Mailing List Archive

This is a binary file that isn't very intuitive. It does contain the
"default loads" aka, which loads all endpoints should run unless a
device-specific load is configured. Get a friend with CM(E) to configure
the defaults you need, then copy of the generated file.

If you don't mind my asking, what SCCP server are you planning to use other
than CM or CME?

/Wes

> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net]On Behalf Of TC
> Giufre-Sweetser
> Sent: Saturday, June 19, 2004 6:15 PM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] SEPDefault.cnf
>
>
>
>
> How do you generate this file if you dont use CM or CME?
>
>
> ---
> Terence C. Giufre-Sweetser
>
> +--------------------------------+--------------------------+
> | TereDonn Computer Engineering | FAX +61-[0]7-34204971 |
> | PO BOX 485, MT GRAVATT 4122 | Mobile +61-[0]414-663053 |
> | Queensland Australia | http://www.tdce.com.au |
> +--------------------------------+--------------------------+
> | DSL from 256K to 16M, Qld wide coverage, Wholesale prices |
> +-----------------------------------------------------------+
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

> If you don't mind my asking, what SCCP server are you planning to use
> other than CM or CME?

AsteriskPBX on Debian Linux... :)

---
Terence C. Giufre-Sweetser

+--------------------------------+--------------------------+
| TereDonn Computer Engineering | FAX +61-[0]7-34204971 |
| PO BOX 485, MT GRAVATT 4122 | Mobile +61-[0]414-663053 |
| Queensland Australia | http://www.tdce.com.au |
+--------------------------------+--------------------------+
| DSL from 256K to 16M, Qld wide coverage, Wholesale prices |
+-----------------------------------------------------------+

On Mon, Jun 21, 2004 at 11:10:05AM -0400, Wes Sisk wrote:
> This is a binary file that isn't very intuitive. It does contain the
> "default loads" aka, which loads all endpoints should run unless a
> device-specific load is configured. Get a friend with CM(E) to configure
> the defaults you need, then copy of the generated file.
>
> If you don't mind my asking, what SCCP server are you planning to use other
> than CM or CME?

I have my 7920 working with Asterisk as well. I keep
nagging my account team about when there will be a SIP beta.

Now if I can just figure out why these 7970's won't boot..

- jared

--
Jared Mauch | pgp key available via finger from jared@puck.nether.net
clue++; | http://puck.nether.net/~jared/ My statements are only mine.