Mailing List Archive

This patchset introduces a range of error handling
and other misc improvements for the HiSilicon SAS
controller, including:
- controller reset function
- softreset for SATA error handling
- fixes for slot free'ing
- v2 hw error handling improvements
- and other misc, more minor stuff

John Garry (14):
scsi: hisi_sas: add to_hisi_sas_port()
scsi: hisi_sas: move PHY init to hisi_sas_scan_start()
scsi: hisi_sas: remove hisi_sas_port_deformed()
scsi: hisi_sas: error hisi_sas_task_prep() when port down
scsi: hisi_sas: only reset link for PHY_FUNC_LINK_RESET
scsi: hisi_sas: modify hisi_sas_abort_task() for SSP
scsi: hisi_sas: hardreset for SATA disk in LU reset
scsi: hisi_sas: check for SAS_TASK_STATE_ABORTED in slot complete
scsi: hisi_sas: fix some sas_task.task_state_lock locking
scsi: hisi_sas: remove task free'ing for timeouts
scsi: hisi_sas: some modifications to v2 hw reg init values
scsi: hisi_sas: rename hisi_sas_link_timeout_{enable, disable}_link
scsi: hisi_sas: add hisi_sas_clear_nexus_ha()
scsi: hisi_sas: check hisi_sas_lu_reset() error message

Xiang Chen (7):
scsi: hisi_sas: add controller reset
scsi: hisi_sas: add softreset function for SATA disk
scsi: hisi_sas: modify error handling for v2 hw
scsi: hisi_sas: free slots after hardreset
scsi: hisi_sas: process error codes according to their priority
scsi: hisi_sas: release SMP slot in lldd_abort_task
scsi: hisi_sas: use dev_is_sata to identify SATA or SAS disk

Xiaofei Tan (2):
scsi: hisi_sas: handle PHY UP+DOWN simultaneous irq
scsi: hisi_sas: add is_sata_phy_v2_hw()

drivers/scsi/hisi_sas/Kconfig | 2 +-
drivers/scsi/hisi_sas/hisi_sas.h | 15 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 436 +++++++++++++-----
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 19 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 789 ++++++++++++++++++++++++---------
5 files changed, 925 insertions(+), 336 deletions(-)

--
1.9.1