Mailing List Archive

Hello,

We have setup a disk mirroring using drbd Version: 0.6.1-pre7 (api:58)
with a relatively big partition(151GB), and a smaller one, used for
testing (100MB).

Here is a part of the drbd.cong file :
-----------------------------------------
resource drbd0 {

protocol=B
<snip>
on machine1 {
device=/dev/nb0
disk=/dev/sdb1
address=10.1.1.3
port=7788
}

on machine2 {
device=/dev/nb0
disk=/dev/sdb1
address=10.1.1.2
port=7788
}

}
resource drbd1 {
<snip>
on machine1 {
device=/dev/nb1
disk=/dev/sdb2
address=10.1.1.3
port=7789
}

on machine2 {
device=/dev/nb1
disk=/dev/sdb2
address=10.1.1.2
port=7789
}
}
-----------------------------------------

------------------------
on machine1
cat /proc/drbd
version: 0.6.1-pre7 (api:58/proto:60)

0: cs:Connected st:Primary/Secondary ns:1996 nr:0 dw:1996 dr:1629 pe:0
ua:0
1: cs:Connected st:Primary/Secondary ns:384 nr:208928 dw:209324 dr:611
pe:0 ua:0

------------------------
on machine2
# cat /proc/drbd
version: 0.6.1-pre7 (api:58/proto:60)

0: cs:SyncingAll st:Secondary/Primary ns:0 nr:1996 dw:1996 dr:0 pe:0 ua:0
1: cs:Connected st:Secondary/Primary ns:96 nr:380 dw:476 dr:316 pe:0 ua:0

------------------------

drbd1 is up and running, but drbd0 status is stuck.
Machine2 seams to be in full sync, but neither nr nor dw are
increasing, as I would expect.
Both machines can ping both interface 10.1.1.[2|3]

Has anyone sone ideas about what is going on, or in that case, not going
on :) ? What am I doing wrong?

Thanks in advance.
Best regards
--
arnaud LE BRETON | "Why do you necessarily have to be wrong just
| because a few million people think you are?"
Linpro AS | Frank Zappa