Mailing List Archive

well, you have two options, really. if you have an old-style config
file, you can use the 'convert' program that gets built with the new
server. it'll take the old-style and make a new-style config file.

otherwise, i'd use something like:

access * { allowed 127.0.0.1; }

default digi {
master localhost; logfile &;
type device; baud 9600; parity none;
host unused;
device /dev/sts/ttyC&;
devicesubst &=P02d;
rw *;
}

console hostname1 { include digi; port 1; }
console hostname2 { include digi; port 2; }

this assumes the naming is /dev/sts/ttyC01 through /dev/sts/ttyCXX where
XX is decimal. adjust devicesubst if that isn't right.

hope that helps. between the two, i hope it'll go for ya.

Bryan

On Fri, Feb 10, 2006 at 04:23:47PM -0700, Sarah Thompson wrote:
> I am attempting to get a solaris 10 box going with conserver. I have
> installed the software on the Sun box and am now trying to edit the
> configuration file to talk to my Digi ST-1032 terminal servers. The
> conserver.cf is way too complicated for what I need...my old
> conserver.cf literally had the log file location and then lines that
> looked like this
> hostname:/dev/sts/ttyC01:9600n:&::
>
> Simply defining which port of the digi each host was plugged into. I
> try to keep it that simple with conserver version 8.1.12 but I'm not
> even close to getting conserver to run. Any help would be appreciated.
> Thanks, Sarah
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users