Mailing List Archive

[PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

This patch series adds support for sleep-moci to the Verdin AM62 in
combination with the Dahlia carrier board. sleep-moci is a GPIO that
allows the system on module to turn off regulators that are not needed
in suspend mode on the carrier board.

Commit ba9d3cd71f15 ("dt-bindings: usb: microchip,usb5744: Remove
peer-hub as requirement") from linux-next is needed to make DTB_CHECK
pass without peer-hub set for the hub on the usb1 interface.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>

Stefan Eichenberger (2):
arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci

.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 22 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 24 ++++++++++++-------
2 files changed, 38 insertions(+), 8 deletions(-)

--
2.40.1
Re: [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support [ In reply to ]
Hello Nishanth,

On Fri, Mar 01, 2024 at 09:48:59AM +0100, Stefan Eichenberger wrote:
> From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
>
> This patch series adds support for sleep-moci to the Verdin AM62 in
> combination with the Dahlia carrier board. sleep-moci is a GPIO that
> allows the system on module to turn off regulators that are not needed
> in suspend mode on the carrier board.
>
> Commit ba9d3cd71f15 ("dt-bindings: usb: microchip,usb5744: Remove
> peer-hub as requirement") from linux-next is needed to make DTB_CHECK
> pass without peer-hub set for the hub on the usb1 interface.
>
> Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>

Is this series on your queue? Any concern? I noticed you applied more
recent patches but not this one, therefore asking.

(I know you are travelling, I just want to be sure this is not getting
lost)

Francesco
Re: [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support [ In reply to ]
Hi Stefan Eichenberger,

On Fri, 01 Mar 2024 09:48:59 +0100, Stefan Eichenberger wrote:
> From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
>
> This patch series adds support for sleep-moci to the Verdin AM62 in
> combination with the Dahlia carrier board. sleep-moci is a GPIO that
> allows the system on module to turn off regulators that are not needed
> in suspend mode on the carrier board.
>
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/2] arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
commit: e75f65467e01633afe921acb5742403c86153b48
[2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
commit: 262b0d3d724dc33c7ae1359bcd89abefbad7a886

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D