Hi,
With Jarod's help, I'm using the lirc_zilog module to enable my pvr 150
IR blaster. The box is fitted with two pvr 150's. Before rebooting, I
had both a /dev/lirc0 and a /dev/lirc1. I had to open the box up to
connect another fan and after booting, I only have one /dev/lirc0
showing up. I think opening the box has nothing to do with it, but I
thought I'd mention it. Both IVTV cards are registered. What can I do
to debug this or better yet to activate the second blaster/remote
consistently?
Here are my box details:
Linux notivo 2.6.31.5-desktop-1mnb #1 SMP Fri Oct 23 01:46:54 EDT 2009
i686 AMD Athlon(tm) II X2 250 Processor GNU/Linux
/etc/modprobe.conf:
# I2C module options
alias char-major-89 i2c-dev
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
Message log info:
Dec 14 16:45:06 notivo ivtv: Start initialization, version 1.4.1
Dec 14 16:45:06 notivo ivtv0: Initializing card 0
Dec 14 16:45:06 notivo ivtv0: Autodetected Hauppauge card (cx23416 based)
Dec 14 16:45:06 notivo ivtv 0000:03:06.0: PCI INT A -> GSI 20 (level,
low) -> IRQ 20
Dec 14 16:45:06 notivo ivtv0: Unreasonably low latency timer, setting to
64 (was 32)
Dec 14 16:45:06 notivo ivtv0: Autodetected Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv0: Reopen i2c bus for IR-blaster support
Dec 14 16:45:06 notivo cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c
driver #0)
Dec 14 16:45:06 notivo tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Dec 14 16:45:06 notivo wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Dec 14 16:45:06 notivo IRQ 20/ivtv0: IRQF_DISABLED is not guaranteed on
shared IRQs
Dec 14 16:45:06 notivo ivtv0: Registered device video0 for encoder MPG
(4096 kB)
Dec 14 16:45:06 notivo ivtv0: Registered device video32 for encoder YUV
(2048 kB)
Dec 14 16:45:06 notivo ivtv0: Registered device vbi0 for encoder VBI
(1024 kB)
Dec 14 16:45:06 notivo ivtv0: Registered device video24 for encoder PCM
(320 kB)
Dec 14 16:45:06 notivo ivtv0: Initialized card: Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv1: Initializing card 1
Dec 14 16:45:06 notivo ivtv1: Autodetected Hauppauge card (cx23416 based)
Dec 14 16:45:06 notivo ivtv 0000:03:07.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
Dec 14 16:45:06 notivo ivtv1: Unreasonably low latency timer, setting to
64 (was 32)
Dec 14 16:45:06 notivo ivtv1: Autodetected Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv1: Reopen i2c bus for IR-blaster support
Dec 14 16:45:06 notivo cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c
driver #1)
Dec 14 16:45:06 notivo tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
Dec 14 16:45:06 notivo wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
Dec 14 16:45:06 notivo IRQ 21/ivtv1: IRQF_DISABLED is not guaranteed on
shared IRQs
Dec 14 16:45:06 notivo ivtv1: Registered device video1 for encoder MPG
(4096 kB)
Dec 14 16:45:06 notivo ivtv1: Registered device video33 for encoder YUV
(2048 kB)
Dec 14 16:45:06 notivo ivtv1: Registered device vbi1 for encoder VBI
(1024 kB)
Dec 14 16:45:06 notivo ivtv1: Registered device video25 for encoder PCM
(320 kB)
Dec 14 16:45:06 notivo ivtv1: Initialized card: Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv: End initialization
Dec 14 16:45:06 notivo ivtv 0000:03:06.0: firmware: requesting
v4l-cx2341x-enc.fw
Dec 14 16:45:06 notivo ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836
bytes)
Dec 14 16:45:06 notivo ivtv 0000:03:07.0: firmware: requesting
v4l-cx2341x-enc.fw
Dec 14 16:45:06 notivo ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836
bytes)
Dec 14 16:45:06 notivo ivtv0: Encoder revision: 0x02060039
Dec 14 16:45:06 notivo ivtv1: Encoder revision: 0x02060039
Dec 14 16:45:06 notivo lirc_dev: IR Remote Control driver registered,
major 251
Dec 14 16:45:06 notivo lirc_zilog: Zilog/Hauppauge IR driver initializing
Dec 14 16:45:06 notivo lirc_zilog: chip found with RX and TX
Dec 14 16:45:06 notivo i2c-adapter i2c-1: lirc_dev: driver lirc_zilog
registered at minor = 0
Dec 14 16:45:06 notivo lirc_zilog: Zilog/Hauppauge IR blaster firmware
version 1.3.0 loaded
Dec 14 16:45:06 notivo lirc_zilog: initialization complete
Thank you,
Rick
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users
With Jarod's help, I'm using the lirc_zilog module to enable my pvr 150
IR blaster. The box is fitted with two pvr 150's. Before rebooting, I
had both a /dev/lirc0 and a /dev/lirc1. I had to open the box up to
connect another fan and after booting, I only have one /dev/lirc0
showing up. I think opening the box has nothing to do with it, but I
thought I'd mention it. Both IVTV cards are registered. What can I do
to debug this or better yet to activate the second blaster/remote
consistently?
Here are my box details:
Linux notivo 2.6.31.5-desktop-1mnb #1 SMP Fri Oct 23 01:46:54 EDT 2009
i686 AMD Athlon(tm) II X2 250 Processor GNU/Linux
/etc/modprobe.conf:
# I2C module options
alias char-major-89 i2c-dev
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
Message log info:
Dec 14 16:45:06 notivo ivtv: Start initialization, version 1.4.1
Dec 14 16:45:06 notivo ivtv0: Initializing card 0
Dec 14 16:45:06 notivo ivtv0: Autodetected Hauppauge card (cx23416 based)
Dec 14 16:45:06 notivo ivtv 0000:03:06.0: PCI INT A -> GSI 20 (level,
low) -> IRQ 20
Dec 14 16:45:06 notivo ivtv0: Unreasonably low latency timer, setting to
64 (was 32)
Dec 14 16:45:06 notivo ivtv0: Autodetected Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv0: Reopen i2c bus for IR-blaster support
Dec 14 16:45:06 notivo cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c
driver #0)
Dec 14 16:45:06 notivo tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Dec 14 16:45:06 notivo wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Dec 14 16:45:06 notivo IRQ 20/ivtv0: IRQF_DISABLED is not guaranteed on
shared IRQs
Dec 14 16:45:06 notivo ivtv0: Registered device video0 for encoder MPG
(4096 kB)
Dec 14 16:45:06 notivo ivtv0: Registered device video32 for encoder YUV
(2048 kB)
Dec 14 16:45:06 notivo ivtv0: Registered device vbi0 for encoder VBI
(1024 kB)
Dec 14 16:45:06 notivo ivtv0: Registered device video24 for encoder PCM
(320 kB)
Dec 14 16:45:06 notivo ivtv0: Initialized card: Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv1: Initializing card 1
Dec 14 16:45:06 notivo ivtv1: Autodetected Hauppauge card (cx23416 based)
Dec 14 16:45:06 notivo ivtv 0000:03:07.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
Dec 14 16:45:06 notivo ivtv1: Unreasonably low latency timer, setting to
64 (was 32)
Dec 14 16:45:06 notivo ivtv1: Autodetected Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv1: Reopen i2c bus for IR-blaster support
Dec 14 16:45:06 notivo cx25840 1-0044: cx25841-23 found @ 0x88 (ivtv i2c
driver #1)
Dec 14 16:45:06 notivo tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
Dec 14 16:45:06 notivo wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
Dec 14 16:45:06 notivo IRQ 21/ivtv1: IRQF_DISABLED is not guaranteed on
shared IRQs
Dec 14 16:45:06 notivo ivtv1: Registered device video1 for encoder MPG
(4096 kB)
Dec 14 16:45:06 notivo ivtv1: Registered device video33 for encoder YUV
(2048 kB)
Dec 14 16:45:06 notivo ivtv1: Registered device vbi1 for encoder VBI
(1024 kB)
Dec 14 16:45:06 notivo ivtv1: Registered device video25 for encoder PCM
(320 kB)
Dec 14 16:45:06 notivo ivtv1: Initialized card: Hauppauge WinTV PVR-150
Dec 14 16:45:06 notivo ivtv: End initialization
Dec 14 16:45:06 notivo ivtv 0000:03:06.0: firmware: requesting
v4l-cx2341x-enc.fw
Dec 14 16:45:06 notivo ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836
bytes)
Dec 14 16:45:06 notivo ivtv 0000:03:07.0: firmware: requesting
v4l-cx2341x-enc.fw
Dec 14 16:45:06 notivo ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836
bytes)
Dec 14 16:45:06 notivo ivtv0: Encoder revision: 0x02060039
Dec 14 16:45:06 notivo ivtv1: Encoder revision: 0x02060039
Dec 14 16:45:06 notivo lirc_dev: IR Remote Control driver registered,
major 251
Dec 14 16:45:06 notivo lirc_zilog: Zilog/Hauppauge IR driver initializing
Dec 14 16:45:06 notivo lirc_zilog: chip found with RX and TX
Dec 14 16:45:06 notivo i2c-adapter i2c-1: lirc_dev: driver lirc_zilog
registered at minor = 0
Dec 14 16:45:06 notivo lirc_zilog: Zilog/Hauppauge IR blaster firmware
version 1.3.0 loaded
Dec 14 16:45:06 notivo lirc_zilog: initialization complete
Thank you,
Rick
_______________________________________________
ivtv-users mailing list
ivtv-users@ivtvdriver.org
http://ivtvdriver.org/mailman/listinfo/ivtv-users