We have several TRU64 servers whose console serial cables are connected to a
DEC 900 terminal server.
We currently use TECSys Consoleworks for remote administration but we are
looking for an alternative.
I have set-up one console. When I try to connect I get the following
message:
./console bfm
console: bfm is down
[Enter `^Ec?' for help]
[read-only -- use ^E c ? for help]
The console log (nohup) reports only the following ...
conserver (75809): bfm: login root@mersey [Tue Sep 17
16:49:08 2002]
conserver (75809): bfm: logout root@mersey [Tue Sep 17
16:54:43 2002]
conserver.cf reads ...
LOGDIR=/var/consoles
bfm:!10.92.54.13:2022:&:
%%
trusted: mersey
conserver.passwd reads ...
any:*passwd*:any
/etc/services reads ...
console 782/tcp conserver
Output from from conserver -V ...
conserver: conserver.com version 7.2.2
conserver: default access type `r'
conserver: default escape sequence `^Ec'
conserver: configuration in `/usr/local/etc/conserver.cf'
conserver: password in `/usr/local/etc/conserver.passwd'
conserver: logfile is `/var/log/conserver'
conserver: pidfile is `/var/run/conserver.pid'
conserver: limited to 16 members per group
conserver: on port 782 (referenced as `conserver')
conserver: secondary channel base port 0 (referenced as `0')
conserver: built with `./configure --with-64bit
--with-master=mersey'
DEC server 900 config is as follows ...
Local> DEFINE PORT 5 ACCESS REMOTE AUTOBAUD DISABLED
Local> DEFINE PORT 5 SPEED 9600 MODEM CONTROL ENABLED
Local> DEFINE PORT 5 AUTOPROMPT DISABLED BROADCAST DISABLED
Local> DEFINE PORT 5 PREFERRED NONE DEDICATED NONE
Local> LOGOUT PORT 5
Local> CHANGE TELNET LISTENER 2005 PORT 5 ENABLED
Local> CHANGE TELNET LISTENER 2005 CONNECTIONS ENABLED
Can anyone point me in the right direction? The DEC 900 settings work fine
with Consoleworks therefore I am assuming that this a conserver set-up
problem.
Thanks
Frank
*********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.
DEC 900 terminal server.
We currently use TECSys Consoleworks for remote administration but we are
looking for an alternative.
I have set-up one console. When I try to connect I get the following
message:
./console bfm
console: bfm is down
[Enter `^Ec?' for help]
[read-only -- use ^E c ? for help]
The console log (nohup) reports only the following ...
conserver (75809): bfm: login root@mersey [Tue Sep 17
16:49:08 2002]
conserver (75809): bfm: logout root@mersey [Tue Sep 17
16:54:43 2002]
conserver.cf reads ...
LOGDIR=/var/consoles
bfm:!10.92.54.13:2022:&:
%%
trusted: mersey
conserver.passwd reads ...
any:*passwd*:any
/etc/services reads ...
console 782/tcp conserver
Output from from conserver -V ...
conserver: conserver.com version 7.2.2
conserver: default access type `r'
conserver: default escape sequence `^Ec'
conserver: configuration in `/usr/local/etc/conserver.cf'
conserver: password in `/usr/local/etc/conserver.passwd'
conserver: logfile is `/var/log/conserver'
conserver: pidfile is `/var/run/conserver.pid'
conserver: limited to 16 members per group
conserver: on port 782 (referenced as `conserver')
conserver: secondary channel base port 0 (referenced as `0')
conserver: built with `./configure --with-64bit
--with-master=mersey'
DEC server 900 config is as follows ...
Local> DEFINE PORT 5 ACCESS REMOTE AUTOBAUD DISABLED
Local> DEFINE PORT 5 SPEED 9600 MODEM CONTROL ENABLED
Local> DEFINE PORT 5 AUTOPROMPT DISABLED BROADCAST DISABLED
Local> DEFINE PORT 5 PREFERRED NONE DEDICATED NONE
Local> LOGOUT PORT 5
Local> CHANGE TELNET LISTENER 2005 PORT 5 ENABLED
Local> CHANGE TELNET LISTENER 2005 CONNECTIONS ENABLED
Can anyone point me in the right direction? The DEC 900 settings work fine
with Consoleworks therefore I am assuming that this a conserver set-up
problem.
Thanks
Frank
*********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.