Hi all,
My gw1 is working with destination gw2(partner) directly.
Gw 2 accepts only gw1 ip address.
I want to send calls from my gw3 to gw2 via gw1.
Gw 1 will be transit gw. All gws are Cisco5300.
But gw1 is releasing all calls (h323 cause code =3).
Please help me How i can make transit calls via GW1.
I did like below.
Gw3 :
dial-peer voice 33 voip
destination pattern 123T
session target ipv4:gateway1-ip-address
Gw1 :
dial-peer voice 11 voip
destination pattern 123T
session target ipv4:gateway2-ip-address
Gw1 :
dial-peer voice 11 pot
destination pattern 123T
port 0:0
My gw1 is working with destination gw2(partner) directly.
Gw 2 accepts only gw1 ip address.
I want to send calls from my gw3 to gw2 via gw1.
Gw 1 will be transit gw. All gws are Cisco5300.
But gw1 is releasing all calls (h323 cause code =3).
Please help me How i can make transit calls via GW1.
I did like below.
Gw3 :
dial-peer voice 33 voip
destination pattern 123T
session target ipv4:gateway1-ip-address
Gw1 :
dial-peer voice 11 voip
destination pattern 123T
session target ipv4:gateway2-ip-address
Gw1 :
dial-peer voice 11 pot
destination pattern 123T
port 0:0