Hi.
I´m using Debian 6.0 on my Vaio and want to watch tv under linux but
nothing happens. I installed the ivtv-firmware and dev/video0 is
created. But when i use "zapping" to watch tv and look for tv-channels
nothing is found.
the command "lspci -v" prints the following:
01:00.0 VGA compatible controller: nVidia Corporation NV36 [GeForce FX
Go5700] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Sony Corporation Device 81ad
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Sony Corporation Device 816d
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: ivtv
the command dmesg prints the following:
[ 5.023414] ivtv: Start initialization, version 1.4.1
[ 5.023576] ivtv0: Initializing card 0
[ 5.023583] ivtv0: Unknown card: vendor/device: [4444:0016]
[ 5.023800] ivtv0: subsystem vendor/device: [104d:816d]
[ 5.023978] ivtv0: cx23416 based
[ 5.024127] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[ 5.024286] ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
[ 5.024527] ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
[ 5.024735] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
[ 5.025084] ivtv 0000:02:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.083469] tveeprom 1-0050: Encountered bad packet header [aa]. Corrupt
or not a Hauppauge eeprom.
[ 5.083473] ivtv0: Invalid EEPROM
[ 5.576900] nvidia: module license 'NVIDIA' taints kernel.
[ 5.576905] Disabling lock debugging due to kernel taint
[ 5.929392] cx25840 1-0044: cx25 0-21 found @ 0x88 (ivtv i2c driver #0)
[ 6.140098] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.140110] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.140392] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.27 Tue
Jul 13 20:39:52 PDT 2010
[ 6.855804] cfg80211: Using static regulatory domain info
[ 6.855810] cfg80211: Regulatory domain: US
[ 6.855813] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 6.855819] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.855824] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855829] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855833] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855838] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855843] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.856267] cfg80211: Calling CRDA for country: US
[ 6.996955] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
[ 7.036692] tda9887 1-0043: creating new instance
[ 7.036698] tda9887 1-0043: tda988[5/6/7] found
[ 7.057151] All bytes are equal. It is not a TEA5767
[ 7.057242] tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[ 7.092353] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 7.095304] wm8775 1-001b: I2C: cannot write 000 to register R23
[ 7.098431] wm8775 1-001b: I2C: cannot write 000 to register R7
[ 7.101738] wm8775 1-001b: I2C: cannot write 021 to register R11
[ 7.104854] wm8775 1-001b: I2C: cannot write 102 to register R12
[ 7.107986] wm8775 1-001b: I2C: cannot write 000 to register R13
[ 7.111102] wm8775 1-001b: I2C: cannot write 1d4 to register R14
[ 7.114211] wm8775 1-001b: I2C: cannot write 1d4 to register R15
[ 7.117463] wm8775 1-001b: I2C: cannot write 1bf to register R16
[ 7.120602] wm8775 1-001b: I2C: cannot write 185 to register R17
[ 7.123701] wm8775 1-001b: I2C: cannot write 0a2 to register R18
[ 7.126895] wm8775 1-001b: I2C: cannot write 005 to register R19
[ 7.130005] wm8775 1-001b: I2C: cannot write 07a to register R20
[ 7.133190] wm8775 1-001b: I2C: cannot write 102 to register R21
[ 7.133381] IRQ 21/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.133984] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 7.134077] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 7.134168] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 7.134255] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 7.134340] ivtv0: Registered device radio0 for encoder radio
[ 7.134345] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[ 7.134386] tifm_7xx1 0000:02:0b.3: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 7.138015] yenta_cardbus 0000:02:0b.0: CardBus bridge found [104d:818f]
[ 7.138037] yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC
interrupts to PCI
[ 7.138043] yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI
[ 7.138051] yenta_cardbus 0000:02:0b.0: TI: mfunc 0x00021b22, devctl 0x64
[ 7.138612] ivtv: End initialization
I´m not using module options.
the file /var/log/kern.log has the following entries:
Mar 3 03:58:23 localhost kernel: [ 456.129493] tuner 1-0060: tuner type
not set
Mar 3 03:58:23 localhost kernel: [ 456.132442] wm8775 1-001b: I2C:
cannot write 0c0 to register R21
Mar 3 03:58:23 localhost kernel: [ 456.135412] wm8775 1-001b: I2C:
cannot write 1d4 to register R14
Mar 3 03:58:23 localhost kernel: [ 456.138366] wm8775 1-001b: I2C:
cannot write 1d4 to register R15
Mar 3 03:58:23 localhost kernel: [ 456.141322] wm8775 1-001b: I2C:
cannot write 102 to register R21
Now my question:
Can anybody help me to get this tv-card running?
Thank you for your help.
Alex
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users
I´m using Debian 6.0 on my Vaio and want to watch tv under linux but
nothing happens. I installed the ivtv-firmware and dev/video0 is
created. But when i use "zapping" to watch tv and look for tv-channels
nothing is found.
the command "lspci -v" prints the following:
01:00.0 VGA compatible controller: nVidia Corporation NV36 [GeForce FX
Go5700] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Sony Corporation Device 81ad
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:09.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Sony Corporation Device 816d
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: ivtv
the command dmesg prints the following:
[ 5.023414] ivtv: Start initialization, version 1.4.1
[ 5.023576] ivtv0: Initializing card 0
[ 5.023583] ivtv0: Unknown card: vendor/device: [4444:0016]
[ 5.023800] ivtv0: subsystem vendor/device: [104d:816d]
[ 5.023978] ivtv0: cx23416 based
[ 5.024127] ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
[ 5.024286] ivtv0: Please mail the vendor/device and subsystem
vendor/device IDs and what kind of
[ 5.024527] ivtv0: card you have to the ivtv-devel mailinglist
(www.ivtvdriver.org)
[ 5.024735] ivtv0: Prefix your subject line with [UNKNOWN IVTV CARD].
[ 5.025084] ivtv 0000:02:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 5.083469] tveeprom 1-0050: Encountered bad packet header [aa]. Corrupt
or not a Hauppauge eeprom.
[ 5.083473] ivtv0: Invalid EEPROM
[ 5.576900] nvidia: module license 'NVIDIA' taints kernel.
[ 5.576905] Disabling lock debugging due to kernel taint
[ 5.929392] cx25840 1-0044: cx25 0-21 found @ 0x88 (ivtv i2c driver #0)
[ 6.140098] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.140110] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.140392] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.27 Tue
Jul 13 20:39:52 PDT 2010
[ 6.855804] cfg80211: Using static regulatory domain info
[ 6.855810] cfg80211: Regulatory domain: US
[ 6.855813] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 6.855819] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.855824] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855829] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855833] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855838] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.855843] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.856267] cfg80211: Calling CRDA for country: US
[ 6.996955] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
[ 7.036692] tda9887 1-0043: creating new instance
[ 7.036698] tda9887 1-0043: tda988[5/6/7] found
[ 7.057151] All bytes are equal. It is not a TEA5767
[ 7.057242] tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[ 7.092353] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 7.095304] wm8775 1-001b: I2C: cannot write 000 to register R23
[ 7.098431] wm8775 1-001b: I2C: cannot write 000 to register R7
[ 7.101738] wm8775 1-001b: I2C: cannot write 021 to register R11
[ 7.104854] wm8775 1-001b: I2C: cannot write 102 to register R12
[ 7.107986] wm8775 1-001b: I2C: cannot write 000 to register R13
[ 7.111102] wm8775 1-001b: I2C: cannot write 1d4 to register R14
[ 7.114211] wm8775 1-001b: I2C: cannot write 1d4 to register R15
[ 7.117463] wm8775 1-001b: I2C: cannot write 1bf to register R16
[ 7.120602] wm8775 1-001b: I2C: cannot write 185 to register R17
[ 7.123701] wm8775 1-001b: I2C: cannot write 0a2 to register R18
[ 7.126895] wm8775 1-001b: I2C: cannot write 005 to register R19
[ 7.130005] wm8775 1-001b: I2C: cannot write 07a to register R20
[ 7.133190] wm8775 1-001b: I2C: cannot write 102 to register R21
[ 7.133381] IRQ 21/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.133984] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 7.134077] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 7.134168] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 7.134255] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 7.134340] ivtv0: Registered device radio0 for encoder radio
[ 7.134345] ivtv0: Initialized card: Hauppauge WinTV PVR-150
[ 7.134386] tifm_7xx1 0000:02:0b.3: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 7.138015] yenta_cardbus 0000:02:0b.0: CardBus bridge found [104d:818f]
[ 7.138037] yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC
interrupts to PCI
[ 7.138043] yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI
[ 7.138051] yenta_cardbus 0000:02:0b.0: TI: mfunc 0x00021b22, devctl 0x64
[ 7.138612] ivtv: End initialization
I´m not using module options.
the file /var/log/kern.log has the following entries:
Mar 3 03:58:23 localhost kernel: [ 456.129493] tuner 1-0060: tuner type
not set
Mar 3 03:58:23 localhost kernel: [ 456.132442] wm8775 1-001b: I2C:
cannot write 0c0 to register R21
Mar 3 03:58:23 localhost kernel: [ 456.135412] wm8775 1-001b: I2C:
cannot write 1d4 to register R14
Mar 3 03:58:23 localhost kernel: [ 456.138366] wm8775 1-001b: I2C:
cannot write 1d4 to register R15
Mar 3 03:58:23 localhost kernel: [ 456.141322] wm8775 1-001b: I2C:
cannot write 102 to register R21
Now my question:
Can anybody help me to get this tv-card running?
Thank you for your help.
Alex
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users