Hi,
At 12:51 AM 14.04.2004, you wrote:
>I have managed to make it work with the following command (using latest
>radiator version):
>
>./radpwtst -s routername -secret xxxxxx -auth_port 1812 -acct_port 1812
>-noauth -noacct -dictionary /usr/radius/radiator/cf/dictionary -code
>Disconnect-Request User-Name=usernameX
>
>"usernameX" is the user i'm trying to disconnect
I run same command in Radius machine to my VoIP gateway AS5300. Nothing
happens.
But when I run this command against Dial-Up AS5300 it works perfect.
Are you using it for Dial-Up or for VoIP gateway?
thanks in advance,
Ganbold
>AS5300 (12.2(15)T8)
>-------------------
>aaa pod server port 1812 auth-type any server-key xxxxxx
>
>
>Ganbold wrote:
>
>>Hi,
>>I have problem using disconnect request for Cisco AS5300. I'm using
>>Radiator-3.8 radius server.
>>I use utility radpwtst to send disconnect-request directly to NAS but it
>>replies Disconnect-Request-NAKed.
>>Is there anybody who solved this problem before?
>>Is there anybody who successfully used POD and Disconnect-request in
>>Cisco AS5300?
>>What kind of attribute combination should I send to NAS?
>>What is Cisco IOS version known to work with disconnect-request?
>>Actually I tested disconnect request on Dial-UP Cisco NAS server and it
>>works just fine.
>>But it is NOT working on VoIP.
>>We are trying to implement this feature in VoIP application.
>>I appreciate very much if somebody can share its experience.
>>I tried with Session id attribute and no result. I even tried with
>>h-323-conf-id, h323-call-origin attributes, but didn't succeed.
>>Cisco AS5300 configuration:
>>aaa pod server auth-type any server-key xxx
>>Following is the debug output:
>>#debug aaa pod
>>#AAA POD packet processing debugging is on
>>#ter mon
>>#
>>Apr 8 00:23:47.933: POD: x.x.x.x request queued
>>Apr 8 00:23:47.933: POD: x.x.x.x user 37255740 0.0.0.0 sessid 0x0 key 0x0
>>Apr 8 00:23:47.933: POD: Line User IDB Session Id Key
>>Apr 8 00:23:47.933: POD: Sending NAK to x.x.x.x/50158
>>#
>>Cisco IOS version is :
>>Cisco Internetwork Operating System SoftwareIOS (tm) 5300 Software
>>(C5300-IS-M), Experimental Version 12.2(20020211:190758)
>>Debug log says request queued and sends NAK. What should I do? Can you
>>give me some recommendation?
>>
>>thanks in advance,
>>Ganbold
>>
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas@puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nas
>
>--
>***************************************
> Chatzithomaoglou Anastasios
>Network Design & Development Department
> FORTHnet S.A.
> <achatz@forthnet.gr>
>***************************************
>
At 12:51 AM 14.04.2004, you wrote:
>I have managed to make it work with the following command (using latest
>radiator version):
>
>./radpwtst -s routername -secret xxxxxx -auth_port 1812 -acct_port 1812
>-noauth -noacct -dictionary /usr/radius/radiator/cf/dictionary -code
>Disconnect-Request User-Name=usernameX
>
>"usernameX" is the user i'm trying to disconnect
I run same command in Radius machine to my VoIP gateway AS5300. Nothing
happens.
But when I run this command against Dial-Up AS5300 it works perfect.
Are you using it for Dial-Up or for VoIP gateway?
thanks in advance,
Ganbold
>AS5300 (12.2(15)T8)
>-------------------
>aaa pod server port 1812 auth-type any server-key xxxxxx
>
>
>Ganbold wrote:
>
>>Hi,
>>I have problem using disconnect request for Cisco AS5300. I'm using
>>Radiator-3.8 radius server.
>>I use utility radpwtst to send disconnect-request directly to NAS but it
>>replies Disconnect-Request-NAKed.
>>Is there anybody who solved this problem before?
>>Is there anybody who successfully used POD and Disconnect-request in
>>Cisco AS5300?
>>What kind of attribute combination should I send to NAS?
>>What is Cisco IOS version known to work with disconnect-request?
>>Actually I tested disconnect request on Dial-UP Cisco NAS server and it
>>works just fine.
>>But it is NOT working on VoIP.
>>We are trying to implement this feature in VoIP application.
>>I appreciate very much if somebody can share its experience.
>>I tried with Session id attribute and no result. I even tried with
>>h-323-conf-id, h323-call-origin attributes, but didn't succeed.
>>Cisco AS5300 configuration:
>>aaa pod server auth-type any server-key xxx
>>Following is the debug output:
>>#debug aaa pod
>>#AAA POD packet processing debugging is on
>>#ter mon
>>#
>>Apr 8 00:23:47.933: POD: x.x.x.x request queued
>>Apr 8 00:23:47.933: POD: x.x.x.x user 37255740 0.0.0.0 sessid 0x0 key 0x0
>>Apr 8 00:23:47.933: POD: Line User IDB Session Id Key
>>Apr 8 00:23:47.933: POD: Sending NAK to x.x.x.x/50158
>>#
>>Cisco IOS version is :
>>Cisco Internetwork Operating System SoftwareIOS (tm) 5300 Software
>>(C5300-IS-M), Experimental Version 12.2(20020211:190758)
>>Debug log says request queued and sends NAK. What should I do? Can you
>>give me some recommendation?
>>
>>thanks in advance,
>>Ganbold
>>
>>_______________________________________________
>>cisco-nas mailing list
>>cisco-nas@puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nas
>
>--
>***************************************
> Chatzithomaoglou Anastasios
>Network Design & Development Department
> FORTHnet S.A.
> <achatz@forthnet.gr>
>***************************************
>