Does anyone know how RSPAN works on Dynamic Vlan Ports?
I'm setting up Call Monitoring and I need to monitor the Voice Traffic
only. Monitoring via the vlan doesn't look like an option. These are
Cat 3550s running c3550-i9q3l2-mz.121-14.EA1.bin and
c3550-i9q3l2-mz.121-13.EA1a.
Switch Config
interface FastEthernet0/23
switchport access vlan 10
switchport mode dynamic desirable
switchport voice vlan 102
mls qos trust cos
wrr-queue cos-map 1 0 1
wrr-queue cos-map 2 2 3
wrr-queue cos-map 3 4
wrr-queue cos-map 4 5 6 7
priority-queue out
spanning-tree portfast
Monitor Session 1 source Interface fastethernet 0/23
Monitor session 1 destination remote vlan 202 reflector-port Gigabit 0/1
TIA
Scott
I'm setting up Call Monitoring and I need to monitor the Voice Traffic
only. Monitoring via the vlan doesn't look like an option. These are
Cat 3550s running c3550-i9q3l2-mz.121-14.EA1.bin and
c3550-i9q3l2-mz.121-13.EA1a.
Switch Config
interface FastEthernet0/23
switchport access vlan 10
switchport mode dynamic desirable
switchport voice vlan 102
mls qos trust cos
wrr-queue cos-map 1 0 1
wrr-queue cos-map 2 2 3
wrr-queue cos-map 3 4
wrr-queue cos-map 4 5 6 7
priority-queue out
spanning-tree portfast
Monitor Session 1 source Interface fastethernet 0/23
Monitor session 1 destination remote vlan 202 reflector-port Gigabit 0/1
TIA
Scott