On Saturday, October 08, 2005, at 05:45PM, Adam Forsyth <agforsyth@gmail.com> wrote:
>What's your dmesg output between the "start init ivtv" and "end init
>ivtv" lines? What about if you do dmesg|grep ir?
>
one thing i should mention is that ir_kdb_i2c does not modprobe itself like all the other modules
dmesg|grep ir shows nothing at all related to ir, its mostly SCSI and and IRQ's but anyways
Oct 8 05:09:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 8 05:09:35 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 8 05:09:35 localhost kernel: PCI: Using ACPI for IRQ routing
Oct 8 05:09:35 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 8 05:09:35 localhost kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 8 05:09:35 localhost kernel: PNP: No PS/2 controller found. Probing ports directly.
Oct 8 05:09:35 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 8 05:09:35 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 8 05:09:35 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 16
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
Oct 8 05:09:35 localhost kernel: ICH5: not 100%% native mode: will probe irqs later
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
Oct 8 05:09:35 localhost kernel: ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF90 irq 16
Oct 8 05:09:35 localhost kernel: ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF98 irq 16
Oct 8 05:09:35 localhost kernel: Type: Direct-Access ANSI SCSI revision: 05
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 17
Oct 8 05:09:35 localhost kernel: PCI: Via IRQ fixup for 0000:03:03.0, from 5 to 1
Oct 8 05:09:35 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[f7eff800-f7efffff] Max Packet=[2048]
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18
Oct 8 05:09:35 localhost kernel: ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf7fffc00
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
Oct 8 05:09:35 localhost kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000eec0
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Oct 8 05:09:35 localhost kernel: uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ef00
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
Oct 8 05:09:35 localhost kernel: uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ef20
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
Oct 8 05:09:35 localhost kernel: uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ef40
Oct 8 05:09:35 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0028
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
Oct 8 05:09:35 localhost kernel: #0: Intel ICH5 with AD1985 at 0xf7fff800, irq 21
Oct 8 05:09:35 localhost kernel: Starting balanced_irq
Oct 8 05:09:35 localhost kernel: ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 8 05:09:35 localhost kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
Oct 8 05:09:35 localhost kernel: ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 8 05:09:35 localhost kernel: ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 8 05:09:35 localhost kernel: ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 8 05:09:36 localhost kernel: ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 21 (level, low) -> IRQ 22
Oct 8 05:09:36 localhost kernel: ath0: Atheros 5212: mem=0xf7ee0000, irq=22
Oct 8 05:09:37 localhost kernel: ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 20 (level, low) -> IRQ 17
Oct 8 05:09:49 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Oct 8 05:09:49 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00
Oct 8 17:35:21 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00
Oct 8 17:37:44 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00
Oct 8 17:38:37 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00
Oct 8 17:41:04 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00
and the ivtv stuff
Oct 8 05:09:37 localhost kernel: Linux video capture interface: v1.00
Oct 8 05:09:37 localhost kernel: ivtv: ==================== START INIT IVTV ====================
Oct 8 05:09:37 localhost kernel: ivtv: version 0.3.9 (development snapshot compiled on Thu 06 Oct 2005 06:18:49 PM EDT) loading
Oct 8 05:09:37 localhost kernel: ivtv: Linux version: 2.6.13.3 SMP preempt PENTIUM4 gcc-3.3
Oct 8 05:09:37 localhost kernel: ivtv: In case of problems please include the debug info
Oct 8 05:09:37 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Oct 8 05:09:37 localhost kernel: ivtv: mailing the ivtv-devel mailinglist.
Oct 8 05:09:37 localhost kernel: ivtv: Autodetected WinTV PVR 150 card (iTVC16 based)
Oct 8 05:09:37 localhost kernel: ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 20 (level, low) -> IRQ 17
Oct 8 05:09:37 localhost kernel: tveeprom: ivtv version
Oct 8 05:09:37 localhost kernel: tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8239113
Oct 8 05:09:37 localhost kernel: tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50)
Oct 8 05:09:37 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
Oct 8 05:09:37 localhost kernel: tveeprom: audio processor = CX25841 (type = 23)
Oct 8 05:09:37 localhost kernel: tveeprom: decoder processor = CX25841 (type = 1c)
Oct 8 05:09:37 localhost kernel: ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50]
Oct 8 05:09:37 localhost kernel: ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Oct 8 05:09:37 localhost kernel: cx25840: loading /lib/modules/HcwMakoA.ROM
Oct 8 05:09:38 localhost kernel: ivtv: i2c attach to card #0 ok [client=cx25840, addr=44]
Oct 8 05:09:38 localhost kernel: ivtv: i2c attach to card #0 ok [client=wm8775, addr=1b]
Oct 8 05:09:39 localhost kernel: ivtv: loading /lib/modules/ivtv-fw-enc.bin
Oct 8 05:09:39 localhost kernel: ivtv: Encoder revision: 0x02040011
Oct 8 05:09:39 localhost kernel: ivtv: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Oct 8 05:09:39 localhost kernel: ivtv: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
Oct 8 05:09:39 localhost kernel: ivtv: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
Oct 8 05:09:39 localhost kernel: ivtv: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Oct 8 05:09:40 localhost kernel: ivtv: Initialized WinTV PVR 150, card #0
Oct 8 05:09:40 localhost kernel: ivtv: ==================== END INIT IVTV ====================
>On 10/8/05, Edward Martin <edman007x@mac.com> wrote:
>> since no one answered this on the dev list i'm going to try putting it here
>>
>> i'm trying to follow the guide to getting my remote working from http://ivtv.writeme.ch/tiki-print.php?page=remotes but after i modprobe ir-kbd-i2c it does not show up as a event device, i tried a mknod to add /dev/input/event4 (as 0-3 all exist and none are related to the card) and it still cant find the remote
>>
>> lsmod is (evdev is compiled in the kernel so it doesn't show, but i do have it)
>>
>> root[at]mr-slack:/home/edman007# lsmod
>> Module Size Used by
>> ir_kbd_i2c 8844 0
>> ir_common 8580 1 ir_kbd_i2c
>> w83627hf 30504 0
>> eeprom 7696 0
>> i2c_sensor 3840 2 w83627hf,eeprom
>> i2c_isa 2432 0
>> usb_storage 116496 0
>> intel_agp 23836 1
>> i2c_i801 9228 0
>> tda9887 13840 0
>> wm8775 6620 0
>> cx25840 43796 0
>> firmware_class 10880 1 cx25840
>> tuner 25376 0
>> tveeprom 14508 0
>> ivtv 215956 2
>> i2c_algo_bit 10248 1 ivtv
>> i2c_core 22272 12 ir_kbd_i2c,w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_i801,tda9887,wm8775,cx25840,tuner,tveeprom,i2c_algo_bit
>> videodev 9984 3 ivtv
>> ath_pci 82076 0
>> ath_rate_sample 16904 1 ath_pci
>> wlan 148124 3 ath_pci,ath_rate_sample
>> ath_hal 148944 3 ath_pci,ath_rate_sample
>> nvidia 3714216 12
>> nvidia_agp 8348 0
>> agpgart 36944 3 intel_agp,nvidia,nvidia_agp
>> analog 12448 0
>>
>> and as mentioned in my pervious thread both tveeprom and tuner are the ivtv ones
>>
>> when modprobing ir-kbd-i2c i see nothing in any logs or dmesg, maybe i'm not looking in the right one but i checked syslog and messages and there is nothing about it
>>
>> and my lsinput
>>
>> root[at]mr-slack:/home/edman007# lsinput
>> /dev/input/event0
>> bustype : BUS_USB
>> vendor : 0x46d
>> product : 0xc30a
>> version : 5376
>> name : "Logitech Logitech USB Keyboard"
>> phys : "usb-0000:00:1d.3-1/input0"
>> uniq : ""
>> bits ev : EV_SYN EV_KEY EV_LED EV_REP
>>
>> /dev/input/event1
>> bustype : BUS_USB
>> vendor : 0x46d
>> product : 0xc30a
>> version : 5376
>> name : "Logitech Logitech USB Keyboard"
>> phys : "usb-0000:00:1d.3-1/input1"
>> uniq : ""
>> bits ev : EV_SYN EV_KEY EV_REL EV_ABS
>>
>> /dev/input/event2
>> bustype : BUS_USB
>> vendor : 0x45e
>> product : 0x40
>> version : 768
>> name : "Microsoft Microsoft 3-Button Mou"
>> phys : "usb-0000:00:1d.3-2/input0"
>> uniq : ""
>> bits ev : EV_SYN EV_KEY EV_REL
>>
>> /dev/input/event3
>> bustype : BUS_ISA
>> vendor : 0x1f
>> product : 0x1
>> version : 256
>> name : "PC Speaker"
>> phys : "isa0061/input0"
>> bits ev : EV_SYN EV_SND
>>
>> open /dev/input/event4: No such device
>> root[at]mr-slack:/home/edman007# ls /dev/input/event4
>> /dev/input/event4
>>
>> if i rm the event4 device that i created lsinput still tries to open it, also i'm running the 2.6.13.3 kernel
>>
>> and on another note, does anyone know how to make mythtv use better quality data from the card, all fast motion spots with high contrast (like some one waving their arm) produces very jagged edges and i think its from the mpeg encoding as everything else looks excellent
>>
>> _______________________________________________
>> ivtv-users mailing list
>> ivtv-users@ivtvdriver.org
>> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>>
>
>_______________________________________________
>ivtv-users mailing list
>ivtv-users@ivtvdriver.org
>http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
>