Op donderdag 26 december 2013 19:57:43 schreef Joseph:
> On 12/27/13 00:59, Mick wrote:
> >> >Run emerge --sync to get the latest sources and then look under general to
> >> >find it. It is under 'General setup' alright:
> >> >
> >> >General setup --->
> >> >...
> >> >
> >> > [*] System V IPC
> >> > [*] POSIX Message Queues
> >> > [*] open by fhandle syscalls <--This one!
> >> >
> >> >HTH.
> >>
> >> Thank you! Yes, I found it.
> >> Though, it would be nice if I look for an option to enable, from search
> >> menu "/" if it finds it I should be able to select it :-/
> >
> >I think xconfig may be easier for this purpose? I'm not sure, but there are
> >other ncurses, or GUI-fied kernel configuration applications. Try this to see
> >if it serves your purpose when logged into an X session:
> >
> > make xconfig
> >
> >Use Ctrl+f to search for particular modules. Don't forget to save your
> >changes before you build your new kernel!
> >
>
> I tried to search for "CONFIG_FHANDLE" using "xconfig" and it can not even find it; so this application is useless :-/
>
>
You'll find it if you search for FHANDLE, without the CONFIG_.
Paul
> On 12/27/13 00:59, Mick wrote:
> >> >Run emerge --sync to get the latest sources and then look under general to
> >> >find it. It is under 'General setup' alright:
> >> >
> >> >General setup --->
> >> >...
> >> >
> >> > [*] System V IPC
> >> > [*] POSIX Message Queues
> >> > [*] open by fhandle syscalls <--This one!
> >> >
> >> >HTH.
> >>
> >> Thank you! Yes, I found it.
> >> Though, it would be nice if I look for an option to enable, from search
> >> menu "/" if it finds it I should be able to select it :-/
> >
> >I think xconfig may be easier for this purpose? I'm not sure, but there are
> >other ncurses, or GUI-fied kernel configuration applications. Try this to see
> >if it serves your purpose when logged into an X session:
> >
> > make xconfig
> >
> >Use Ctrl+f to search for particular modules. Don't forget to save your
> >changes before you build your new kernel!
> >
>
> I tried to search for "CONFIG_FHANDLE" using "xconfig" and it can not even find it; so this application is useless :-/
>
>
You'll find it if you search for FHANDLE, without the CONFIG_.
Paul