Mailing List Archive

call origination
Hi,
I explained my scenario. pls, help me about this problem.

My scenario is:

gsm channel bank------------->controller e1------->myGW----------------->destGW
|
|
Radius

If a call comes from gsm channel bank, call must be authenticated, authorized and accounted in radius. First, ý dont use radius, i add the following dial-peer, but it did not work.

dial-peer voice 100 voip
incomming called-number 9054T
voice-class codec 99
voice-class h323 99
session target ipv4:a.b.c.d

voice class codec 99
codec preference 1 g729r8
codec preference 2 g723r53
codec preference 3 g723r63
codec preference 4 g723ar63

voice class h323 99
call start fast
****************************************************************************
Then I tried with radius config. If someone call the number of sim in the gsm channel bank, then first I want to authenticate and authorize than the person should dial the destination number. I tried, but no request comes to radius.
Can you help me?
in "session target ipv4:a.b.c.d" after authentication and authorization I can decide a.b.c.d because there is more than one gw to go call.

aaa authentication login deneme group radius
aaa authentication ppp deneme group radius
aaa authorization exec deneme group radius
aaa authorization network deneme group radius
aaa accounting update newinfo
aaa accounting exec deneme start-stop group radius
aaa accounting network deneme start-stop group radius
aaa accounting connection deneme start-stop group radius
aaa preauth
group radius
clid required
dnis required

radius-server host x.x.x.x auth-port 1812 acct-port 1813
radius-server key 7 100000000618
radius-server vsa send accounting
radius-server vsa send authentication

voice class aaa 1
authentication method deneme
authorization method deneme
accounting method deneme

dial-peer voice 100 voip
incomming called-number 9054T
voice-class codec 99
voice-class aaa 1
voice-class h323 99
session target ras


aniel Tibor Fuchs <daniel.fuchs@datora.net> wrote:
v\:* {behavior:url(#default#VML);}o\:* {behavior:url(#default#VML);}w\:* {behavior:url(#default#VML);}.shape {behavior:url(#default#VML);}
Did you add a dial-peer for incoming called number?



Dial-peer voice 10 pots

Port xxxx

Incoming callet .T



And you need a Dia-peer voip to direct the traffic to the terminator.



Dial-peer voice 20 voip

Destination-pattern xxT

Session target ip4:xxx.xxx.xxx.xxx

Tech xxxx



This is really generic.



Daniel





---------------------------------


From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of ]smail CAN
Sent: Thursday, July 08, 2004 8:56 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] origination




hi,





I am new with as5350 configuration. I can not configure my as5350 gateway for call origination.





gsm channel bank------------->controller e1--as5350---------->


|


|


radius





Can you help me or send config part only belongs to origination?














---------------------------------


Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.



---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!


---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!