Mailing List Archive

use a translation rule on the incoming dial-peer to modify the called
party number to match the specific VOIP dial-peer destinaiton pattern.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a0080094681.shtml
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

Otherwise, it seem that the COR feature in the router could be used to
achieve this.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

/Wes

CM Rahman wrote:

>Anybody know what I need to do if I want a call that is coming from
>certain pots dial-peer to go directly to certain voip dial-peer,
>regardless which number it is calling?
>
>
>Lets say.. dial-peer 101 pots should always go to dial-peer 200 voip .
>
>Looking for clue on this issue.
>
>Thanks
>
>
>
>&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*
>C.M. Rahman Jr.
>CTO
>CCNP, MCSE Security "Secure your self by securing your System"
>CompTI Security Plus Certified
>CCS Internet
>http://www.ccsi.com <http://www.ccsi.com/>
>13704 Research Blvd. Building O-Suite 4
>Austin, TX 78750
>Tel: 512-257-2274 Ex: 115
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip@puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

Can you explain me if I put this command under

Voice-port 7/2
Connection lurp 64


And under dial peer

Dial-peer vice 200 voip
Destination-pattern 64



Will this work? It does route the call to dial-peer 200 but after that
call is being droped.



&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*
C.M. Rahman Jr.
CTO
CCNP, MCSE Security "Secure your self by securing your System"
CompTI Security Plus Certified
CCS Internet
http://www.ccsi.com <http://www.ccsi.com/>
13704 Research Blvd. Building O-Suite 4
Austin, TX 78750
Tel: 512-257-2274 Ex: 115
________________________________

From: Daniel Tibor Fuchs [mailto:daniel.fuchs@datora.net]
Sent: Wednesday, July 14, 2004 5:35 AM
To: CM Rahman
Subject: RE: [cisco-voip] matching cisco pots with certian voip
dial-peer

It depends how do the call will hit the Dial-peer 101.

Let's say that always will came as 0013xxxxxxx.

Than you can build something like this:

Translation-rule 2020
Rule 0 0013.% 2020#

Dial-peer voice 101 pots
Incoming called-number 0013T
Translate-outgoing called 2020

Dial-peer voice 200 voip
Destination-pattern 2020#T
Session target ipv4:zzz.zzz.zzz.zzz

I hope this will help.

Daniel

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of CM Rahman
Sent: Tuesday, July 13, 2004 6:24 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] matching cisco pots with certian voip dial-peer

Anybody know what I need to do if I want a call that is coming from
certain pots dial-peer to go directly to certain voip dial-peer,
regardless which number it is calling?


Lets say.. dial-peer 101 pots should always go to dial-peer 200 voip .

Looking for clue on this issue.

Thanks



&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*&*
C.M. Rahman Jr.
CTO
CCNP, MCSE Security "Secure your self by securing your System"
CompTI Security Plus Certified
CCS Internet
http://www.ccsi.com <http://www.ccsi.com/>
13704 Research Blvd. Building O-Suite 4
Austin, TX 78750
Tel: 512-257-2274 Ex: 115