Mailing List Archive

http://www.weedtech.com/ has info on controlling relays with a COM port.
See this also...
http://www.velleman.be/Product.asp?lan=1&id=9358


> -----Original Message-----
> From: users-admin@conserver.com [mailto:users-admin@conserver.com]On
> Behalf Of Bernard Dugas
> Sent: Wednesday, May 08, 2002 10:59 AM
> To: users@conserver.com
> Subject: COM port for voltage command/measurement ?
>
>
> Hi,
>
> I did some search on your archives and others, and found no info on that
> :
>
> I need to use a com port to command voltage on com port pins, to be able
> to drive external relays.
>
> Would anybody have any hint/example for that function ?
>
> Best regards,
> --
>
> __________ Bernard DUGAS ________________________________________
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
>

I have seen this done with Paralelle ports more often than serial ports.

Brandon Saunders
Senior Network Engineer
Ohio University Communication Network Services
Email: brandon.a.saunders.1@ohiou.edu
Phone: (740)593-9835
Cell: (740)707-4945
Pager: (740)592-7828
Fax: (740)593-1944

--On Wednesday, May 08, 2002 04:59:13 PM +0200 Bernard Dugas
<bernard.dugas@is-production.com> wrote:

> Hi,
>
> I did some search on your archives and others, and found no info on that
> :
>
> I need to use a com port to command voltage on com port pins, to be able
> to drive external relays.
>
> Would anybody have any hint/example for that function ?
>
> Best regards,
> --
>
> __________ Bernard DUGAS ________________________________________
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users