Some functions were consolidated in the SM4450 pinctrl driver, but they
had not been updated in the binding file before the previous SM4450
pinctrl patch series was merged.
Update functions in this binding file to match with SM4450 pinctrl
driver. Some functions need to be consolidated and some functions need
to be removed.
The following functions are removed:
- atest_char0, atest_char1, atest_char2, atest_char3
- atest_usb00, atest_usb01, atest_usb02, atest_usb03
- audio_ref
- cci_async
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3
- coex_uart1
- cri_trng0, cri_trng1
- dbg_out
- ddr_pxi0, ddr_pxi1
- dp0_hot
- gcc_gp1, gcc_gp2, gcc_gp3
- ibi_i3c
- jitter_bist
- mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3
- mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0,
mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1
- nav_gpio0, nav_gpio1, nav_gpio2
- phase_flag0, phase_flag1, phase_flag10, phase_flag11, phase_flag12,
phase_flag13, phase_flag14, phase_flag15, phase_flag16,
phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
phase_flag21, phase_flag22, phase_flag23, phase_flag24,
phase_flag25, phase_flag26, phase_flag27, phase_flag28,
phase_flag29, phase_flag3, phase_flag30, phase_flag31, phase_flag4,
phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9
- pll_bist, pll_clk
- prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3
- qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12,
qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3,
qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
qdss_gpio9
- qlink0_wmss
- qup0_se5, qup0_se6, qup0_se7, qup1_se5, qup1_se6
- sd_write
- tb_trig
- tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3
- tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3
- tsense_pwm1, tsense_pwm2
- uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
uim1_present, uim1_reset
- usb0_hs, usb0_phy
- vsense_trigger
The following functions are added:
- atest_char
- atest_usb0
- audio_ref_clk
- cci
- cci_async_in0
- cmu_rng
- coex_uart1_rx, coex_uart1_tx
- dbg_out_clk
- ddr_pxi0_test, ddr_pxi1_test
- gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk
- ibi_i3c_qup0, ibi_i3c_qup1
- jitter_bist_ref
- mdp_vsync
- nav
- phase_flag
- pll_bist_sync, pll_clk_aux
- prng_rosc
- qlink0_wmss_reset
- sd_write_protect
- tb_trig_sdc1, tb_trig_sdc2
- tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, tgu_ch3_trigout
- tmess_prng
- tsense_pwm1_out, tsense_pwm2_out
- uim0, uim1
- usb0_hs_ac, usb0_phy_ps
- vsense_trigger_mirnat
- wlan1_adc_dtest0, wlan1_adc_dtest1
Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
.../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 52 +++++++------------
1 file changed, 18 insertions(+), 34 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8ec220..1b941b276b3f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -72,40 +72,24 @@ $defs:
description:
Specify the alternative function to be configured for the specified
pins.
- enum: [. gpio, atest_char, atest_char0, atest_char1, atest_char2,
- atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
- atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
- jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
- mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
- mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
- phase_flag0, phase_flag1, phase_flag10, phase_flag11,
- phase_flag12, phase_flag13, phase_flag14, phase_flag15,
- phase_flag16, phase_flag17, phase_flag18, phase_flag19,
- phase_flag2, phase_flag20, phase_flag21, phase_flag22,
- phase_flag23, phase_flag24, phase_flag25, phase_flag26,
- phase_flag27, phase_flag28, phase_flag29, phase_flag3,
- phase_flag30, phase_flag31, phase_flag4, phase_flag5,
- phase_flag6, phase_flag7, phase_flag8, phase_flag9,
- pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
- prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
- qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
- qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
- qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
- qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
- qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
- qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
- qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
- qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
- tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
- tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
- uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
- uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
- vsense_trigger ]
+ enum: [. gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+ cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+ coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+ ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+ gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+ jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+ mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+ pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+ qlink0_enable, qlink0_request, qlink0_wmss_reset,
+ qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+ qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+ tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+ vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+ wlan1_adc_dtest0, wlan1_adc_dtest1 ]
required:
- pins
--
2.17.1
had not been updated in the binding file before the previous SM4450
pinctrl patch series was merged.
Update functions in this binding file to match with SM4450 pinctrl
driver. Some functions need to be consolidated and some functions need
to be removed.
The following functions are removed:
- atest_char0, atest_char1, atest_char2, atest_char3
- atest_usb00, atest_usb01, atest_usb02, atest_usb03
- audio_ref
- cci_async
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3
- coex_uart1
- cri_trng0, cri_trng1
- dbg_out
- ddr_pxi0, ddr_pxi1
- dp0_hot
- gcc_gp1, gcc_gp2, gcc_gp3
- ibi_i3c
- jitter_bist
- mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3
- mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0,
mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1
- nav_gpio0, nav_gpio1, nav_gpio2
- phase_flag0, phase_flag1, phase_flag10, phase_flag11, phase_flag12,
phase_flag13, phase_flag14, phase_flag15, phase_flag16,
phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
phase_flag21, phase_flag22, phase_flag23, phase_flag24,
phase_flag25, phase_flag26, phase_flag27, phase_flag28,
phase_flag29, phase_flag3, phase_flag30, phase_flag31, phase_flag4,
phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9
- pll_bist, pll_clk
- prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3
- qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12,
qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3,
qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8,
qdss_gpio9
- qlink0_wmss
- qup0_se5, qup0_se6, qup0_se7, qup1_se5, qup1_se6
- sd_write
- tb_trig
- tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3
- tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3
- tsense_pwm1, tsense_pwm2
- uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
uim1_present, uim1_reset
- usb0_hs, usb0_phy
- vsense_trigger
The following functions are added:
- atest_char
- atest_usb0
- audio_ref_clk
- cci
- cci_async_in0
- cmu_rng
- coex_uart1_rx, coex_uart1_tx
- dbg_out_clk
- ddr_pxi0_test, ddr_pxi1_test
- gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk
- ibi_i3c_qup0, ibi_i3c_qup1
- jitter_bist_ref
- mdp_vsync
- nav
- phase_flag
- pll_bist_sync, pll_clk_aux
- prng_rosc
- qlink0_wmss_reset
- sd_write_protect
- tb_trig_sdc1, tb_trig_sdc2
- tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, tgu_ch3_trigout
- tmess_prng
- tsense_pwm1_out, tsense_pwm2_out
- uim0, uim1
- usb0_hs_ac, usb0_phy_ps
- vsense_trigger_mirnat
- wlan1_adc_dtest0, wlan1_adc_dtest1
Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
.../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 52 +++++++------------
1 file changed, 18 insertions(+), 34 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8ec220..1b941b276b3f 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -72,40 +72,24 @@ $defs:
description:
Specify the alternative function to be configured for the specified
pins.
- enum: [. gpio, atest_char, atest_char0, atest_char1, atest_char2,
- atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
- atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
- jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
- mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
- mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
- phase_flag0, phase_flag1, phase_flag10, phase_flag11,
- phase_flag12, phase_flag13, phase_flag14, phase_flag15,
- phase_flag16, phase_flag17, phase_flag18, phase_flag19,
- phase_flag2, phase_flag20, phase_flag21, phase_flag22,
- phase_flag23, phase_flag24, phase_flag25, phase_flag26,
- phase_flag27, phase_flag28, phase_flag29, phase_flag3,
- phase_flag30, phase_flag31, phase_flag4, phase_flag5,
- phase_flag6, phase_flag7, phase_flag8, phase_flag9,
- pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
- prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
- qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
- qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
- qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
- qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
- qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
- qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
- qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
- qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
- tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
- tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
- uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
- uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
- vsense_trigger ]
+ enum: [. gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+ cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+ coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+ ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+ gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+ jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+ mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+ pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+ qlink0_enable, qlink0_request, qlink0_wmss_reset,
+ qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+ qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+ tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+ vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+ wlan1_adc_dtest0, wlan1_adc_dtest1 ]
required:
- pins
--
2.17.1