Mailing List Archive: HELP

You'll need a NULL modem cable and with 25 pin connectors on both
sides, one male, one female. As for the terminal emulation, you'll
need to set the appropriate terminal type once you log in. If the Sun
is running Solaris, you can edit the 'ttymon' line in /etc/inittab and
change the terminal type to whatever you'll be using (the -T
argument). I usually set things to vt100 (so, '-T vt100' on the line)
'cause a lot of terminal emulators can do vt100. Then, when you
connect with conserver, just make sure your terminal (be it an xterm,
hyperterm, whatever) is set to vt100 (or whatever you set the -T
argument to).

Hope that helps. Good luck!

Bryan

On Wed, Jun 27, 2001 at 09:03:34AM +0200, Anna de Espona wrote:
> Hello,
>
> I have:
> - Sun workstation, connector 25 pins female,
> - Pc with Linux RedHat 6.2 , connector 25 pins male
> This will be console server. Software conserver 7.0.2
>
> What kind of serial cable I need to connect serial port of SUN
> Workstation to serial port of PC to prove this software ( conserver )
> and emulate SUN Console on PC with Linux. ?
> NUll modem or no ??
>
>
> Thanks a lot,
>
> Sincerely
>
> Ana
>
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users