Hi,
The first one on the list is really awkward. Therefore it is better
to not use 8.0.10 (and not 8.0.9).
8.0.11 (api:86/proto:86)
--------
* If we had no IO while a device was connected it could happen that
the pending count was erroneously decreased to -1 at disconnect.
Fixed.
* Fixed a race that could deadlock worker and receiver while
disconnecting a diskless node from a primary peer.
* Fixed a minimal meory leak, upon each module unload of DRBD.
8.0.10 (api:86/proto:86)
--------
* Fixed a race condition in the disconnect code path that could cause
the pending count to not return to zero. This means that the
next role change will block forever.
8.0.9 (api:86/proto:86)
--------
* In case our backing devices support write barriers and cache
flushes, we use these means to ensure data integrity in
the presence of volatile disk write caches and power outages.
* Fixed DRBD to no longer log
"Sync bitmap getting lost (drbd_bm_set_bits_in_irq: (!b->bm))"
endlessly after the local disk was lost.
* Fixed protocol A for BIOs larger than the page size. If you
hit the bug, DBBD would simply lose connection.
* Don't accidentally truncate the device in case a secondary with
a too small disk gets connected.
* Changed state processing so that state changes visible
via the drbdsetup events interface are always in the right order.
* Made drbddisk's exit codes more LSB compliant.
* Back-ported the new drbdmeta to drbd-8.0 (from drbd-8.2).
* More robustness to the code that establishes connections.
* Made '/etc/init.d/drbd status' to print a nice overview.
* Made it to compile on Linux-2.6.24.
http://git.drbd.org/?p=drbd-8.0.git;a=tag;h=drbd-8.0.11
http://oss.linbit.com/drbd/8.0/drbd-8.0.11.tar.gz
http://www.linbit.com/support/drbd-8.0.11/
-Phil
--
: Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 :
: LINBIT Information Technologies GmbH Fax +43-1-8178292-82 :
: Vivenotgasse 48, 1120 Vienna, Austria http://www.linbit.com :
_______________________________________________
drbd-announce mailing list
drbd-announce@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-announce
The first one on the list is really awkward. Therefore it is better
to not use 8.0.10 (and not 8.0.9).
8.0.11 (api:86/proto:86)
--------
* If we had no IO while a device was connected it could happen that
the pending count was erroneously decreased to -1 at disconnect.
Fixed.
* Fixed a race that could deadlock worker and receiver while
disconnecting a diskless node from a primary peer.
* Fixed a minimal meory leak, upon each module unload of DRBD.
8.0.10 (api:86/proto:86)
--------
* Fixed a race condition in the disconnect code path that could cause
the pending count to not return to zero. This means that the
next role change will block forever.
8.0.9 (api:86/proto:86)
--------
* In case our backing devices support write barriers and cache
flushes, we use these means to ensure data integrity in
the presence of volatile disk write caches and power outages.
* Fixed DRBD to no longer log
"Sync bitmap getting lost (drbd_bm_set_bits_in_irq: (!b->bm))"
endlessly after the local disk was lost.
* Fixed protocol A for BIOs larger than the page size. If you
hit the bug, DBBD would simply lose connection.
* Don't accidentally truncate the device in case a secondary with
a too small disk gets connected.
* Changed state processing so that state changes visible
via the drbdsetup events interface are always in the right order.
* Made drbddisk's exit codes more LSB compliant.
* Back-ported the new drbdmeta to drbd-8.0 (from drbd-8.2).
* More robustness to the code that establishes connections.
* Made '/etc/init.d/drbd status' to print a nice overview.
* Made it to compile on Linux-2.6.24.
http://git.drbd.org/?p=drbd-8.0.git;a=tag;h=drbd-8.0.11
http://oss.linbit.com/drbd/8.0/drbd-8.0.11.tar.gz
http://www.linbit.com/support/drbd-8.0.11/
-Phil
--
: Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 :
: LINBIT Information Technologies GmbH Fax +43-1-8178292-82 :
: Vivenotgasse 48, 1120 Vienna, Austria http://www.linbit.com :
_______________________________________________
drbd-announce mailing list
drbd-announce@lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-announce