Mailing List Archive

On Sat, 29 Oct 2005 13:43:28 +0000 (UTC)
Ferris McCormick <fmccor@gentoo.org> wrote:

> Subject remains true, but is misleading. With
> 2.6.14-U60-2x300-vanilla built with gcc-3.4.4, I cannot get crashme
> to fail (I finally gave up after 30 passes). I gave up on U60(2x450)
> after 11 passes.
>
> I'm going to go out on a limb and say U60+2.6.14(built with
> gcc-sparc64-3.4.4) looks pretty stable. For me, that leaves U2 to
> address.

On an Ultra 1 using 2.6.14 built with gcc-3.3.x, I'm still seeing
lockups. Going to try and build with gcc-3.4.4 today and see how that
goes.

Cheers,
--
Jason Wever
Gentoo/Sparc Team Co-Lead

On Sat, 29 Oct 2005 11:37:37 -0600
Jason Wever <weeve@gentoo.org> wrote:

> On an Ultra 1 using 2.6.14 built with gcc-3.3.x, I'm still seeing
> lockups. Going to try and build with gcc-3.4.4 today and see how that
> goes.

Just to update everyone, using gcc-3.4.4, the Ultra 1 made it farther
through crashme (almost 5 runs instead of 1-2), but it still silently
fails. Nothing was posted to the graphical console even with the syslog
daemon turned off.

Cheers,
--
Jason Wever
Gentoo/Sparc Team Co-Lead

Hi All,

Running crashme.sh on 2.6.14-rc2, (netra 1405 4x440 1G), on around pass 3, the
box dies for all intents and purposes. Can't ping it, ssh sessions all close.
However, 'top' running in a serial console continues to run. At this point, the
box has been dead for about 10 minutes:


top - 08:37:53 up 2:24, 2 users, load average: 3.00, 2.99, 2.91
Tasks: 49 total, 2 running, 47 sleeping, 0 stopped, 0 zombie
Cpu0 : 0.3% us, 0.0% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu1 : 0.0% us, 0.0% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu2 : 0.0% us, 0.0% sy, 0.0% ni, 0.0% id, 100.0% wa, 0.0% hi, 0.0% si
Cpu3 : 0.0% us, 0.0% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 1035088k total, 1029504k used, 5584k free, 133984k buffers
Swap: 499456k total, 152k used, 499304k free, 634056k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
6392 root 16 0 2768 1376 1104 R 0.3 0.1 0:25.55 top
1 root 16 0 1736 696 616 S 0.0 0.1 0:17.74 init
2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
4 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
5 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
6 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1
7 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
8 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
9 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/2
10 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/2
11 root RT 0 0 0 0 S 0.0 0.0 0:00.02 migration/3
12 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/3
13 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/3





I sent a break hoping to get a sysrq in but that killed it the rest of the way.

Josh