Hi, i have a board Hauppauge HVR 1600, but don't function nice. I'm with
Kernel '2.6.32.11-99.fc12.i686' and use module 'cx18'. When load my system i
see that cx18 modules started fine, but when i run the command 'lspci -vvv',
i get return:
03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23418
Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio
Decoder
Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 50000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx-18
Kernel modules: cx18
I see a erro with pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable. So i not even be able of capture something.
It's is about error cx18 modules or error with ivtv ?
Kernel: 2.6.32.11-99.fc12.i686
Ivtv: 1.4.1
Mario Uzae
Kernel '2.6.32.11-99.fc12.i686' and use module 'cx18'. When load my system i
see that cx18 modules started fine, but when i run the command 'lspci -vvv',
i get return:
03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23418
Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio
Decoder
Subsystem: Hauppauge computer works Inc. WinTV HVR-1600
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 50000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx-18
Kernel modules: cx18
I see a erro with pcilib: sysfs_read_vpd: read failed: Connection timed out
Not readable. So i not even be able of capture something.
It's is about error cx18 modules or error with ivtv ?
Kernel: 2.6.32.11-99.fc12.i686
Ivtv: 1.4.1
Mario Uzae