Hello list! First Thank all of you very much for helped me solved so
many problems (e.g. prompt me for installing 2.6 kernel so that I can
use USB keyboard, pointing out I've linked to wrong profile and wrong
root directory permission etc).
After started to use 2.6 kernel I can no longer access the booting HDD
which was /dev/hda and connected to the on-board IDE controller.
sappho ~ # mount -t ext2 /dev/hda1 /mnt
mount: /dev/hda1 is not a valid block device
It seems I don't have proper driver for on-board IDE controller:
sappho ~ # mount -t ext2 /dev/hda1 /mnt
mount: /dev/hda1 is not a valid block device
I know only one method to tell what controller I have, which is lspci:
sappho ~ # lspci
[snip]
01:03.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 03)
02:02.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
[snip]
It's clear '/' is mounted on SATA harddisk on RAID controller, so, it
seems the on-board IDE controller is Silicon Image's PCI0646, however I
do have the driver enabled in kernel:
BLK_DEV_SIIMAGE=y
So this is rather strange to me, do I have to enable other kernel option
to be able to 'see' the booting harddisk?
--
é”业软æœï¼ˆå›½å†…业务) http://www.realss.cn
Real SoftService http://www.realss.com
销售咨询(Sales Department): 0086 592 20 99987 (Chinese, German,
English)
国际业务(International Sales): 0086 10 8460 6011 (German and English)
è”系:厦门大å¦ç§‘技å›ï¼Œå˜‰åºšäºŒå·æ¥¼6楼
邮政:厦门大å¦2312å·ä¿¡ç®±ï¼ˆé‚®ç¼–361005)
many problems (e.g. prompt me for installing 2.6 kernel so that I can
use USB keyboard, pointing out I've linked to wrong profile and wrong
root directory permission etc).
After started to use 2.6 kernel I can no longer access the booting HDD
which was /dev/hda and connected to the on-board IDE controller.
sappho ~ # mount -t ext2 /dev/hda1 /mnt
mount: /dev/hda1 is not a valid block device
It seems I don't have proper driver for on-board IDE controller:
sappho ~ # mount -t ext2 /dev/hda1 /mnt
mount: /dev/hda1 is not a valid block device
I know only one method to tell what controller I have, which is lspci:
sappho ~ # lspci
[snip]
01:03.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 03)
02:02.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50)
[snip]
It's clear '/' is mounted on SATA harddisk on RAID controller, so, it
seems the on-board IDE controller is Silicon Image's PCI0646, however I
do have the driver enabled in kernel:
BLK_DEV_SIIMAGE=y
So this is rather strange to me, do I have to enable other kernel option
to be able to 'see' the booting harddisk?
--
é”业软æœï¼ˆå›½å†…业务) http://www.realss.cn
Real SoftService http://www.realss.com
销售咨询(Sales Department): 0086 592 20 99987 (Chinese, German,
English)
国际业务(International Sales): 0086 10 8460 6011 (German and English)
è”系:厦门大å¦ç§‘技å›ï¼Œå˜‰åºšäºŒå·æ¥¼6楼
邮政:厦门大å¦2312å·ä¿¡ç®±ï¼ˆé‚®ç¼–361005)