REG0, 5, 0);
+static C3_SYS_GATE(sys_ts_pll, SYS_CLK_EN0_REG0, 6, 0);
+
+/*
+ * NOTE: sys_dev_arb provides the clock to the ETH and SPICC arbiters that
+ * access the AXI bus.
+ */
+static C3_SYS_GATE(sys_dev_arb, SYS_CLK_EN0_REG0, 7, 0);
+
+/*
+ * FIXME: sys_mmc_pclk provides the clock for the DDR PHY, DDR will only be
+ * initialized in bl2, and this clock should not be touched in linux.
+ */
+static C3_SYS_GATE_RO(sys_mmc_pclk, SYS_CLK_EN0_REG0, 8);
+
+/*
+ * NOTE: sys_cpu_ctrl provides the clock for CPU controller. After clock is
+ * disabled, cpu_clk and other key CPU-related configurations cannot take effect.
+ */
+static C3_SYS_GATE(sys_cpu_ctrl, SYS_CLK_EN0_REG0, 11, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_jtag_ctrl, SYS_CLK_EN0_REG0, 12, 0);
+static C3_SYS_GATE(sys_ir_ctrl, SYS_CLK_EN0_REG0, 13, 0);
+
+/*
+ * NOTE: sys_irq_ctrl provides the clock for IRQ controller. The IRQ controller
+ * collects and distributes the interrupt signal to the GIC, PWR_CTRL, and
+ * AOCPU. If the clock is disabled, interrupt-related functions will occurs an
+ * exception.
+ */
+static C3_SYS_GATE(sys_irq_ctrl, SYS_CLK_EN0_REG0, 14, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_msr_clk, SYS_CLK_EN0_REG0, 15, 0);
+static C3_SYS_GATE(sys_rom, SYS_CLK_EN0_REG0, 16, 0);
+static C3_SYS_GATE(sys_uart_f, SYS_CLK_EN0_REG0, 17, 0);
+static C3_SYS_GATE(sys_cpu_apb, SYS_CLK_EN0_REG0, 18, 0);
+static C3_SYS_GATE(sys_rsa, SYS_CLK_EN0_REG0, 19, 0);
+static C3_SYS_GATE(sys_sar_adc, SYS_CLK_EN0_REG0, 20, 0);
+static C3_SYS_GATE(sys_startup, SYS_CLK_EN0_REG0, 21, 0);
+static C3_SYS_GATE(sys_secure, SYS_CLK_EN0_REG0, 22, 0);
+static C3_SYS_GATE(sys_spifc, SYS_CLK_EN0_REG0, 23, 0);
+static C3_SYS_GATE(sys_nna, SYS_CLK_EN0_REG0, 25, 0);
+static C3_SYS_GATE(sys_eth_mac, SYS_CLK_EN0_REG0, 26, 0);
+
+/*
+ * FIXME: sys_gic provides the clock for GIC(Generic Interrupt Controller).
+ * After clock is disabled, The GIC cannot work properly. At present, the driver
+ * used by our GIC is the public driver in kernel, and there is no management
+ * clock in the driver.
+ */
+static C3_SYS_GATE(sys_gic, SYS_CLK_EN0_REG0, 27, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_rama, SYS_CLK_EN0_REG0, 28, 0);
+
+/*
+ * NOTE: sys_big_nic provides the clock to the control bus of the NIC(Network
+ * Interface Controller) between multiple devices(CPU, DDR, RAM, ROM, GIC,
+ * SPIFC, CAPU, JTAG, EMMC, SDIO, sec_top, USB, Audio, ETH, SPICC) in the
+ * system. After clock is disabled, The NIC cannot work.
+ */
+static C3_SYS_GATE(sys_big_nic, SYS_CLK_EN0_REG0, 29, CLK_IS_CRITICAL);
+static C3_SYS_GATE(sys_ramb, SYS_CLK_EN0_REG0, 30, 0);
+static C3_SYS_GATE(sys_audio_pclk, SYS_CLK_EN0_REG0, 31, 0);
+static C3_SYS_GATE(sys_pwm_kl, SYS_CLK_EN0_REG1, 0, 0);
+static C3_SYS_GATE(sys_pwm_ij, SYS_CLK_EN0_REG1, 1, 0);
+static C3_SYS_GATE(sys_usb, SYS_CLK_EN0_REG1, 2, 0);
+static C3_SYS_GATE(sys_sd_emmc_a, SYS_CLK_EN0_REG1, 3, 0);
+static C3_SYS_GATE(sys_sd_emmc_c, SYS_CLK_EN0_REG1, 4, 0);
+static C3_SYS_GATE(sys_pwm_ab, SYS_CLK_EN0_REG1, 5, 0);
+static C3_SYS_GATE(sys_pwm_cd, SYS_CLK_EN0_REG1, 6, 0);
+static C3_SYS_GATE(sys_pwm_ef, SYS_CLK_EN0_REG1, 7, 0);
+static C3_SYS_GATE(sys_pwm_gh, SYS_CLK_EN0_REG1, 8, 0);
+static C3_SYS_GATE(sys_spicc_1, SYS_CLK_EN0_REG1, 9, 0);
+static C3_SYS_GATE(sys_spicc_0, SYS_CLK_EN0_REG1, 10, 0);
+static C3_SYS_GATE(sys_uart_a, SYS_CLK_EN0_REG1, 11, 0);
+static C3_SYS_GATE(sys_uart_b, SYS_CLK_EN0_REG1, 12, 0);
+static C3_SYS_GATE(sys_uart_c, SYS_CLK_EN0_REG1, 13, 0);
+static C3_SYS_GATE(sys_uart_d, SYS_CLK_EN0_REG1, 14, 0);
+static C3_SYS_GATE(sys_uart_e, SYS_CLK_EN0_REG1, 15, 0);
+static C3_SYS_GATE(sys_i2c_m_a, SYS_CLK_EN0_REG1, 16, 0);
+static C3_SYS_GATE(sys_i2c_m_b, SYS_CLK_EN0_REG1, 17, 0);
+static C3_SYS_GATE(sys_i2c_m_c, SYS_CLK_EN0_REG1, 18, 0);
+static C3_SYS_GATE(sys_i2c_m_d, SYS_CLK_EN0_REG1, 19, 0);
+static C3_SYS_GATE(sys_i2c_s_a, SYS_CLK_EN0_REG1, 20, 0);
+static C3_SYS_GATE(sys_rtc, SYS_CLK_EN0_REG1, 21, 0);
+static C3_SYS_GATE(sys_ge2d, SYS_CLK_EN0_REG1, 22, 0);
+static C3_SYS_GATE(sys_isp, SYS_CLK_EN0_REG1, 23, 0);
+static C3_SYS_GATE(sys_gpv_isp_nic, SYS_CLK_EN0_REG1, 24, 0);
+static C3_SYS_GATE(sys_gpv_cve_nic, SYS_CLK_EN0_REG1, 25, 0);
+static C3_SYS_GATE(sys_mipi_dsi_host, SYS_CLK_EN0_REG1, 26, 0);
+static C3_SYS_GATE(sys_mipi_dsi_phy, SYS_CLK_EN0_REG1, 27, 0);
+static C3_SYS_GATE(sys_eth_phy, SYS_CLK_EN0_REG1, 28, 0);
+static C3_SYS_GATE(sys_acodec, SYS_CLK_EN0_REG1, 29, 0);
+static C3_SYS_GATE(sys_dwap, SYS_CLK_EN0_REG1, 30, 0);
+static C3_SYS_GATE(sys_dos, SYS_CLK_EN0_REG1, 31, 0);
+static C3_SYS_GATE(sys_cve, SYS_CLK_EN0_REG2, 0, 0);
+static C3_SYS_GATE(sys_vout, SYS_CLK_EN0_REG2, 1, 0);
+static C3_SYS_GATE(sys_vc9000e, SYS_CLK_EN0_REG2, 2, 0);
+static C3_SYS_GATE(sys_pwm_mn, SYS_CLK_EN0_REG2, 3, 0);
+static C3_SYS_GATE(sys_sd_emmc_b, SYS_CLK_EN0_REG2, 4, 0);
+
+#define C3_AXI_GATE(_name, _reg, _bit, _flags) \
+ C3_CLK_GATE(_name, _reg, _bit, axiclk, \
+ &clk_regmap_gate_ops, _flags)
+
+/*
+ * NOTE: axi_sys_nic provides the clock to the AXI bus of the system NIC. After
+ * clock is disabled, The NIC cannot work.
+ */
+static C3_AXI_GATE(axi_sys_nic, AXI_CLK_EN0, 2, CLK_IS_CRITICAL);
+static C3_AXI_GATE(axi_isp_nic, AXI_CLK_EN0, 3, 0);
+static C3_AXI_GATE(axi_cve_nic, AXI_CLK_EN0, 4, 0);
+static C3_AXI_GATE(axi_ramb, AXI_CLK_EN0, 5, 0);
+static C3_AXI_GATE(axi_rama, AXI_CLK_EN0, 6, 0);
+
+/*
+ * NOTE: axi_cpu_dmc provides the clock to the AXI bus where the CPU accesses
+ * the DDR. After clock is disabled, The CPU will not have access to the DDR.
+ */
+static C3_AXI_GATE(axi_cpu_dmc, AXI_CLK_EN0, 7, CLK_IS_CRITICAL);
+static C3_AXI_GATE(axi_nic, AXI_CLK_EN0, 8, 0);
+static C3_AXI_GATE(axi_dma, AXI_CLK_EN0, 9, 0);
+
+/*
+ * NOTE: axi_mux_nic provides the clock to the NIC's AXI bus for NN(Neural
+ * Network) and other devices(CPU, EMMC, SDIO, sec_top, USB, Audio, ETH, SPICC)
+ * to access RAM space.
+ */
+static C3_AXI_GATE(axi_mux_nic, AXI_CLK_EN0, 10, 0);
+static C3_AXI_GATE(axi_cve, AXI_CLK_EN0, 12, 0);
+
+/*
+ * NOTE: axi_dev1_dmc provides the clock for the peripherals(EMMC, SDIO,
+ * sec_top, USB, Audio, ETH, SPICC) to access the AXI bus of the DDR.
+ */
+static C3_AXI_GATE(axi_dev1_dmc, AXI_CLK_EN0, 13, 0);
+static C3_AXI_GATE(axi_dev0_dmc, AXI_CLK_EN0, 14, 0);
+static C3_AXI_GATE(axi_dsp_dmc, AXI_CLK_EN0, 15, 0);
+
+/*
+ * clk_12_24m model
+ *
+ * |------| |-----| clk_12m_24m |-----|
+ * xtal---->| gate |---->| div |------------>| pad |
+ * |------| |-----| |-----|
+ */
+static struct clk_regmap clk_12_24m_in = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLK12_24_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "clk_12_24m_in",
+ .ops = &clk_regmap_gate_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal_24m",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap clk_12_24m = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLK12_24_CTRL,
+ .shift = 10,
+ .width = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "clk_12_24m",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &clk_12_24m_in.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Fix me: set value 0 will div by 2 like value 1 */
+static struct clk_regmap fclk_25m_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = CLK12_24_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_25m_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap fclk_25m = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = CLK12_24_CTRL,
+ .bit_idx = 12,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "fclk_25m",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &fclk_25m_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/*
+ * Channel 3(ddr_dpll_pt_clk) is manged by the DDR module; channel 12(cts_msr_clk)
+ * is manged by clock measures module. Their hardware are out of clock tree.
+ * Channel 4 8 9 10 11 13 14 15 16 18 are not connected.
+ */
+static u32 gen_parent_table[] = { 0, 1, 2, 5, 6, 7, 17, 19, 20, 21, 22, 23, 24};
+
+static const struct clk_parent_data gen_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .hw = &rtc_clk.hw },
+ { .fw_name = "sysplldiv16" },
+ { .fw_name = "gp0" },
+ { .fw_name = "gp1" },
+ { .fw_name = "hifi" },
+ { .fw_name = "cpudiv16" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap gen_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = GEN_CLK_CTRL,
+ .mask = 0x1f,
+ .shift = 12,
+ .table = gen_parent_table,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gen_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = gen_parent_data,
+ .num_parents = ARRAY_SIZE(gen_parent_data),
+ },
+};
+
+static struct clk_regmap gen_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = GEN_CLK_CTRL,
+ .shift = 0,
+ .width = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gen_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &gen_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap gen = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = GEN_CLK_CTRL,
+ .bit_idx = 11,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gen",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &gen_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data saradc_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "sysclk" }
+};
+
+static struct clk_regmap saradc_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = SAR_CLK_CTRL0,
+ .mask = 0x1,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "saradc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = saradc_parent_data,
+ .num_parents = ARRAY_SIZE(saradc_parent_data),
+ },
+};
+
+static struct clk_regmap saradc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = SAR_CLK_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "saradc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &saradc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap saradc = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = SAR_CLK_CTRL0,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "saradc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &saradc_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data pwm_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "gp1" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv3" }
+};
+
+#define AML_PWM_CLK_MUX(_name, _reg, _shift) { \
+ .data = &(struct clk_regmap_mux_data) { \
+ .offset = _reg, \
+ .mask = 0x3, \
+ .shift = _shift, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = #_name "_sel", \
+ .ops = &clk_regmap_mux_ops, \
+ .parent_data = pwm_parent_data, \
+ .num_parents = ARRAY_SIZE(pwm_parent_data), \
+ }, \
+}
+
+#define AML_PWM_CLK_DIV(_name, _reg, _shift) { \
+ .data = &(struct clk_regmap_div_data) { \
+ .offset = _reg, \
+ .shift = _shift, \
+ .width = 8, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = #_name "_div", \
+ .ops = &clk_regmap_divider_ops, \
+ .parent_names = (const char *[]) { #_name "_sel" },\
+ .num_parents = 1, \
+ .flags = CLK_SET_RATE_PARENT, \
+ }, \
+}
+
+#define AML_PWM_CLK_GATE(_name, _reg, _bit) { \
+ .data = &(struct clk_regmap_gate_data) { \
+ .offset = _reg, \
+ .bit_idx = _bit, \
+ }, \
+ .hw.init = &(struct clk_init_data) { \
+ .name = #_name, \
+ .ops = &clk_regmap_gate_ops, \
+ .parent_names = (const char *[]) { #_name "_div" },\
+ .num_parents = 1, \
+ .flags = CLK_SET_RATE_PARENT, \
+ }, \
+}
+
+static struct clk_regmap pwm_a_sel =
+ AML_PWM_CLK_MUX(pwm_a, PWM_CLK_AB_CTRL, 9);
+static struct clk_regmap pwm_a_div =
+ AML_PWM_CLK_DIV(pwm_a, PWM_CLK_AB_CTRL, 0);
+static struct clk_regmap pwm_a =
+ AML_PWM_CLK_GATE(pwm_a, PWM_CLK_AB_CTRL, 8);
+
+static struct clk_regmap pwm_b_sel =
+ AML_PWM_CLK_MUX(pwm_b, PWM_CLK_AB_CTRL, 25);
+static struct clk_regmap pwm_b_div =
+ AML_PWM_CLK_DIV(pwm_b, PWM_CLK_AB_CTRL, 16);
+static struct clk_regmap pwm_b =
+ AML_PWM_CLK_GATE(pwm_b, PWM_CLK_AB_CTRL, 24);
+
+static struct clk_regmap pwm_c_sel =
+ AML_PWM_CLK_MUX(pwm_c, PWM_CLK_CD_CTRL, 9);
+static struct clk_regmap pwm_c_div =
+ AML_PWM_CLK_DIV(pwm_c, PWM_CLK_CD_CTRL, 0);
+static struct clk_regmap pwm_c =
+ AML_PWM_CLK_GATE(pwm_c, PWM_CLK_CD_CTRL, 8);
+
+static struct clk_regmap pwm_d_sel =
+ AML_PWM_CLK_MUX(pwm_d, PWM_CLK_CD_CTRL, 25);
+static struct clk_regmap pwm_d_div =
+ AML_PWM_CLK_DIV(pwm_d, PWM_CLK_CD_CTRL, 16);
+static struct clk_regmap pwm_d =
+ AML_PWM_CLK_GATE(pwm_d, PWM_CLK_CD_CTRL, 24);
+
+static struct clk_regmap pwm_e_sel =
+ AML_PWM_CLK_MUX(pwm_e, PWM_CLK_EF_CTRL, 9);
+static struct clk_regmap pwm_e_div =
+ AML_PWM_CLK_DIV(pwm_e, PWM_CLK_EF_CTRL, 0);
+static struct clk_regmap pwm_e =
+ AML_PWM_CLK_GATE(pwm_e, PWM_CLK_EF_CTRL, 8);
+
+static struct clk_regmap pwm_f_sel =
+ AML_PWM_CLK_MUX(pwm_f, PWM_CLK_EF_CTRL, 25);
+static struct clk_regmap pwm_f_div =
+ AML_PWM_CLK_DIV(pwm_f, PWM_CLK_EF_CTRL, 16);
+static struct clk_regmap pwm_f =
+ AML_PWM_CLK_GATE(pwm_f, PWM_CLK_EF_CTRL, 24);
+
+static struct clk_regmap pwm_g_sel =
+ AML_PWM_CLK_MUX(pwm_g, PWM_CLK_GH_CTRL, 9);
+static struct clk_regmap pwm_g_div =
+ AML_PWM_CLK_DIV(pwm_g, PWM_CLK_GH_CTRL, 0);
+static struct clk_regmap pwm_g =
+ AML_PWM_CLK_GATE(pwm_g, PWM_CLK_GH_CTRL, 8);
+
+static struct clk_regmap pwm_h_sel =
+ AML_PWM_CLK_MUX(pwm_h, PWM_CLK_GH_CTRL, 25);
+static struct clk_regmap pwm_h_div =
+ AML_PWM_CLK_DIV(pwm_h, PWM_CLK_GH_CTRL, 16);
+static struct clk_regmap pwm_h =
+ AML_PWM_CLK_GATE(pwm_h, PWM_CLK_GH_CTRL, 24);
+
+static struct clk_regmap pwm_i_sel =
+ AML_PWM_CLK_MUX(pwm_i, PWM_CLK_IJ_CTRL, 9);
+static struct clk_regmap pwm_i_div =
+ AML_PWM_CLK_DIV(pwm_i, PWM_CLK_IJ_CTRL, 0);
+static struct clk_regmap pwm_i =
+ AML_PWM_CLK_GATE(pwm_i, PWM_CLK_IJ_CTRL, 8);
+
+static struct clk_regmap pwm_j_sel =
+ AML_PWM_CLK_MUX(pwm_j, PWM_CLK_IJ_CTRL, 25);
+static struct clk_regmap pwm_j_div =
+ AML_PWM_CLK_DIV(pwm_j, PWM_CLK_IJ_CTRL, 16);
+static struct clk_regmap pwm_j =
+ AML_PWM_CLK_GATE(pwm_j, PWM_CLK_IJ_CTRL, 24);
+
+static struct clk_regmap pwm_k_sel =
+ AML_PWM_CLK_MUX(pwm_k, PWM_CLK_KL_CTRL, 9);
+static struct clk_regmap pwm_k_div =
+ AML_PWM_CLK_DIV(pwm_k, PWM_CLK_KL_CTRL, 0);
+static struct clk_regmap pwm_k =
+ AML_PWM_CLK_GATE(pwm_k, PWM_CLK_KL_CTRL, 8);
+
+static struct clk_regmap pwm_l_sel =
+ AML_PWM_CLK_MUX(pwm_l, PWM_CLK_KL_CTRL, 25);
+static struct clk_regmap pwm_l_div =
+ AML_PWM_CLK_DIV(pwm_l, PWM_CLK_KL_CTRL, 16);
+static struct clk_regmap pwm_l =
+ AML_PWM_CLK_GATE(pwm_l, PWM_CLK_KL_CTRL, 24);
+
+static struct clk_regmap pwm_m_sel =
+ AML_PWM_CLK_MUX(pwm_m, PWM_CLK_MN_CTRL, 9);
+static struct clk_regmap pwm_m_div =
+ AML_PWM_CLK_DIV(pwm_m, PWM_CLK_MN_CTRL, 0);
+static struct clk_regmap pwm_m =
+ AML_PWM_CLK_GATE(pwm_m, PWM_CLK_MN_CTRL, 8);
+
+static struct clk_regmap pwm_n_sel =
+ AML_PWM_CLK_MUX(pwm_n, PWM_CLK_MN_CTRL, 25);
+static struct clk_regmap pwm_n_div =
+ AML_PWM_CLK_DIV(pwm_n, PWM_CLK_MN_CTRL, 16);
+static struct clk_regmap pwm_n =
+ AML_PWM_CLK_GATE(pwm_n, PWM_CLK_MN_CTRL, 24);
+
+static const struct clk_parent_data spicc_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "sysclk" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "fdiv7" },
+ { .fw_name = "gp1" }
+};
+
+static struct clk_regmap spicc_a_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = SPICC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = spicc_parent_data,
+ .num_parents = ARRAY_SIZE(spicc_parent_data),
+ },
+};
+
+static struct clk_regmap spicc_a_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = SPICC_CLK_CTRL,
+ .shift = 0,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &spicc_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap spicc_a = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = SPICC_CLK_CTRL,
+ .bit_idx = 6,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &spicc_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap spicc_b_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = SPICC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 23,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = spicc_parent_data,
+ .num_parents = ARRAY_SIZE(spicc_parent_data),
+ },
+};
+
+static struct clk_regmap spicc_b_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = SPICC_CLK_CTRL,
+ .shift = 16,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &spicc_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap spicc_b = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = SPICC_CLK_CTRL,
+ .bit_idx = 22,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spicc_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &spicc_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data spifc_parent_data[] = {
+ { .fw_name = "gp0" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "hifi" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap spifc_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = SPIFC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spifc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = spifc_parent_data,
+ .num_parents = ARRAY_SIZE(spifc_parent_data),
+ },
+};
+
+static struct clk_regmap spifc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = SPIFC_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spifc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &spifc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap spifc = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = SPIFC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "spifc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &spifc_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data emmc_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "hifi" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "gp1" },
+ { .fw_name = "gp0" }
+};
+
+static struct clk_regmap sd_emmc_a_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = SD_EMMC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_a_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = emmc_parent_data,
+ .num_parents = ARRAY_SIZE(emmc_parent_data),
+ },
+};
+
+static struct clk_regmap sd_emmc_a_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = SD_EMMC_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_a_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sd_emmc_a_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sd_emmc_a = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = SD_EMMC_CLK_CTRL,
+ .bit_idx = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_a",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sd_emmc_a_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sd_emmc_b_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = SD_EMMC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = emmc_parent_data,
+ .num_parents = ARRAY_SIZE(emmc_parent_data),
+ },
+};
+
+static struct clk_regmap sd_emmc_b_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = SD_EMMC_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sd_emmc_b_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sd_emmc_b = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = SD_EMMC_CLK_CTRL,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sd_emmc_b_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sd_emmc_c_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = NAND_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = emmc_parent_data,
+ .num_parents = ARRAY_SIZE(emmc_parent_data),
+ },
+};
+
+static struct clk_regmap sd_emmc_c_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = NAND_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sd_emmc_c_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap sd_emmc_c = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = NAND_CLK_CTRL,
+ .bit_idx = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sd_emmc_c_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap ts_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = TS_CLK_CTRL,
+ .shift = 0,
+ .width = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ts_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "oscin",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap ts = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = TS_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ts",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &ts_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data eth_parent = {
+ .fw_name = "fdiv2",
+};
+
+static struct clk_fixed_factor eth_125m_div = {
+ .mult = 1,
+ .div = 8,
+ .hw.init = &(struct clk_init_data) {
+ .name = "eth_125m_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &eth_parent,
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap eth_125m = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ETH_CLK_CTRL,
+ .bit_idx = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "eth_125m",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &eth_125m_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap eth_rmii_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ETH_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "eth_rmii_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_data = &eth_parent,
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap eth_rmii = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ETH_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "eth_rmii",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &eth_rmii_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data mipi_dsi_meas_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp1" },
+ { .fw_name = "gp0" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap mipi_dsi_meas_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VDIN_MEAS_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 21,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mipi_dsi_meas_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = mipi_dsi_meas_parent_data,
+ .num_parents = ARRAY_SIZE(mipi_dsi_meas_parent_data),
+ },
+};
+
+static struct clk_regmap mipi_dsi_meas_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VDIN_MEAS_CLK_CTRL,
+ .shift = 12,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mipi_dsi_meas_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mipi_dsi_meas_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap mipi_dsi_meas = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VDIN_MEAS_CLK_CTRL,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "mipi_dsi_meas",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mipi_dsi_meas_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data dsi_phy_parent_data[] = {
+ { .fw_name = "gp1" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap dsi_phy_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = MIPIDSI_PHY_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 12,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dsi_phy_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dsi_phy_parent_data,
+ .num_parents = ARRAY_SIZE(dsi_phy_parent_data),
+ },
+};
+
+static struct clk_regmap dsi_phy_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = MIPIDSI_PHY_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dsi_phy_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &dsi_phy_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap dsi_phy = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = MIPIDSI_PHY_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dsi_phy",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &dsi_phy_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data vout_mclk_parent_data[] = {
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp1" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap vout_mclk_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VOUTENC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vout_mclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = vout_mclk_parent_data,
+ .num_parents = ARRAY_SIZE(vout_mclk_parent_data),
+ },
+};
+
+static struct clk_regmap vout_mclk_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VOUTENC_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vout_mclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vout_mclk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap vout_mclk = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VOUTENC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vout_mclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vout_mclk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data vout_enc_parent_data[] = {
+ { .fw_name = "gp1" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap vout_enc_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VOUTENC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vout_enc_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = vout_enc_parent_data,
+ .num_parents = ARRAY_SIZE(vout_enc_parent_data),
+ },
+};
+
+static struct clk_regmap vout_enc_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VOUTENC_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vout_enc_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vout_enc_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap vout_enc = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VOUTENC_CLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vout_enc",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vout_enc_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data hcodec_pre_parent_data[] = {
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "fdiv7" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp0" },
+ { .fw_name = "oscin" }
+};
+
+static struct clk_regmap hcodec_0_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VDEC_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec_0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = hcodec_pre_parent_data,
+ .num_parents = ARRAY_SIZE(hcodec_pre_parent_data),
+ },
+};
+
+static struct clk_regmap hcodec_0_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VDEC_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec_0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &hcodec_0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap hcodec_0 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VDEC_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec_0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &hcodec_0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap hcodec_1_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VDEC3_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec_1_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = hcodec_pre_parent_data,
+ .num_parents = ARRAY_SIZE(hcodec_pre_parent_data),
+ },
+};
+
+static struct clk_regmap hcodec_1_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VDEC3_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec_1_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &hcodec_1_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap hcodec_1 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VDEC3_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec_1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &hcodec_1_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data hcodec_parent_data[] = {
+ { .hw = &hcodec_0.hw },
+ { .hw = &hcodec_1.hw }
+};
+
+static struct clk_regmap hcodec = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VDEC3_CLK_CTRL,
+ .mask = 0x1,
+ .shift = 15,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hcodec",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = hcodec_parent_data,
+ .num_parents = ARRAY_SIZE(hcodec_parent_data),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data vc9000e_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "fdiv7" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp0" }
+};
+
+static struct clk_regmap vc9000e_aclk_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VC9000E_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vc9000e_aclk_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = vc9000e_parent_data,
+ .num_parents = ARRAY_SIZE(vc9000e_parent_data),
+ },
+};
+
+static struct clk_regmap vc9000e_aclk_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VC9000E_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vc9000e_aclk_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vc9000e_aclk_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap vc9000e_aclk = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VC9000E_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vc9000e_aclk",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vc9000e_aclk_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap vc9000e_core_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VC9000E_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vc9000e_core_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = vc9000e_parent_data,
+ .num_parents = ARRAY_SIZE(vc9000e_parent_data),
+ },
+};
+
+static struct clk_regmap vc9000e_core_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VC9000E_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vc9000e_core_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vc9000e_core_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap vc9000e_core = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VC9000E_CLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vc9000e_core",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vc9000e_core_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data csi_phy_parent_data[] = {
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp1" },
+ { .fw_name = "oscin" }
+};
+
+static struct clk_regmap csi_phy0_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = ISP0_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 25,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "csi_phy0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = csi_phy_parent_data,
+ .num_parents = ARRAY_SIZE(csi_phy_parent_data),
+ },
+};
+
+static struct clk_regmap csi_phy0_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ISP0_CLK_CTRL,
+ .shift = 16,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "csi_phy0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &csi_phy0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap csi_phy0 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ISP0_CLK_CTRL,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "csi_phy0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &csi_phy0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data dewarpa_parent_data[] = {
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp1" },
+ { .fw_name = "fdiv7" }
+};
+
+static struct clk_regmap dewarpa_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = DEWARPA_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dewarpa_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = dewarpa_parent_data,
+ .num_parents = ARRAY_SIZE(dewarpa_parent_data),
+ },
+};
+
+static struct clk_regmap dewarpa_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = DEWARPA_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dewarpa_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &dewarpa_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap dewarpa = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = DEWARPA_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "dewarpa",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &dewarpa_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data isp_parent_data[] = {
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp1" },
+ { .fw_name = "oscin" }
+};
+
+static struct clk_regmap isp0_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = ISP0_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "isp0_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = isp_parent_data,
+ .num_parents = ARRAY_SIZE(isp_parent_data),
+ },
+};
+
+static struct clk_regmap isp0_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ISP0_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "isp0_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &isp0_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap isp0 = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = ISP0_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "isp0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &isp0_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data nna_core_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "fdiv2" },
+ { .fw_name = "gp1" },
+ { .fw_name = "hifi" }
+};
+
+static struct clk_regmap nna_core_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = NNA_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "nna_core_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = nna_core_parent_data,
+ .num_parents = ARRAY_SIZE(nna_core_parent_data),
+ },
+};
+
+static struct clk_regmap nna_core_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = NNA_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "nna_core_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &nna_core_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap nna_core = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = NNA_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "nna_core",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &nna_core_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data ge2d_parent_data[] = {
+ { .fw_name = "oscin" },
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "hifi" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .hw = &rtc_clk.hw }
+};
+
+static struct clk_regmap ge2d_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = GE2D_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ge2d_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = ge2d_parent_data,
+ .num_parents = ARRAY_SIZE(ge2d_parent_data),
+ },
+};
+
+static struct clk_regmap ge2d_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = GE2D_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ge2d_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &ge2d_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap ge2d = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = GE2D_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "ge2d",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &ge2d_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct clk_parent_data vapb_parent_data[] = {
+ { .fw_name = "fdiv2p5" },
+ { .fw_name = "fdiv3" },
+ { .fw_name = "fdiv4" },
+ { .fw_name = "fdiv5" },
+ { .fw_name = "gp0" },
+ { .fw_name = "hifi" },
+ { .fw_name = "gp1" },
+ { .fw_name = "oscin" },
+};
+
+static struct clk_regmap vapb_sel = {
+ .data = &(struct clk_regmap_mux_data) {
+ .offset = VAPB_CLK_CTRL,
+ .mask = 0x7,
+ .shift = 9,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vapb_sel",
+ .ops = &clk_regmap_mux_ops,
+ .parent_data = vapb_parent_data,
+ .num_parents = ARRAY_SIZE(vapb_parent_data),
+ },
+};
+
+static struct clk_regmap vapb_div = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = VAPB_CLK_CTRL,
+ .shift = 0,
+ .width = 7,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vapb_div",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vapb_sel.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_regmap vapb = {
+ .data = &(struct clk_regmap_gate_data) {
+ .offset = VAPB_CLK_CTRL,
+ .bit_idx = 8,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vapb",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &vapb_div.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_hw *c3_periphs_hw_clks[] = {
+ [CLKID_RTC_XTAL_CLKIN] = &rtc_xtal_clkin.hw,
+ [CLKID_RTC_32K_DIV] = &rtc_32k_div.hw,
+ [CLKID_RTC_32K_MUX] = &rtc_32k_mux.hw,
+ [CLKID_RTC_32K] = &rtc_32k.hw,
+ [CLKID_RTC_CLK] = &rtc_clk.hw,
+ [CLKID_SYS_RESET_CTRL] = &sys_reset_ctrl.hw,
+ [CLKID_SYS_PWR_CTRL] = &sys_pwr_ctrl.hw,
+ [CLKID_SYS_PAD_CTRL] = &sys_pad_ctrl.hw,
+ [CLKID_SYS_CTRL] = &sys_ctrl.hw,
+ [CLKID_SYS_TS_PLL] = &sys_ts_pll.hw,
+ [CLKID_SYS_DEV_ARB] = &sys_dev_arb.hw,
+ [CLKID_SYS_MMC_PCLK] = &sys_mmc_pclk.hw,
+ [CLKID_SYS_CPU_CTRL] = &sys_cpu_ctrl.hw,
+ [CLKID_SYS_JTAG_CTRL] = &sys_jtag_ctrl.hw,
+ [CLKID_SYS_IR_CTRL] = &sys_ir_ctrl.hw,
+ [CLKID_SYS_IRQ_CTRL] = &sys_irq_ctrl.hw,
+ [CLKID_SYS_MSR_CLK] = &sys_msr_clk.hw,
+ [CLKID_SYS_ROM] = &sys_rom.hw,
+ [CLKID_SYS_UART_F] = &sys_uart_f.hw,
+ [CLKID_SYS_CPU_ARB] = &sys_cpu_apb.hw,
+ [CLKID_SYS_RSA] = &sys_rsa.hw,
+ [CLKID_SYS_SAR_ADC] = &sys_sar_adc.hw,
+ [CLKID_SYS_STARTUP] = &sys_startup.hw,
+ [CLKID_SYS_SECURE] = &sys_secure.hw,
+ [CLKID_SYS_SPIFC] = &sys_spifc.hw,
+ [CLKID_SYS_NNA] = &sys_nna.hw,
+ [CLKID_SYS_ETH_MAC] = &sys_eth_mac.hw,
+ [CLKID_SYS_GIC] = &sys_gic.hw,
+ [CLKID_SYS_RAMA] = &sys_rama.hw,
+ [CLKID_SYS_BIG_NIC] = &sys_big_nic.hw,
+ [CLKID_SYS_RAMB] = &sys_ramb.hw,
+ [CLKID_SYS_AUDIO_PCLK] = &sys_audio_pclk.hw,
+ [CLKID_SYS_PWM_KL] = &sys_pwm_kl.hw,
+ [CLKID_SYS_PWM_IJ] = &sys_pwm_ij.hw,
+ [CLKID_SYS_USB] = &sys_usb.hw,
+ [CLKID_SYS_SD_EMMC_A] = &sys_sd_emmc_a.hw,
+ [CLKID_SYS_SD_EMMC_C] = &sys_sd_emmc_c.hw,
+ [CLKID_SYS_PWM_AB] = &sys_pwm_ab.hw,
+ [CLKID_SYS_PWM_CD] = &sys_pwm_cd.hw,
+ [CLKID_SYS_PWM_EF] = &sys_pwm_ef.hw,
+ [CLKID_SYS_PWM_GH] = &sys_pwm_gh.hw,
+ [CLKID_SYS_SPICC_1] = &sys_spicc_1.hw,
+ [CLKID_SYS_SPICC_0] = &sys_spicc_0.hw,
+ [CLKID_SYS_UART_A] = &sys_uart_a.hw,
+ [CLKID_SYS_UART_B] = &sys_uart_b.hw,
+ [CLKID_SYS_UART_C] = &sys_uart_c.hw,
+ [CLKID_SYS_UART_D] = &sys_uart_d.hw,
+ [CLKID_SYS_UART_E] = &sys_uart_e.hw,
+ [CLKID_SYS_I2C_M_A] = &sys_i2c_m_a.hw,
+ [CLKID_SYS_I2C_M_B] = &sys_i2c_m_b.hw,
+ [CLKID_SYS_I2C_M_C] = &sys_i2c_m_c.hw,
+ [CLKID_SYS_I2C_M_D] = &sys_i2c_m_d.hw,
+ [CLKID_SYS_I2S_S_A] = &sys_i2c_s_a.hw,
+ [CLKID_SYS_RTC] = &sys_rtc.hw,
+ [CLKID_SYS_GE2D] = &sys_ge2d.hw,
+ [CLKID_SYS_ISP] = &sys_isp.hw,
+ [CLKID_SYS_GPV_ISP_NIC] = &sys_gpv_isp_nic.hw,
+ [CLKID_SYS_GPV_CVE_NIC] = &sys_gpv_cve_nic.hw,
+ [CLKID_SYS_MIPI_DSI_HOST] = &sys_mipi_dsi_host.hw,
+ [CLKID_SYS_MIPI_DSI_PHY] = &sys_mipi_dsi_phy.hw,
+ [CLKID_SYS_ETH_PHY] = &sys_eth_phy.hw,
+ [CLKID_SYS_ACODEC] = &sys_acodec.hw,
+ [CLKID_SYS_DWAP] = &sys_dwap.hw,
+ [CLKID_SYS_DOS] = &sys_dos.hw,
+ [CLKID_SYS_CVE] = &sys_cve.hw,
+ [CLKID_SYS_VOUT] = &sys_vout.hw,
+ [CLKID_SYS_VC9000E] = &sys_vc9000e.hw,
+ [CLKID_SYS_PWM_MN] = &sys_pwm_mn.hw,
+ [CLKID_SYS_SD_EMMC_B] = &sys_sd_emmc_b.hw,
+ [CLKID_AXI_SYS_NIC] = &axi_sys_nic.hw,
+ [CLKID_AXI_ISP_NIC] = &axi_isp_nic.hw,
+ [CLKID_AXI_CVE_NIC] = &axi_cve_nic.hw,
+ [CLKID_AXI_RAMB] = &axi_ramb.hw,
+ [CLKID_AXI_RAMA] = &axi_rama.hw,
+ [CLKID_AXI_CPU_DMC] = &axi_cpu_dmc.hw,
+ [CLKID_AXI_NIC] = &axi_nic.hw,
+ [CLKID_AXI_DMA] = &axi_dma.hw,
+ [CLKID_AXI_MUX_NIC] = &axi_mux_nic.hw,
+ [CLKID_AXI_CVE] = &axi_cve.hw,
+ [CLKID_AXI_DEV1_DMC] = &axi_dev1_dmc.hw,
+ [CLKID_AXI_DEV0_DMC] = &axi_dev0_dmc.hw,
+ [CLKID_AXI_DSP_DMC] = &axi_dsp_dmc.hw,
+ [CLKID_12_24M_IN] = &clk_12_24m_in.hw,
+ [CLKID_12M_24M] = &clk_12_24m.hw,
+ [CLKID_FCLK_25M_DIV] = &fclk_25m_div.hw,
+ [CLKID_FCLK_25M] = &fclk_25m.hw,
+ [CLKID_GEN_SEL] = &gen_sel.hw,
+ [CLKID_GEN_DIV] = &gen_div.hw,
+ [CLKID_GEN] = &gen.hw,
+ [CLKID_SARADC_SEL] = &saradc_sel.hw,
+ [CLKID_SARADC_DIV] = &saradc_div.hw,
+ [CLKID_SARADC] = &saradc.hw,
+ [CLKID_PWM_A_SEL] = &pwm_a_sel.hw,
+ [CLKID_PWM_A_DIV] = &pwm_a_div.hw,
+ [CLKID_PWM_A] = &pwm_a.hw,
+ [CLKID_PWM_B_SEL] = &pwm_b_sel.hw,
+ [CLKID_PWM_B_DIV] = &pwm_b_div.hw,
+ [CLKID_PWM_B] = &pwm_b.hw,
+ [CLKID_PWM_C_SEL] = &pwm_c_sel.hw,
+ [CLKID_PWM_C_DIV] = &pwm_c_div.hw,
+ [CLKID_PWM_C] = &pwm_c.hw,
+ [CLKID_PWM_D_SEL] = &pwm_d_sel.hw,
+ [CLKID_PWM_D_DIV] = &pwm_d_div.hw,
+ [CLKID_PWM_D] = &pwm_d.hw,
+ [CLKID_PWM_E_SEL] = &pwm_e_sel.hw,
+ [CLKID_PWM_E_DIV] = &pwm_e_div.hw,
+ [CLKID_PWM_E] = &pwm_e.hw,
+ [CLKID_PWM_F_SEL] = &pwm_f_sel.hw,
+ [CLKID_PWM_F_DIV] = &pwm_f_div.hw,
+ [CLKID_PWM_F] = &pwm_f.hw,
+ [CLKID_PWM_G_SEL] = &pwm_g_sel.hw,
+ [CLKID_PWM_G_DIV] = &pwm_g_div.hw,
+ [CLKID_PWM_G] = &pwm_g.hw,
+ [CLKID_PWM_H_SEL] = &pwm_h_sel.hw,
+ [CLKID_PWM_H_DIV] = &pwm_h_div.hw,
+ [CLKID_PWM_H] = &pwm_h.hw,
+ [CLKID_PWM_I_SEL] = &pwm_i_sel.hw,
+ [CLKID_PWM_I_DIV] = &pwm_i_div.hw,
+ [CLKID_PWM_I] = &pwm_i.hw,
+ [CLKID_PWM_J_SEL] = &pwm_j_sel.hw,
+ [CLKID_PWM_J_DIV] = &pwm_j_div.hw,
+ [CLKID_PWM_J] = &pwm_j.hw,
+ [CLKID_PWM_K_SEL] = &pwm_k_sel.hw,
+ [CLKID_PWM_K_DIV] = &pwm_k_div.hw,
+ [CLKID_PWM_K] = &pwm_k.hw,
+ [CLKID_PWM_L_SEL] = &pwm_l_sel.hw,
+ [CLKID_PWM_L_DIV] = &pwm_l_div.hw,
+ [CLKID_PWM_L] = &pwm_l.hw,
+ [CLKID_PWM_M_SEL] = &pwm_m_sel.hw,
+ [CLKID_PWM_M_DIV] = &pwm_m_div.hw,
+ [CLKID_PWM_M] = &pwm_m.hw,
+ [CLKID_PWM_N_SEL] = &pwm_n_sel.hw,
+ [CLKID_PWM_N_DIV] = &pwm_n_div.hw,
+ [CLKID_PWM_N] = &pwm_n.hw,
+ [CLKID_SPICC_A_SEL] = &spicc_a_sel.hw,
+ [CLKID_SPICC_A_DIV] = &spicc_a_div.hw,
+ [CLKID_SPICC_A] = &spicc_a.hw,
+ [CLKID_SPICC_B_SEL] = &spicc_b_sel.hw,
+ [CLKID_SPICC_B_DIV] = &spicc_b_div.hw,
+ [CLKID_SPICC_B] = &spicc_b.hw,
+ [CLKID_SPIFC_SEL] = &spifc_sel.hw,
+ [CLKID_SPIFC_DIV] = &spifc_div.hw,
+ [CLKID_SPIFC] = &spifc.hw,
+ [CLKID_SD_EMMC_A_SEL] = &sd_emmc_a_sel.hw,
+ [CLKID_SD_EMMC_A_DIV] = &sd_emmc_a_div.hw,
+ [CLKID_SD_EMMC_A] = &sd_emmc_a.hw,
+ [CLKID_SD_EMMC_B_SEL] = &sd_emmc_b_sel.hw,
+ [CLKID_SD_EMMC_B_DIV] = &sd_emmc_b_div.hw,
+ [CLKID_SD_EMMC_B] = &sd_emmc_b.hw,
+ [CLKID_SD_EMMC_C_SEL] = &sd_emmc_c_sel.hw,
+ [CLKID_SD_EMMC_C_DIV] = &sd_emmc_c_div.hw,
+ [CLKID_SD_EMMC_C] = &sd_emmc_c.hw,
+ [CLKID_TS_DIV] = &ts_div.hw,
+ [CLKID_TS] = &ts.hw,
+ [CLKID_ETH_125M_DIV] = &eth_125m_div.hw,
+ [CLKID_ETH_125M] = &eth_125m.hw,
+ [CLKID_ETH_RMII_DIV] = &eth_rmii_div.hw,
+ [CLKID_ETH_RMII] = &eth_rmii.hw,
+ [CLKID_MIPI_DSI_MEAS_SEL] = &mipi_dsi_meas_sel.hw,
+ [CLKID_MIPI_DSI_MEAS_DIV] = &mipi_dsi_meas_div.hw,
+ [CLKID_MIPI_DSI_MEAS] = &mipi_dsi_meas.hw,
+ [CLKID_DSI_PHY_SEL] = &dsi_phy_sel.hw,
+ [CLKID_DSI_PHY_DIV] = &dsi_phy_div.hw,
+ [CLKID_DSI_PHY] = &dsi_phy.hw,
+ [CLKID_VOUT_MCLK_SEL] = &vout_mclk_sel.hw,
+ [CLKID_VOUT_MCLK_DIV] = &vout_mclk_div.hw,
+ [CLKID_VOUT_MCLK] = &vout_mclk.hw,
+ [CLKID_VOUT_ENC_SEL] = &vout_enc_sel.hw,
+ [CLKID_VOUT_ENC_DIV] = &vout_enc_div.hw,
+ [CLKID_VOUT_ENC] = &vout_enc.hw,
+ [CLKID_HCODEC_0_SEL] = &hcodec_0_sel.hw,
+ [CLKID_HCODEC_0_DIV] = &hcodec_0_div.hw,
+ [CLKID_HCODEC_0] = &hcodec_0.hw,
+ [CLKID_HCODEC_1_SEL] = &hcodec_1_sel.hw,
+ [CLKID_HCODEC_1_DIV] = &hcodec_1_div.hw,
+ [CLKID_HCODEC_1] = &hcodec_1.hw,
+ [CLKID_HCODEC] = &hcodec.hw,
+ [CLKID_VC9000E_ACLK_SEL] = &vc9000e_aclk_sel.hw,
+ [CLKID_VC9000E_ACLK_DIV] = &vc9000e_aclk_div.hw,
+ [CLKID_VC9000E_ACLK] = &vc9000e_aclk.hw,
+ [CLKID_VC9000E_CORE_SEL] = &vc9000e_core_sel.hw,
+ [CLKID_VC9000E_CORE_DIV] = &vc9000e_core_div.hw,
+ [CLKID_VC9000E_CORE] = &vc9000e_core.hw,
+ [CLKID_CSI_PHY0_SEL] = &csi_phy0_sel.hw,
+ [CLKID_CSI_PHY0_DIV] = &csi_phy0_div.hw,
+ [CLKID_CSI_PHY0] = &csi_phy0.hw,
+ [CLKID_DEWARPA_SEL] = &dewarpa_sel.hw,
+ [CLKID_DEWARPA_DIV] = &dewarpa_div.hw,
+ [CLKID_DEWARPA] = &dewarpa.hw,
+ [CLKID_ISP0_SEL] = &isp0_sel.hw,
+ [CLKID_ISP0_DIV] = &isp0_div.hw,
+ [CLKID_ISP0] = &isp0.hw,
+ [CLKID_NNA_CORE_SEL] = &nna_core_sel.hw,
+ [CLKID_NNA_CORE_DIV] = &nna_core_div.hw,
+ [CLKID_NNA_CORE] = &nna_core.hw,
+ [CLKID_GE2D_SEL] = &ge2d_sel.hw,
+ [CLKID_GE2D_DIV] = &ge2d_div.hw,
+ [CLKID_GE2D] = &ge2d.hw,
+ [CLKID_VAPB_SEL] = &vapb_sel.hw,
+ [CLKID_VAPB_DIV] = &vapb_div.hw,
+ [CLKID_VAPB] = &vapb.hw,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const c3_periphs_clk_regmaps[] = {
+ &rtc_xtal_clkin,
+ &rtc_32k_div,
+ &rtc_32k_mux,
+ &rtc_32k,
+ &rtc_clk,
+ &sys_reset_ctrl,
+ &sys_pwr_ctrl,
+ &sys_pad_ctrl,
+ &sys_ctrl,
+ &sys_ts_pll,
+ &sys_dev_arb,
+ &sys_mmc_pclk,
+ &sys_cpu_ctrl,
+ &sys_jtag_ctrl,
+ &sys_ir_ctrl,
+ &sys_irq_ctrl,
+ &sys_msr_clk,
+ &sys_rom,
+ &sys_uart_f,
+ &sys_cpu_apb,
+ &sys_rsa,
+ &sys_sar_adc,
+ &sys_startup,
+ &sys_secure,
+ &sys_spifc,
+ &sys_nna,
+ &sys_eth_mac,
+ &sys_gic,
+ &sys_rama,
+ &sys_big_nic,
+ &sys_ramb,
+ &sys_audio_pclk,
+ &sys_pwm_kl,
+ &sys_pwm_ij,
+ &sys_usb,
+ &sys_sd_emmc_a,
+ &sys_sd_emmc_c,
+ &sys_pwm_ab,
+ &sys_pwm_cd,
+ &sys_pwm_ef,
+ &sys_pwm_gh,
+ &sys_spicc_1,
+ &sys_spicc_0,
+ &sys_uart_a,
+ &sys_uart_b,
+ &sys_uart_c,
+ &sys_uart_d,
+ &sys_uart_e,
+ &sys_i2c_m_a,
+ &sys_i2c_m_b,
+ &sys_i2c_m_c,
+ &sys_i2c_m_d,
+ &sys_i2c_s_a,
+ &sys_rtc,
+ &sys_ge2d,
+ &sys_isp,
+ &sys_gpv_isp_nic,
+ &sys_gpv_cve_nic,
+ &sys_mipi_dsi_host,
+ &sys_mipi_dsi_phy,
+ &sys_eth_phy,
+ &sys_acodec,
+ &sys_dwap,
+ &sys_dos,
+ &sys_cve,
+ &sys_vout,
+ &sys_vc9000e,
+ &sys_pwm_mn,
+ &sys_sd_emmc_b,
+ &axi_sys_nic,
+ &axi_isp_nic,
+ &axi_cve_nic,
+ &axi_ramb,
+ &axi_rama,
+ &axi_cpu_dmc,
+ &axi_nic,
+ &axi_dma,
+ &axi_mux_nic,
+ &axi_cve,
+ &axi_dev1_dmc,
+ &axi_dev0_dmc,
+ &axi_dsp_dmc,
+ &clk_12_24m_in,
+ &clk_12_24m,
+ &fclk_25m_div,
+ &fclk_25m,
+ &gen_sel,
+ &gen_div,
+ &gen,
+ &saradc_sel,
+ &saradc_div,
+ &saradc,
+ &pwm_a_sel,
+ &pwm_a_div,
+ &pwm_a,
+ &pwm_b_sel,
+ &pwm_b_div,
+ &pwm_b,
+ &pwm_c_sel,
+ &pwm_c_div,
+ &pwm_c,
+ &pwm_d_sel,
+ &pwm_d_div,
+ &pwm_d,
+ &pwm_e_sel,
+ &pwm_e_div,
+ &pwm_e,
+ &pwm_f_sel,
+ &pwm_f_div,
+ &pwm_f,
+ &pwm_g_sel,
+ &pwm_g_div,
+ &pwm_g,
+ &pwm_h_sel,
+ &pwm_h_div,
+ &pwm_h,
+ &pwm_i_sel,
+ &pwm_i_div,
+ &pwm_i,
+ &pwm_j_sel,
+ &pwm_j_div,
+ &pwm_j,
+ &pwm_k_sel,
+ &pwm_k_div,
+ &pwm_k,
+ &pwm_l_sel,
+ &pwm_l_div,
+ &pwm_l,
+ &pwm_m_sel,
+ &pwm_m_div,
+ &pwm_m,
+ &pwm_n_sel,
+ &pwm_n_div,
+ &pwm_n,
+ &spicc_a_sel,
+ &spicc_a_div,
+ &spicc_a,
+ &spicc_b_sel,
+ &spicc_b_div,
+ &spicc_b,
+ &spifc_sel,
+ &spifc_div,
+ &spifc,
+ &sd_emmc_a_sel,
+ &sd_emmc_a_div,
+ &sd_emmc_a,
+ &sd_emmc_b_sel,
+ &sd_emmc_b_div,
+ &sd_emmc_b,
+ &sd_emmc_c_sel,
+ &sd_emmc_c_div,
+ &sd_emmc_c,
+ &ts_div,
+ &ts,
+ &eth_125m,
+ &eth_rmii_div,
+ &eth_rmii,
+ &mipi_dsi_meas_sel,
+ &mipi_dsi_meas_div,
+ &mipi_dsi_meas,
+ &dsi_phy_sel,
+ &dsi_phy_div,
+ &dsi_phy,
+ &vout_mclk_sel,
+ &vout_mclk_div,
+ &vout_mclk,
+ &vout_enc_sel,
+ &vout_enc_div,
+ &vout_enc,
+ &hcodec_0_sel,
+ &hcodec_0_div,
+ &hcodec_0,
+ &hcodec_1_sel,
+ &hcodec_1_div,
+ &hcodec_1,
+ &hcodec,
+ &vc9000e_aclk_sel,
+ &vc9000e_aclk_div,
+ &vc9000e_aclk,
+ &vc9000e_core_sel,
+ &vc9000e_core_div,
+ &vc9000e_core,
+ &csi_phy0_sel,
+ &csi_phy0_div,
+ &csi_phy0,
+ &dewarpa_sel,
+ &dewarpa_div,
+ &dewarpa,
+ &isp0_sel,
+ &isp0_div,
+ &isp0,
+ &nna_core_sel,
+ &nna_core_div,
+ &nna_core,
+ &ge2d_sel,
+ &ge2d_div,
+ &ge2d,
+ &vapb_sel,
+ &vapb_div,
+ &vapb,
+};
+
+static struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = NNA_CLK_CTRL,
+};
+
+static struct meson_clk_hw_data c3_periphs_clks = {
+ .hws = c3_periphs_hw_clks,
+ .num = ARRAY_SIZE(c3_periphs_hw_clks),
+};
+
+static int aml_c3_peripherals_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ void __iomem *base;
+ int clkid, ret, i;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < ARRAY_SIZE(c3_periphs_clk_regmaps); i++)
+ c3_periphs_clk_regmaps[i]->map = regmap;
+
+ for (clkid = 0; clkid < c3_periphs_clks.num; clkid++) {
+ /* array might be sparse */
+ if (!c3_periphs_clks.hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev, c3_periphs_clks.hws[clkid]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
+ &c3_periphs_clks);
+}
+
+static const struct of_device_id c3_peripherals_clkc_match_table[] = {
+ {
+ .compatible = "amlogic,c3-peripherals-clkc",
+ },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, c3_peripherals_clkc_match_table);
+
+static struct platform_driver c3_peripherals_driver = {
+ .probe = aml_c3_peripherals_probe,
+ .driver = {
+ .name = "c3-peripherals-clkc",
+ .of_match_table = c3_peripherals_clkc_match_table,
+ },
+};
+
+module_platform_driver(c3_peripherals_driver);
+MODULE_AUTHOR("Chuan Liu <chuan.liu@amlogic.com>");
+MODULE_LICENSE("GPL");
--
2.39.2
Re: [PATCH v7 5/5] clk: meson: c3: add c3 clock peripherals controller driver [ In reply to ]
On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
> Add the C3 peripherals clock controller driver in the C3 SoC family.
>
> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
> ---
> drivers/clk/meson/Kconfig | 15 +
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
> 3 files changed, 2382 insertions(+)
> create mode 100644 drivers/clk/meson/c3-peripherals.c
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 9f975a980581..0b85d584910e 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
> AKA C3. Say Y if you want the board to work, because PLLs are the parent
> of most peripherals.
>
> +config COMMON_CLK_C3_PERIPHERALS
> + tristate "Amlogic C3 peripherals clock controller"
> + depends on ARM64
> + depends on ARM_SCMI_PROTOCOL

I may have missed it, but I don't see the dependency on SCMI in this
driver.

> + depends on COMMON_CLK_SCMI
> + depends on COMMON_CLK_C3_PLL
> + default y
> + select COMMON_CLK_MESON_REGMAP
> + select COMMON_CLK_MESON_DUALDIV
> + select COMMON_CLK_MESON_CLKC_UTILS
> + help
> + Support for the Peripherals clock controller on Amlogic C302X and
> + C308L devices, AKA C3. Say Y if you want the peripherals clock to
> + work.
> +
> config COMMON_CLK_G12A
> tristate "G12 and SM1 SoC clock controllers support"
> depends on ARM64
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 4420af628b31..20ad9482c892 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
> obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
> new file mode 100644
> index 000000000000..0f834ced0ee9
> --- /dev/null
> +++ b/drivers/clk/meson/c3-peripherals.c
> @@ -0,0 +1,2366 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Amlogic C3 Peripherals Clock Controller Driver
> + *
> + * Copyright (c) 2023 Amlogic, inc.
> + * Author: Chuan Liu <chuan.liu@amlogic.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_device.h>

I don't think you need this header.

> +#include <linux/platform_device.h>
> +#include "clk-regmap.h"
> +#include "clk-dualdiv.h"
> +#include "meson-clkc-utils.h"
> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
Re: [PATCH v7 5/5] clk: meson: c3: add c3 clock peripherals controller driver [ In reply to ]
Hi Rob,
Thanks for your review.

On 2024/4/25 04:01, Rob Herring wrote:
> [ EXTERNAL EMAIL ]
>
> On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
>> Add the C3 peripherals clock controller driver in the C3 SoC family.
>>
>> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> drivers/clk/meson/Kconfig | 15 +
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>> 3 files changed, 2382 insertions(+)
>> create mode 100644 drivers/clk/meson/c3-peripherals.c
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 9f975a980581..0b85d584910e 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>> AKA C3. Say Y if you want the board to work, because PLLs are the parent
>> of most peripherals.
>>
>> +config COMMON_CLK_C3_PERIPHERALS
>> + tristate "Amlogic C3 peripherals clock controller"
>> + depends on ARM64
>> + depends on ARM_SCMI_PROTOCOL
>
> I may have missed it, but I don't see the dependency on SCMI in this
> driver.
>

Some clock sources for peripherals controller from SCMI module.
In previous version, Jerome suggest us the clock that relevant
registers can only be accessed securely is implemented through SCMI.

>> + depends on COMMON_CLK_SCMI
>> + depends on COMMON_CLK_C3_PLL
>> + default y
>> + select COMMON_CLK_MESON_REGMAP
>> + select COMMON_CLK_MESON_DUALDIV
>> + select COMMON_CLK_MESON_CLKC_UTILS
>> + help
>> + Support for the Peripherals clock controller on Amlogic C302X and
>> + C308L devices, AKA C3. Say Y if you want the peripherals clock to
>> + work.
>> +
>> config COMMON_CLK_G12A
>> tristate "G12 and SM1 SoC clock controllers support"
>> depends on ARM64
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 4420af628b31..20ad9482c892 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>> obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
>> new file mode 100644
>> index 000000000000..0f834ced0ee9
>> --- /dev/null
>> +++ b/drivers/clk/meson/c3-peripherals.c
>> @@ -0,0 +1,2366 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Amlogic C3 Peripherals Clock Controller Driver
>> + *
>> + * Copyright (c) 2023 Amlogic, inc.
>> + * Author: Chuan Liu <chuan.liu@amlogic.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/of_device.h>
>
> I don't think you need this header.
>

Yes, I will fix it with c3-pll.c.

>> +#include <linux/platform_device.h>
>> +#include "clk-regmap.h"
>> +#include "clk-dualdiv.h"
>> +#include "meson-clkc-utils.h"
>> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
Re: [PATCH v7 5/5] clk: meson: c3: add c3 clock peripherals controller driver [ In reply to ]
On Thu 25 Apr 2024 at 14:28, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:

> Hi Rob,
> Thanks for your review.
>
> On 2024/4/25 04:01, Rob Herring wrote:
>> [ EXTERNAL EMAIL ]
>> On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
>>> Add the C3 peripherals clock controller driver in the C3 SoC family.
>>>
>>> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
>>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>> ---
>>> drivers/clk/meson/Kconfig | 15 +
>>> drivers/clk/meson/Makefile | 1 +
>>> drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>>> 3 files changed, 2382 insertions(+)
>>> create mode 100644 drivers/clk/meson/c3-peripherals.c
>>>
>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>> index 9f975a980581..0b85d584910e 100644
>>> --- a/drivers/clk/meson/Kconfig
>>> +++ b/drivers/clk/meson/Kconfig
>>> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>>> AKA C3. Say Y if you want the board to work, because PLLs are the parent
>>> of most peripherals.
>>>
>>> +config COMMON_CLK_C3_PERIPHERALS
>>> + tristate "Amlogic C3 peripherals clock controller"
>>> + depends on ARM64
>>> + depends on ARM_SCMI_PROTOCOL
>> I may have missed it, but I don't see the dependency on SCMI in this
>> driver.
>>
>
> Some clock sources for peripherals controller from SCMI module.
> In previous version, Jerome suggest us the clock that relevant registers
> can only be accessed securely is implemented through SCMI.
>

There is no dependency but you are guranteed to have have problem if
SCMI is missing because it provides several inputs to this controller.

IMO, this controller should 'imply ARM_SCMI_PROTOCOL'

You have already posted a v8 without it.
I expect a fix up change on top of v8 if there is no other comment on
this v8 version. Part of v9 otherwise.

>>> + depends on COMMON_CLK_SCMI
>>> + depends on COMMON_CLK_C3_PLL
>>> + default y
>>> + select COMMON_CLK_MESON_REGMAP
>>> + select COMMON_CLK_MESON_DUALDIV
>>> + select COMMON_CLK_MESON_CLKC_UTILS
>>> + help
>>> + Support for the Peripherals clock controller on Amlogic C302X and
>>> + C308L devices, AKA C3. Say Y if you want the peripherals clock to
>>> + work.
>>> +
>>> config COMMON_CLK_G12A
>>> tristate "G12 and SM1 SoC clock controllers support"
>>> depends on ARM64
>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>> index 4420af628b31..20ad9482c892 100644
>>> --- a/drivers/clk/meson/Makefile
>>> +++ b/drivers/clk/meson/Makefile
>>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>> obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>>> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>>> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
>>> new file mode 100644
>>> index 000000000000..0f834ced0ee9
>>> --- /dev/null
>>> +++ b/drivers/clk/meson/c3-peripherals.c
>>> @@ -0,0 +1,2366 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Amlogic C3 Peripherals Clock Controller Driver
>>> + *
>>> + * Copyright (c) 2023 Amlogic, inc.
>>> + * Author: Chuan Liu <chuan.liu@amlogic.com>
>>> + */
>>> +
>>> +#include <linux/clk-provider.h>
>>> +#include <linux/of_device.h>
>> I don't think you need this header.
>>
>
> Yes, I will fix it with c3-pll.c.
>
>>> +#include <linux/platform_device.h>
>>> +#include "clk-regmap.h"
>>> +#include "clk-dualdiv.h"
>>> +#include "meson-clkc-utils.h"
>>> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>


--
Jerome
Re: [PATCH v7 5/5] clk: meson: c3: add c3 clock peripherals controller driver [ In reply to ]
On Fri 03 May 2024 at 14:16, Jerome Brunet <jbrunet@baylibre.com> wrote:

> On Thu 25 Apr 2024 at 14:28, Xianwei Zhao <xianwei.zhao@amlogic.com> wrote:
>
>> Hi Rob,
>> Thanks for your review.
>>
>> On 2024/4/25 04:01, Rob Herring wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Wed, Apr 24, 2024 at 01:09:28PM +0800, Xianwei Zhao wrote:
>>>> Add the C3 peripherals clock controller driver in the C3 SoC family.
>>>>
>>>> Co-developed-by: Chuan Liu <chuan.liu@amlogic.com>
>>>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>> ---
>>>> drivers/clk/meson/Kconfig | 15 +
>>>> drivers/clk/meson/Makefile | 1 +
>>>> drivers/clk/meson/c3-peripherals.c | 2366 ++++++++++++++++++++++++++++
>>>> 3 files changed, 2382 insertions(+)
>>>> create mode 100644 drivers/clk/meson/c3-peripherals.c
>>>>
>>>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>>>> index 9f975a980581..0b85d584910e 100644
>>>> --- a/drivers/clk/meson/Kconfig
>>>> +++ b/drivers/clk/meson/Kconfig
>>>> @@ -142,6 +142,21 @@ config COMMON_CLK_C3_PLL
>>>> AKA C3. Say Y if you want the board to work, because PLLs are the parent
>>>> of most peripherals.
>>>>
>>>> +config COMMON_CLK_C3_PERIPHERALS
>>>> + tristate "Amlogic C3 peripherals clock controller"
>>>> + depends on ARM64
>>>> + depends on ARM_SCMI_PROTOCOL
>>> I may have missed it, but I don't see the dependency on SCMI in this
>>> driver.
>>>
>>
>> Some clock sources for peripherals controller from SCMI module.
>> In previous version, Jerome suggest us the clock that relevant registers
>> can only be accessed securely is implemented through SCMI.
>>
>
> There is no dependency but you are guranteed to have have problem if
> SCMI is missing because it provides several inputs to this controller.
>
> IMO, this controller should 'imply ARM_SCMI_PROTOCOL'
>
> You have already posted a v8 without it.
> I expect a fix up change on top of v8 if there is no other comment on
> this v8 version. Part of v9 otherwise.
>
>>>> + depends on COMMON_CLK_SCMI
>>>> + depends on COMMON_CLK_C3_PLL

Same here - imply, not depends

>>>> + default y
>>>> + select COMMON_CLK_MESON_REGMAP
>>>> + select COMMON_CLK_MESON_DUALDIV
>>>> + select COMMON_CLK_MESON_CLKC_UTILS
>>>> + help
>>>> + Support for the Peripherals clock controller on Amlogic C302X and
>>>> + C308L devices, AKA C3. Say Y if you want the peripherals clock to
>>>> + work.
>>>> +
>>>> config COMMON_CLK_G12A
>>>> tristate "G12 and SM1 SoC clock controllers support"
>>>> depends on ARM64
>>>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>>>> index 4420af628b31..20ad9482c892 100644
>>>> --- a/drivers/clk/meson/Makefile
>>>> +++ b/drivers/clk/meson/Makefile
>>>> @@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>>>> obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>>>> obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>>>> obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>>>> +obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>>>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>>>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>>>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>>>> diff --git a/drivers/clk/meson/c3-peripherals.c b/drivers/clk/meson/c3-peripherals.c
>>>> new file mode 100644
>>>> index 000000000000..0f834ced0ee9
>>>> --- /dev/null
>>>> +++ b/drivers/clk/meson/c3-peripherals.c
>>>> @@ -0,0 +1,2366 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Amlogic C3 Peripherals Clock Controller Driver
>>>> + *
>>>> + * Copyright (c) 2023 Amlogic, inc.
>>>> + * Author: Chuan Liu <chuan.liu@amlogic.com>
>>>> + */
>>>> +
>>>> +#include <linux/clk-provider.h>
>>>> +#include <linux/of_device.h>
>>> I don't think you need this header.
>>>
>>
>> Yes, I will fix it with c3-pll.c.
>>
>>>> +#include <linux/platform_device.h>
>>>> +#include "clk-regmap.h"
>>>> +#include "clk-dualdiv.h"
>>>> +#include "meson-clkc-utils.h"
>>>> +#include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>


--
Jerome